COMB BUSBAR 3P AND N 12POLES
PRODIS COMB BUSBAR 1 P+N
COMB BUSBAR 3P AND N 24POLES
COMB BUSBAR 3P AND N 12POLES
PRODIS COMB BUSBAR 1 P+N
COMB BUSBAR 3P AND N 24POLES

Acti 9 Comb Busbar, 3L+N Balanced, 9 mm Pitch, 12 Modules, 80A

Catalogue Number: 21505
COMB BUSBAR 3P AND N 12POLES
PRODIS COMB BUSBAR 1 P+N
COMB BUSBAR 3P AND N 24POLES
COMB BUSBAR 3P AND N 12POLES
PRODIS COMB BUSBAR 1 P+N
COMB BUSBAR 3P AND N 24POLES
Retail
$211.58
RRP (Inc. GST)

Specifications

hide show
Range
Acti 9
Product or component type
comb busbar
Accessory / separate part category
connection accessory
Lines description
3L + N
Total number of 18 mm modules
12
Number of ways
12 ways N + 3 L (balanced)
Poles configuration for 1 way
  • 1 x 3P + N
  • 1 x 3P
  • 3 x 1P + N
    • Connection pitch
      9 mm
      Connector type
      tooth
      Distance between way
      54 mm
      Marking
      N L1 N L2 N L3
      Insulation
      insulated
      Device presentation
      cuttable
      [Ie] rated operational current
      80 A at 40 °C
      [Ue] rated operational voltage
    • 230 V AC Ph/N
    • 400 V AC Ph/Ph
      • [Ui] rated insulation voltage
        440 V AC conforming to IEC 61439-1
        [Uimp] rated impulse withstand voltage
        6 kV
        Mounting mode
        horizontal
        Mounting location
        top on tunnel type terminals
        9 mm pitches
        24
        Width
        216 mm
        Range compatibility
      • Acti 9 iDPN
      • Acti 9 iDPN Vigi
      • Multi 9 N40 Vigi N40 Vigi
      • Multi 9 N40
        • Standards
        • EN/IEC 60439-1
        • IEC 60947-7
          • Fire resistance
            960 °C ( 30 s ) conforming to IEC 60695-2-1
            Pollution degree
            3 conforming to IEC 60947-7
            Unit Type of Package 1
            PCE
            Number of Units in Package 1
            1
            Package 1 Weight
            127 g
            Package 1 Height
            3 cm
            Package 1 width
            3 cm
            Package 1 Length
            26.8 cm
            Unit Type of Package 2
            BB1
            Number of Units in Package 2
            12
            Package 2 Weight
            1.657 kg
            Package 2 Height
            17 cm
            Package 2 width
            7 cm
            Package 2 Length
            31 cm
            Unit Type of Package 3
            P12
            Number of Units in Package 3
            816
            Package 3 Weight
            124.472 kg
            Package 3 Height
            80 cm
            Package 3 width
            80 cm
            Package 3 Length
            120 cm
            REACh free of SVHC
            Yes
            EU RoHS Directive
            Compliant
            Toxic heavy metal free
            Yes
            Mercury free
            Yes
            RoHS exemption information
            Yes
            China RoHS Regulation
             Pro-active China RoHS declaration (out of China RoHS legal scope)
            WEEE
            The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
            Warranty
            18 months

            Frequently Asked Questions

            hide show

            What is the part number for the bus bar to suit the 4RCBE216/30S slim line RCBO ?

            The combination Busbars to suit the slim line RCBO's are the  21501 (12 pole) or 21503 (24 pole)
            For more information on this product range please visit the Clipsal web site on the link provided.
            https://www.clipsal.com/Trade/search-results?q=4rcbe210/30s
             

            What would be the replacement part for the 4BB5/26.

             21501 for a 12 module and a 21503 for the 24 module. these are a Schneider part which is equivalent to the 4bb5/26
            Clipsal’s range of busbars are available in 63A - 250A versions and have been specifically designed to make installations quicker and easier.
            Please see following link for further information and complete range.
            https://www.clipsal.com/Trade/Products/ProductDetail?catno=4BB5/26

            What comb busbar can you use with the A9D73620?

            You can use the 21501 Comb Busbar PH and N 12 Poles.

            what are the dimensions for a T100, T100F, T150, T150LF, T150F

             140 x 94 x 81mm ( L x W x D)

            What is the dimensions of a T150, T150LF, T150F

             140 x 94 x 81mm (L x W x D)

            PowerSCADA Expert 8.2 Update 5 - Release Notes

            Issue
            What is new in PSE8.2 and a detailed listing of resolved problems and minor enhancements.

            Product Line
            PowerSCADA Expert 8.2 (PSE8.2)

            Environment
            Installer
             
            Cause
            A new PSE8.2 cumulative update release.

