perm. connection unit sw 16a

Permanent Connection Unit Switch 16A

Catalogue Number: 2032VTB
perm. connection unit sw 16a
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart

Specifications

hide show
Range of product
Series 2000
Product brand
Clipsal
Device presentation
basic element with full cover plate
Actuator
rocker
Number of rocker
1
Local signalling
without
[Ue] rated operational voltage
250 V
Rated current
  • 16 A
  • 16 AX, fluorescent lamp
    • Marking
      without marking
      EU RoHS Directive
      Compliant

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Installation Instruction

      • Product Environmental

      • Operating Manuals

      • Specifications

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      Do you make a 2031VHA like the 2032VHA?

      Unfortunately, we only make a 2 gang version.

      ​Is there an alternative C-Bus Switch for 5032NL-WE?

      Yes, one off 2032VH + one off 5031NMML + one off 5031NMS

      Will any 30 mech fit in the 4032VH?

      Yes any 30 mech will fit

      What is the part number for a Brass cover for the classic range 2 gang switch - C2032VA?

      The part number for a Brass cover for the classic range 2 gang switch - C2032VA is - C2032C-BS

      For further information visit link below:-
      https://www.clipsal.com/Trade/search-results?q=C2032C-BS
      User-added image

      What is the white cover plate for a 2031VCS

      The part code is 2000-WE surround cover plate

      What is the part number for the key only for the 2036VKT4?

      The part number for the key only for the 2036VKT4 is 2036VKT.

      Some of the key features are:
      • To suit 2036VKT and 36VKT series switches
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2036VKT
       

      Does the 2031V66 come in architrave?

      No it doesnt

      ​Is there an alternative C-Bus Switch for C5032NL-WE?

      Yes, one off C2032VH + one off 5031NMML + one off 5031NMS

      Can the mech from 2031VETF be bought seperately ?

      No, the mech is intergrated into the grid, and cannot be purchased seperately.

      What are the part numbers for a single / double prestige grid and plates and mechs

      Part numbers are P2031VH (single) P2032VH (double) P30M (Mech)

      How long is the cable that comes with the 2032HWS?

      That cable is 1.8m long.

      Will 2 x 30USBCM's fit into a C2032VH?

      Yes they will fit into a C2032VH.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCM 
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2032VH 




       

      What parts replace the 2032VTB-WE complete assembly?

      not complete anymore, need to order below
      2032VH-WE and 30M-WE and 38TB-WE 

      Can the 2031VETR switch 24V DC?

      No, it is only for 240V~.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR

      Do you do the 2031V66 with double pole switches?

      No, the 2031V66 does not have double pole mechanisms.

      Some of the key features are:
      • Switches have been re-designed to provide mechanisms that can be re-orientated horizontally or vertically
      • 1 gang weatherproof switch

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031V66

      Can the 2031VETR be two wayed?

      Yes the 2031VETR can have a remote switch wired to it.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR

      Does the 2031VETR switch an exhaust fan?

      Yes the 2031VETR will switch small motor loads. (maximum 2A)

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR


       

      Does the 2031VETR have dip switches?

      Yes, the 2031VETR does have dip switches.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR

      Can the grid for the 2031v66 be purchased without mechs?

      No, We do not supply or encourage this as the 2031v66 has a specific gasket set up to ensure weatherproof rating and this may be compromised if tampered with therefore we only sell them assembled.

      What is the mech that fits in the 2031V66 switch?

      Unfortunately we dont do the mech as a spare part it is essentually a 30 mech with a rubber seal between the contacts ant the dolly and we dont do that mech as a spare part.

      What will make up a double pole/double throw switch with a 24V Neon indicator in a plate

       Part codes you need  30MD2 + 30N24 + C2032VH

      Can part number 30M35 be used in 2031V66?

      No. Unfortunately, part number 30M35 CANNOT be used in 2031V66.

       

      Can the 2031VETR and 2031VETR3 operate without a neutral?

      The 2031VETR3 will not operate without a neutral however the 2031VETR WILL operate without a neutral as it was designed purely as a 2 wire device I.e. Active & Switched Active.

      Will changing the cover on the C2032V66 affect the IP rating ?

      Changing the Cover ( C2032C ) does not affect IP rating as long as mechs not changed

      For more information regarding this product please visit the Clipsal web site on the link provided

      https://www.clipsal.com/Trade/search-results?q=c2032v66

      What is the catalog number for the green 12-pin connector for Micrologic trip units on Powerpact P and R frame breakers?

      Product Line:
      Circuit Breakers

      Environment:
      Electrical Distribution Equipment

      Resolution:
      The trip unit connector is cat. no. S33100. It includes terminal identification markings.

