switch 3g horiz 10a 250v

Flush Switch, 3 Gang, 250VAC, 10A, Series 2000, Standard, Horizontal

Catalogue Number: 2033HA
switch 3g horiz 10a 250v
Colour: White Electric
Colour: Per UOM Std.
  • Cream 1 PCE
  • White Electric 1 PCE

Specifications

hide show
Range of product
Series 2000
Product brand
Clipsal
Device presentation
basic element with full cover plate and grid
Switch function
1-pole
Actuator
rocker
Number of rocker
3
Number of poles
1
Device mounting
flush
Fixing mode
by screws
Material
PC (polycarbonate)
Surface finish
glossy
Local signalling
without
[Ue] rated operational voltage
250 V AC
Rated current
10 A
Marking
without marking
Sustainable offer status
Green Premium product
REACh Regulation
Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure
ENVPEP120506EN
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Technical Leaflet

  • Installation Instruction

  • Product Environmental

  • Operating Manuals

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Can you still get a 2033A in Desert Sand?

Do you make a 2031VHA like the 2032VHA?

Unfortunately, we only make a 2 gang version.

Can I purchase a replacement mechanism for the 2033CC & C2033CC credit card switches?

Yes, a 2036VC-4-WE  16A mechanism would suit the 2033CC & C2033CC ving card switches.

For further information please visit https://www.clipsal.com/Trade/search-results?q=2036VC-4-WE.

What is the part number for a mounting block to suit a C2033A?

Unfortunately there is no mounting block for this product.

What is the part number for the Surround to suit a 2034A ?

The part number is a 2003/4-WE , this is the surround for both 3 and 4 gang architrave plates in the 2000 series
For more information please visit the Clipsal website on the link provided.
https://www.clipsal.com/Trade/search-results?q=2003/4
User-added image
 

What is the operating and storage temperature of the I range (iSW) switches.

There are two types of I range switch (iSW Switches) they have different properties and temperature ranges
The difference is the ISO Standard that the product is manufactured to comply with:
  • IEC/EN 60669
  • IEC/EN 60947-3
For 20-32A they comply with IEC/EN 60669
For 40-125A they comply with IEC/EN 60947-3

The operating temperature of I range switches is:-
  • For IEC/EN 60669 devices between - 20°C...+50°C without derating.
  • For IEC/EN 60947-3 devices -25...+60 °C without derating.

Their storage temperature must be:-
  • For IEC/EN 60669 devices between - 40...+100°C
  • For IEC/EN 60947-3 devices between -40...+85 °C

Does Clipsal offer 5 gang architrave switch plate?

Unfortunately not. We do not have a 5 gang architrave switch plate. 4 gang is the biggest we make in architrave size and the part numbers are 2034A and 34A. 
For further information, please visit 
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2034A​
https://www.clipsal.com/Trade/Products/ProductDetail?catno=34A



 

When using the 140 EHC202 00 High Speed Counter, how do I reset my counter value(s) to zero, or maximum value?

Using the "Parameter" screens the module is configured for its set points,max value
and mode of operation. To reset the count is a simple matter of sending a command
to the first 4x register of the module's I/O map reference. Prior to doing anything you
should be aware of the terminology involving this module.

Reset: Turning off the output coils associated with the card. Reset has nothing to do
with your count values being set to 0 or max value.
Preset: This can be a hardware input or software command. Preset will set your current
count to zero if your counting up, or to max value if your counting down.

 To perform the initial start up of the module you can send any of the following commands
 based upon the number of counters being used. The value should be sent to the 1st
 4xxxxx or %MW assigned to the module in the IO Map.

Startup
To Preset and Enable counters 1 and 2... Send the value 233H to the module.
To Preset and Enable counter 1 only......... Send the value 203H
To Preset and Enable counter 2 only..........Send the value 230H

 Following the Preset and Enable command you will send the Read command to the 1st
4xxxxx or %MW reference assigned to the module in the IO Map

 Read Counters  1 & 2  ...............................Send the value 300H


Run Time
  Once the PLC application is running and you wish to Preset and Enable counters 1 & 2
 send the following commands to the EHC202.

To Preset and Enable counters 1 and 2... Send the value  0033H to the module.
To Preset and Enable counter 1 only......... Send the value  0003H
To Preset and Enable counter 2 only..........Send the value  0030H


If you want to know what the last count was prior to Preset send a 400H command. This command
will buffer the last count seen by the counters just before the Preset command arrived.

Remember, you can Preset the module with hard wired inputs to the Preset input of each counter or
you can use the software Preset described here. A hardware Preset is accomplished by pulsing the
Preset input terminal on the EHC 202 for counter 1or counter 2. It is permissible to use both methods
simultaneouslyif you wish. Follow the wiring diagrams in the Quantum Hardware Reference Guide
they are accurate and should be relied upon for proper module operation.
 


Legacy KB System (APS) Data: RESL6011 V2.0, Originally authored by on , Last Edited by on
Related ranges: Modicon Quantum