            Resolution
            PowerSCADA Expert 8.2 Update 5 - Release Notes
            Release Notification (Updated 25 April 2018)

            This is a detailed listing of resolved issues and minor enhancements in this release.

             


             

            Prerequisite

            You must have PowerSCADA 8.2 installed prior to installing this update. No previous updates are required.

            Cybersecurity Announcement

            Floating License Manager v2.1 addresses vulnerabilities in the Flexera FlexNet Publisher component detailed in CVE-2016-10395, CVE-2017-5571 and CVE-2016-2177. Uninstall the current version of the Floating License Manager, and then install version 2.1.
            NOTE: The Floating License Manager v2.1 installer is included with this hotfix release but is not a part of the hotfix installer. Unzip "Floating License Manager v2.1.zip" and run "setup.exe".

            Important Notice: There is a known issue with the Floating License Manager v2.1.0.0 installer. When installing with a logged-in Windows User name containing a space, the install will not succeed. The workaround is to install the Floating License Manager with a user that does not include a space character in their name.

            Bug Fixes and Enhancements

            TFS 21482 - AlarmEvents with a state of normal returned in GetAlarmEvents response for EWS

            GetAlarmEvents was changed to not return alarms in the normal state.

            TFS 21483 - Incorrect timestamp information provided for AlarmEvents not in the Active state

            Alarm timestamps are now updated to reflect the true timestamp of occurrence for all state changes (active, drop out, acknowledge).

            TFS 21484 - Unable to filter AlarmEvents by Type using EWS

            Alarms are now filtered based on type. 

            TFS 21485 - Unable to successfully acknowledge alarms using EWS

            In some situations, EWS would not acknowledge alarms correctly.  This behavior has been fixed.

            TFS 21486 - Unable to filter alarms using the PriorityTo and PriorityFrom fields

            EWS did not observe the priority field correctly. This has been addressed and the minimum allowable priority has been set to 1 (to exclude non-alarm objects in the PowerSCADA alarm database).

            TFS 21557 - PowerSCADA projects - including the starter project, PLS_Include, and PLS_Example - need to be upgraded to support the new DBF schemas

            PowerSCADA projects have been upgraded to the latest DBF schemas.  If there are existing projects created from the starter project, set [CtEdit] Upgrade = 1 in the Citect.ini file using the Setup Editor, and then restart PowerSCADA Studio.

            TFS 21564 - Alarm Proxy does not show the analog alarm states

            Alarm Proxy now reports the analog alarm states (HIGH HIGH, HIGH, LOW, LOW LOW) instead of ON / OFF.

            TFS 21566 - If a CSV file that does not exist is selected in the I/O Device Manager, the application throws a runtime exception

             

            A message is displayed indicating that the file does not exist.

             

            TFS 21569 - On large systems with 200k configured alarms, the GetAlarmDefinitions call in Alarm Proxy is slow and causes ENM to timeout

            Performance issue in alarm proxy has been resolved.

            TFS 21649 - When CoreServiceHost adds and removes devices, it may lose the original IDs

            CoreServiceHost now keeps a device chronicle.  When the device is removed and then later added, the ID will remain the same.

            TFS 21913 - If the equipment name is changed in the system, but the I/O Device name is unchanged, CoreServiceHost will not refresh the equipment name

            CoreServiceHost now properly updates the equipment on name change.

            TFS 21935 - Logs that are too large for the Windows Event Log do not get logged properly

            Large logs are now broken down into smaller log entries.

            TFS 21970 - Profile Wizard and Automation does not support IPv6

            Profile Wizard and Automation now supports IPv6 for TCP/IP Board level drivers.  This requires the TCP/IP Driver version 4.0.0.0 or later.

            TFS 21975 - Open and Close buttons are disabled at runtime on equipment popup when separate digital tags are used for commands

            The form now enables the command buttons if the Pos_On or Pos_Off tags are defined.

            TFS 21979 - Alarm Proxy cannot return alarms that transition to inactive

            This setting is now configurable in the Application Configuration Utility.

            TFS 22043 - Single sign-on calls from a remote thick client do not work

            Single sign-on now detects remote clients.

            TFS 22060 - The I/O Device Manager cannot bulk import devices with device names greater than 16 characters

            The I/O Device Manager now reads the device name length from the equipment.profiles file for proper validation.

            TFS 22066 - Wonderware ArchestrA Logger Security Patch

            Wonderware ArchestrA Logger Patch 2017.517.2328.1 is applied.

            TFS 22150 - Alarm filters do not work on some resolutions

            Alarm filter AN numbers are fixed for all alarm page resolutions.

            TFS 22155 - Alarm filters perform exact matching

            The alarm filter screen allows the user to select the filtering mode. The default setting is read from the INI file [Alarm] FilterMode.  0 (default) = Exact Match, 1 = Starts With, 2 = Ends With, 3 = Contains.

