This is not done by clipsal but an outside contractor please contact PLACARD in NSW on 02 9588 8200 Contact Helen Perente
Unfortunately there is no mounting block for this product.
Are there any interchangeable parts between the old XA2 and XB2 lines and the new XB4 and XB5 Harmony products?
Products sold in the United States.
No ....other than a few incandescent light bulbs
CTA-ID : 2033545
Are the Wiggy voltage testers NFPA70E certified?
Obsolete Square D voltage testers.
The NFPA70E is the Standard for Electrical Safety in the Workplace. This Standard does not actually provide for certification of individual pieces of equipment. This is a Standard, not a certification document. The Wiggy`s are UL/CSA/ANCE certified.
Update: The Wiggy line of voltage testers is obsolete and no longer available, no replacement. Consider another manufacturer for this product.
CTA-ID : 2033348
What the the dimensions of the XALD02 enclosure?
Harmony Control Stations
It is 4.17 inches High, 2.68 inches wide and 2.09 inches deep.
What is suffix C50?
Harmony 22mm pushbuttons and selector
C50, indicates a package of 50 pieces of ZB4BD3 selector switch.
"The APC Netbotz product range has SNMP crawler support for APC products, MGE products, as well as third party manufacturers. Listed below are major manufacturers supported by the SNMP crawler with a list of common supported products broken down by manufacturer below.
Info from: https://www.liebert.com/dynamic/displayproduct.asp?id=921&cycles=60hz
AP 200 UPS
Series 300/301 UPS
Series 600 System Control Cabinet
Series 600 Single Module System UPS
UPStation D/Select UPS
UPStation S UPS
UPStation S3 UPS
Hiross 7200 (Italy)
Hiross HiPulse (Italy)
Deluxe System 3
Static Switch 2
Pulsar EX RT
Comet EXt RT
Galaxy 1000 PW
Galaxy PW Harmony
Info from: https://www.powerware.com/ups/connectivity/connectups_snmp.asp
Powerware 9 Prestige
Info from: https://www.meau.com/eprise/main/sites/public/PRODUCTS/Uninterruptible_Power_Supplies/NetCom/default
7011A Series (1kVA to 3kVA, 6kVA to 12kVA)
Info from: https://www.powerware.com/UPS/BestPower/Products.asp
Best Power 610"
Checking on the difference between the 9001KM1L* and the 9001KM38L*, both are listed for 120 volts.
9001KM Light Modules
Push Button and Operator Interface
The 9001KM1L* is a transformer style light module with a 6 volt LED lamp for 120 volt AC input. The 9001KM38L* is a resistor style light module with a 12 volt LED lamp for 120 volts AC or DC input.
Harmong Tower Lights and Beacons
XVB 70mm Diameter (2.75 inches)
The XVBC9B terminals are not polarity sensitive.
Issue: ATV31 drive is set up to run with 2 preset speeds and will only run at 10Hz regardless of the programmed value for SP2 (ex. SP2=60Hz).
Product Line: ATV31
Cause: Preset speeds
Resolution: Verify that the logic input used for PS2 is not set to perform another function. For example, when ATV31 drive is configured for 3-wire control, LI4 will be set for JOG. The jog function will have priority. If jog function is not required, JOG in the FUn menu needs to be set to nO.
The functions of each logic input can be verified in the SUP menu. Go to sub-menu LIA. Scroll to the desired input (LI1A, LI2A. . . ) Enter to see to what the function of the input is assigned. Scroll up and down to see if there are additional functions assigned.
What is included in the SR2PACKFU?
Zelio Smart Relays
1 SR2B121FU Zelio logic relay
1 SR2USB01 cable
1 CD containing the latest version of ZelioSoft