      What is the time delay available on the 31VETF or 2031VETF?

      The 31VETF Series is adjustable to allow fans to continue to run from 3 minutes to 10 minutes (approximately) after the lighting is turned off. The delay adjustment is accessible on the
      rear of the device.

      Is the 2031vetr available in the C2000 series?

      It is only available in either the standard series ( 31VETR) or 2000 series ( 2031VETR)

      Is mech only available for part number 2031VETR?

      No the mech comes only complete in plate.

      Do the 9001KY, 9001KYSS, 9001KYAF, and 9001SKY enclosures have a UL File number?

      Issue:
      Do the 9001KY, 9001KYSS, 9001KYAF, and 9001SKY enclosures have a UL File number?
      Product Line:
      30mm Enclosures                           
      Environment:
      9001KY/SKY Control Stations
      Cause:
      To clarify the certification for an application.
      Resolution:
      The enclosures are not electrical. They will have enclosure ratings, but no UL testing is done on the enclosures. It will be UL when installed with UL components. See page 17-55 Digest 173.
       

      What are the A, B, C, D, E, F, G, H, and J ground fault ampere values for the Micrologic 6.0A, 6.0P, and 6.0H on the 1600A Masterpact breaker NW16H2?

      Product Line:
      Circuit Breakers

      Environment:
      Electrical Distribution Equipment.

      Resolution:
      For all 1200A sensors and greater they are 500A, 640A, 720A, 800A, 880A, 960A, 1040, 1120A, and 1200A respectively.

      What is the current rating for the ZB2BE101 and ZB2BE102 contact blocks?

      Issue:
      What is the current rating for the ZB2BE101 and ZB2BE102 contact blocks?

      Product Line:
      Harmony Push Buttons

      Environment:
      Harmony 22mm

      Cause:
      Product Specifications

      Resolution:
      They have a NEMA A600 rating of 10A continuous.

      What was a Unitized EZ Stack meter center?

      Issue:
      Product Features

      Product Line:
      Unitized EZ Metering Equipment

      Resolution:
      The Unitized EZ Stack devices were self-contained meter centers, available with up to six disconnecting means. The 100 ampere devices accepted field installed Type QO or Q1 tenant breakers. The 125 ampere and 150 ampere devices were supplied with factory installed Type Q2 tenant breakers. This product line is obsolete. The current offering for this application would be MP METER-PAK.


       

      What is the part number for 610 Telephone socket and mounting plate , with Brushed Aluminium cover?

      The part number for 610 Telephone socket and mounting plate , with Brushed Aluminium cover is - C2031VTO & C2031VTOC & 3110SK610
      For further information , visit links below:-
      https://www.clipsal.com/Trade/search-results?q=C2031VTO
      https://www.clipsal.com/Trade/search-results?q=C2031VTOC
      https://www.clipsal.com/Trade/search-results?q=3110SK610
      User-added image

      What is the timing range for a 2031VETR-WE?

      The timing range for a 2031VETR-WE is 15 seconds to 254 minutes.
      Please see following link for complete range
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR3

      What is the minimum load for a 2031VETR?

      The minimum load for a 2031VETR is 20mA.

      For more information, please refer to the link:
      https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001508.pdf 

      ​Is there an alternative C-Bus Switch for SL5032NL-WE?

      No alternative with the same style look, but it can be replaced with a different style look with the same functionality switch.
      1. It can be replaced with Classic C2000 Series Grid Plate and 30 Mech switches, one off C2032VH + one off 5031NMML + one off 5031NMS
      2. It can be replaced with Slimline SC2000 Series Grid Plate and 30 Mech switches, one off SC2032VH + one off 5031NMML + one off 5031NMS

      Is there a Saturn series 2 Gang USB Outlet?

      Unfortunately, no this is not something we have available currently.
      At this stage, you will need to build your own out of components

      You would need the following components:

      1X 4032VH, color selections and other information available at https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=4032VH
      2X 30USBCM, Further information available at https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCM
      1 pack USBC-CAPS, color selections and other information available athttps://www.clipsal.com/Trade/Products/ProductDetail?catno=USBC-CAPS

      User-added image
      User-added image

      User-added image
       

      How does 2031VETF run on timer switch operate?