            TFS 22306 - The equipment tree used on alarm pages is slow to render over the web client

            Any page using the equipment tree should set the default library and symbol on the equipment tree genie, or set 'Hide Symbol Icons' to 'TRUE' if a default icon is not available.

            TFS 22401 - Alarm filter and equipment tree filter operate independently

            The alarm filter and equipment tree filter operate together to filter the alarm tables.

            TFS 22896 - Core service host logs two warnings during shutdown - exception thrown during disposal.

             

            Cleanup methods were reworked to prevent the exception.

             

            TFS 22898 - EWS cannot obtain tag updates at a 5 second rate

            EWS and core services were updated to obtain data at a 5 second poll rate.

            TFS 23262 - Equipment popup alarm table does not acknowledge or disable alarms

            Alarms can now be acknowledged or disabled in the equipment page.

            TFS 23274 - Equipment.profiles cannot be imported into the Profile Editor in cases where the original Device Types and Device Profiles were lost

            The Profile Editor can import the equipment.profiles file to generate device types, device profiles, and tags.

            TFS 23437 - Citect 2016 Updates

             

            Citect 2016 Update (April 10, 2018) is included with this update.

            Project ID management was removed from Citect 2016.  Project IDs are now located in the ProjectInfo.xml file. 

            MinUnitNumber and MaxUnitNumber (previously stored in UnitNumberRange.xml) have also been migrated to ProjectInfo.xml.

             

            TFS 23637 - The Alarm Summary page does not display state information

            The Alarm Summary page now displays the state that caused the alarm.

            TFS 23650 - 8.2 install does not enable ASP feature within IIS

            The installer now enables the ASP feature under IIS. This server role feature is required to run the Citect web control client. (Previously the View-Only web client was the only option for web deployment.)

            TFS 24205 - When Core Services receives a timeout from the Client, alarm processing may halt until the service is restarted

            Core Services properly recovers from a ctApi deadlock condition.

            Files Modified

            Applications\AppServices\bin\Framework.dll
            Applications\AppServices\bin\Framework.ServiceHost.exe
            Applications\AppServices\bin\Modules.CoreServices.dll
            Applications\AppServices\bin\PowerLogic.Cipher.dll
            Applications\AppServices\bin\Modules.ProviderBase.dll
            Applications\AppServices\bin\Modules.ProviderEngine.TestHarness.exe
            Applications\AppServices\bin\ObjectFactoryTools.exe
            Applications\AppServices\bin\ProviderGatewayProviders.dll
            Applications\AppServices\bin\PowerSCADA.Common.dll
            Applications\AppServices\bin\Modules.Platform.Citect.dll
            Applications\EWS\bin\Framework.dll
            Applications\EWS\bin\EWS.dll
            Applications\EWS\Web.config
            Applications\EWS\DataExchange.svc
            bin\de\ProfileEngine.resources.dll
            bin\de\ProfileWizard.resources.dll
            bin\de\WizardLibrary.resources.dll
            bin\es\ProfileEngine.resources.dll
            bin\es\ProfileWizard.resources.dll
            bin\es\WizardLibrary.resources.dll
            bin\fr\ProfileEngine.resources.dll
            bin\fr\ProfileWizard.resources.dll
            bin\fr\WizardLibrary.resources.dll
            bin\it\ProfileEngine.resources.dll
            bin\it\ProfileWizard.resources.dll
            bin\it\WizardLibrary.resources.dll
            bin\ja\ProfileEngine.resources.dll
            bin\ja\ProfileWizard.resources.dll
            bin\ja\WizardLibrary.resources.dll
            bin\ko\ProfileEngine.resources.dll
            bin\ko\ProfileWizard.resources.dll
            bin\ko\WizardLibrary.resources.dll
            bin\ru\ProfileEngine.resources.dll
            bin\ru\ProfileWizard.resources.dll
            bin\ru\WizardLibrary.resources.dll
            bin\zh-chs\ProfileEngine.resources.dll
            bin\zh-chs\ProfileWizard.resources.dll
            bin\zh-chs\WizardLibrary.resources.dll
            bin\zh-cht\ProfileEngine.resources.dll
            bin\zh-cht\ProfileWizard.resources.dll
            bin\zh-cht\WizardLibrary.resources.dll
            bin\ProfileAutomation.dll
            bin\ProfileEngine.dll
            bin\ProfileWizard.exe
            bin\WizardLibrary.dll
            bin\ProfileAutomationUtility.exe
            bin\CommsMethodProperties.xml
            bin\DeviceManagementUserControlLibrary.dll
            Applications\Profile Editor\Tags.xml
            Applications\Profile Editor\ProfileEditor.Business.dll
            Applications\Profile Editor\ProfileEditor.exe
            Applications\Profile Editor\ProfileEditor.UserControls.dll
            Applications\Profile Editor\Resources\ProfileEditor.UserControls.resources
            User\PLS_Include\*
            User\PLS_Example\*
            Starter\Default_Starter.ctz

            Installation

            Unzip "PowerSCADA Expert 8.2 Update 5.zip" and run "PowerSCADA Expert 8.2 Update 5.exe".

