Cable Management Pressed Metal Conduit Fittings, Earth Clip 40mm, 32mm WP

Why are ComPact NS/ PowerPact P, R breakers not available in the device selection list of Com’X 210/ 510?

How to select a device profile for these breakers during commissioning process?
The ComPact NS/PowerPact P, R breakers discover as MasterPact breakers. ComPact NS/PowerPact P, R breakers do not appear in the device selection list of the Com’X 210/ 510, so user is unable to select these devices.

Product Line
Com'X 210: All firmware versions
Com'X 510: All firmware versions

Environment
ComPact NS/PowerPact P, R breakers on Com’X 210/510 network.

Cause of Issue
Com’X includes support for the MicroLogic trip units A, E, P, H which are used by MasterPact, PowerPact P, R/ComPact NS breakers. Com’ X supports the PowerPact/Compact NS breakers as MasterPact breakers. The PowerPact P, R/ComPact NS do not display in the device selection list.  

Prevention
N/A

Detection
N/A

Resolution
To create a PowerPact P, R/ComPact NS breaker within Com’X:
1.Select a MasterPact breaker with corresponding MicroLogic trip unit (A, E, P, H) from the Device Type drop-down list.
2.Rename it as PowerPact P, R/ComPact NS breaker.
Click Create to create the PowerPact/Compact NS device.

 What does Warning 2107 means in Vijeo Designer

Issue

Product Line

 Vijeo Designer

Environment

Cause

Resolution

Warning 2107: Target Security is enabled, and Web Gate security is disabled. You cannot write to variables from Web Gate.

This message displays when you have set Target Security to Use Security, and Web Gate Security is disabled. You need to enable Web Gate security so you can properly log in and  write to variables from Web Gate.

To resolve the warning message:

In the security properties for the target, enable the Web Gate/Web Server Security property by setting it to Use Security.