      The Clipsal 2031VETF Series is an electronic time delay switch which provides extended exhaust fan operations to ensure proper ventilation in bathrooms and toilets. It uses a single switch to operate both lighting and an exhaust fan. Both loads switch on simultaneously when the switch is operated, but when the lighting is turned off, the exhaust fan continues to run for several minutes.
      Time Delay Intervals Available:
      The 201VETF Series is adjustable to allow fans to continue to run from 3 minutes to 10 minutes (approximately) after the lighting is turned off. The delay adjustment is accessible on the rear of the device.
      Operation:
      Turning on the switch will cause both the lights and the fan to operate. The electronic timer starts when the switch is turned off. The lights are controlled directly by the switch, however, the fan will run for its preset timer period when the lights are turned off. Turning the lights on and off again, while the fan is still running, will cause the timer period to restart.
      The fan will activate for a timer cycle whenever power is re-applied to the unit. eg. initial installation, power failure/return, fan replacement.
      for further information. please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETF
      User-added image

       

      is there a push button timer which i can place in a switch plate with other switches

      We do not do a timer which is removable, the closest is a 2031VETR3-WE.
      This comes on it's own plate which it cannot be removed from.
      This timer allows the operator to push the button and will remain on until the time has lapsed.
      please see below link for more information.
      https://www.clipsal.com/Trade/search-results?q=2031vetr

      Is there a timer switch in Saturn Series available?

      No, however you can use the timer 2031VETR  as a remote timer ie place it in the ceiling and have cables running to a Saturn Series plate with a bell press. When the bell press is pressed it will trigger the 2031VETR.

      Bell press part number is a 60PBBP

      The saturn series plate less mechanism is 4061VH.

      Is the 2031V66 switch 2 way compatible?

      Yes, as it is based on 30 series mech with 4 terminals it is 2 way compatible.

      Some of the key features are:
      • 1 gang weatherproof switch
      • Standard size gridplate and surround complete with one 30M switch
      • Vertical mount
      • 116 mm Length x 76 mm Width x 30 mm Depth
      • 84 mm apart Mounting centres

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031V66

      What is the part number for an OFF delay timer for a 20amp strip heater?

      There is no OFF delay timer that has 20amp rating .
      You can use run on timer  , 2031VETR , controlling 20amp contactor with 240VAC coil - LC1D09U7 for 20amp resistive load
      For further information , visit link below:-
      https://www.clipsal.com/Trade/search-results?q=2031VETR
      https://www.schneider-electric.com.au/en/search/LC1D09U7
      User-added image

      What are the part numbers needed for remote mounting the ATV61/71 VW3A1101 keypad?

      Issue:
      What are the part numbers needed for remote mounting the ATV61/71 VW3A1101 keypad?

      Product Line:
      VW3A1101 keypad for ATV61 ATV71 drives

      Environment:
      All

      Cause:
      Needs to get the part number for the remote bezel, cable and door for the ATV61 and ATv71 keypad display.

      Resolution:

      The mounting kit, including bezel and hardware is VW3A1102

      The Modbus cables to connect the keypad to the control basket of the drive are:
      1 Meter -      VW3A1104R10                        
      3 Meters -    VW3A1104R30
      5 Meters -    VW3A1104R50
      10 Meters -  VW3A1104R100


      The clear plastic door (IP 65 rating) to cover the keypad when not in use is VW3A1103








       

      Is the 2000 Series or C2000 IP66 Rated?

      No, unfortunately 2000 series products are not IP66 Rated.
      However, we do offer a very limited range in the C2000 and 2000 series that are IP66 rated.
      The items are as follows:
      Cat No. Description
      2031V66 Single switch for vertical mounting - 2000 Series
      2031H66 Single switch for horizontal mounting - 2000 Series
      2032V66 Twin switch for vertical mounting - 2000 Series
      2032H66 Twin switch for horizontal mounting - 2000 Series
      C2031V66 Single switch for vertical mounting - C2000 Classic
      C2031H66 Single switch for horizontal mounting - C2000 Classic
      C2032V66 Twin switch for vertical mounting - C2000 Classic
      C2032H66 Twin switch for horizontal mounting - C2000 Classic
      C2031V66IC Identifi cation kit + cover for C2031V66 - C2000 Classic
      C2031H66IC Identifi cation kit + cover for C2031H66 - C2000 Classic
      C2032V66IC Identifi cation kit + cover for C2032V66 - C2000 Classic
      C2032H66IC Identifi cation kit + cover for C2032H66 - C2000 Classic
      Some of there key features are:
      • 1 or 2 gang weatherproof switch
      • 84 mm apart Mounting centres
      • Switches have been re-designed to provide mechanisms that can be re-orientated horizontally or vertically

      See attached document for the catalogue on these products.

      For furter information please visit https://www.clipsal.com/Trade

       

      Can the analog output of the ATV61 or ATV71 be set up as 0-10 VDC instead of 4-20 mA?

      Issue:
      Can the analog output of the ATV61 or ATV71 be set up as 0-10 VDC instead of 4-20 mA?