            Are the SCADAPack RTU products comply with IEC 61508 standard?

            IEC 61508 is about functional safety of a system, or SIL (safety integrity level) compliance. 
            Our SCADAPack’s are not designed with 61508 and as such do not comply with it. 
            None of SCADAPack's are designated as functional safety equipment.

             

            Where can I find the characteristics of the LC1D contactors?

            You will find all the characteristics of LC1Dxx contactors on the Tesys web page:
             
            The section Downloads has documents ( Catalogues, Brochures, Catalogue pages, Tech publications, Certificates, etc...) that you can download free

            See the following documents in the online catalogue: 24505; 24506 and 24533
            (Use the search bar on the top right hand side of the web site to search for these particular documents)

            Is there a non metallic circuit breaker enclosure available for the Molded Case Circuit Breakers?

            Issue:
            Is there a non-metallic (ie. fiberglass, etc) breaker enclosure for MCCBs?

            Product Line:
            Circuit Breaker Enclosure

            Environment:
            Square D Breaker Enclosure

            Resolution:
            There are no circuit breaker enclosures available for molded case circuit breakers that is manufactured from a non metallic material. Only metal type enclosures are available.

            What is the minimum ceiling cavity for a 7600ATP?

            The minimum recommended cavity to instal 7600atp is 215mm the unit itself is 180mm high.

            Procedure for Resetting accumulated Energy from the front panel of the Series 2000 Circuit Monitor (CM2000)

            Issue
            Resetting Accumlated Energy (Watthours and Varhours) in a CM2000 via Front Panel Display

            Product Line
            CM2000 series meter

            Environment
            Accumulated energy reset

            Resolution

            Below is the steps to follow to reset accumulated energy from CM2xxx front panel:

            1. Use the MODE button to change to [Setup] mode, and the circuit monitor displays “ConFig.”

            2. Press the blue down arrow button until the display says “rESETS.”

            3. Press the Enter (Phase) button to go into Resets Mode, and enter the 0000 password as you did before.

            4. Press the PHASE [Enter] button until the Watthour Meter, AND the Varhour Meter LED’s are lit.

            5. Press the up arrow SELECT METER [Value] button to change the circuit monitor display from No to Yes. This means: “Yes, I want to reset these values”. 

            6. Press the MODE button once to get ready to do the resets.

            7. The red LED next to [Accept] should be flashing. To perform the reset(s), use the blue arrow button to change the No to Yes, and then press the [Enter] button. This is when the reset happens.

            8. The circuit monitor performs the resets and returns to METERS mode.

            Note: A special “Reset” password can be set up to allow an operator to perform resets only. The master password can then be protected to prevent unauthorized or inadvertent changes to circuit monitor configuration values, alarm and relay setup, etc.

            There is a pdf document attached to this article with the instructions above.

            Video: Where is the wiring diagram located and what information does it contain and where is the date code located on ALL the molded case circuit breaker enclosures?

            Issue:
            Product Design Features

            Product Line:
            Circuit Breaker Enclosures

            Environment:  
            Wiring diagram location and information

            Cause:
            Specifications and Date Code for product

            Resolution:
            NOTE: This information will generally apply to ALL the Molded Case Circuit Breaker Enclosures(The F-frame, B-Frame, H-frame, the J-frame, the L-frame, the M-frame and P-Frame). But for the video a J250S was used.




            The wiring diagram on the circuit breaker enclosures will be located on, one of the inside sidewalls of the enclosure. All the necessary information for the enclosure will be on the wiring diagram and will contain the following;
            1) Catalog and series number of the enclosure
            2) What type of Circuit breakers that can be used
            3) Any accessory that can be used in the enclosure, like the solid neutral and equipment ground kit
            4) The UL listed catalog number Prefixes for the breakers that can be used in the enclosure
            5) Maximum wire sizes for the enclosure(NOTE: Sometimes the breaker can accept larger wire, BUT the enclosure wire bending space will be limited to what the wiring diagram shows)
            6) The Wiring schematics
            7) The Short Circuit Current Rating information for each breaker at each voltage level
            8) The Date code. The date code will be an ink stamp, generally located on the inside back wall of the enclosure. The Date Code will be a 5 or 6 digit code and will read as follows; first two digits = year, the 2nd two digits = week of the year, the 5th digit = the day of the week and the last digit(if used) = the shift. For example, 183241 is year - 2018, week of year -32, day of week - 4 and shift - 1. (Aug. 9th, 2018)
            Show More