      Product Line:
      ATV61 and ATV71

      Environment:
      All

      Cause:
      NA

      Resolution:
      Yes.
      Go to the Input/Output menu (1.5) and set AO1 type to voltage (0-10v range). Set AO1 assignment to the proper setting. The minimum and maxim range can also be adjusted inside the 0-10 V or 4-20  mA ranges.


       

      False Events When Using A SEL 2020/2030 and ION Enterprise

      Goals and Symptoms

      Summary

      SEL 2030 devices are used to communicate with Schweitzer Engineering Laboratories (SEL) relays. The relays only communicate with SEL proprietary protocol. The 2030 can convert this to Modbus for the use of PRODUCTS such as ION Enterprise 5.0.
      We use the name SEL 2030 but this article also applies to other modules in this product family including the SEL 2020 and SEL 2032.

      ION Enterprise 5.0 is configured to translate the Modbus data into the ION network. Within this network a Virtual ION Processor (VIP) can be used to perform logical actions based on the information obtained from the relay.

      One common action is to detect a change in state of a Boolean value. A series of VIP Setpoint modules can be configured to monitor the state of each value.  When the state changes the VIP Setpoint module records an event but can also be used to trigger an action.

      Symptoms

      The VIP Setpoint module shows repeated events without an actual change in the relay state.  This may always appear as an OFF event.

      Causes and Fixes

      Cause

      The ION Enterprise Modbus master repeatedly asks the SEL 2030 for updates.  If the SEL 2030 is providing the data directly from the port which the relay is attached to (as opposed to the port the master is attached to) then the SEL 2030 will randomly reply with Modbus exceptions. These happen when the incoming request happens at the same time as the relay is updating its information in the SEL 2030.

      These Modbus exceptions may cause a VIP Setpoint module to incorrectly register an event.

      Workaround

      There are two ways to work around this problem.

      On newer SEL 2030 devices the master port can be configured to not send exceptions when it is busy. In the port set-up configure the "BUSY_DIS" setting to "Yes" from the default "No"

      On all SEL 2030 devices you can use Memory Move commands to remap the individual relay's data into the memory used by the Modbus master. 

      Attachments

       

      • (Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/dc5af2e8c4694664c125765d001625da/fl_block_5/0.1AF2?OpenElement&FieldElemFormat=gif)

        Original article#10181

        All content © 1992-2007 Schneider Electric


      Legacy KB System (APS) Data: RESL186793 V2.0, Originally authored by KBAdPM on 07/10/2007, Last Edited by DaMi on 10/28/2009
      Related ranges: VIP, ION Enterprise V5.0, Modbus / JBus

      What is the field-installable Kirk Key lnterlock mounting provision for the Powerpact M, P and R frame breakers?

      Product Line:
      Circuit Breakers

      Environment:
      Applies to PowerPact M, P and R

      Resolution:
      For Powerpact M, P and R breakers, the Kirk Key Interlock provision is NOT available for field installation. The provision is only available factory installed on the breaker cover. For an existing breaker, instead of having to replace the breaker, customer can return the breaker/cover via return tags to the plant to have the lock ``provision`` (mounting bracket) installed, based on the below. Then you can buy a Kirk lock from the vendor direct to install on the breaker.

      NOTE:  Return options are below based on type of breaker you have.
       
      PowerPact M:
      Unit Mount           =              Return of Cover Only is acceptable
      I Line                  =              Return of Cover Only is acceptable
       
      PowerPact P:
      Unit Mount           =              Return Complete Breaker with cover
      I Line                  =              Return of Cover Only is acceptable
       
      PowerPact R:
      Unit Mount           =              Return of Cover Only is acceptable
      I Line                  =              Return of Cover Only is acceptable

      For cases where the breaker is in service and the cover cannot be removed, they can take clear pictures showing the serial number, catalog number, and date code, and follow the process in the same way to get a new cover with provision sent to them. Once they remove the original cover and place the new cover on the breaker, they will still need to ship the original cover back to the plant.

       
      If the existing breaker has a padlock attachment, it will have to be removed. The key lock and padlock take up the same position on the breaker cover.

      When returning the Breaker/Cover ask for ``suffix JA (for M or P frame) or  JK (for M, P or R frame)`` for kirk provision. The return TAGs will be for a ``code 50 return and repair``.
      Suffix for ``JR`` for Schneider (Federal Pioneer) provision is no longer available, since about Sept. 2013.

      The lock part numbers are as follows:
      Kirk Single Lock (horizontal mount) KFL003710 ADD 3 INCH ROLL PIN (Square D Drawing # 48186-220-50) For Powerpact M, P & R Breakers Only
      No longer available - Federal Pioneer Single Lock (horizontal mount) VFR-3/8-E (Square D Drawing # 48186-221-50) For Powerpact M, P & R Breakers Only - No longer available.