Unfortunately, we only make a 2 gang version.
The part code is 2000-WE surround cover plate
The cover plate is C2031/45C
Yes the part number is 2031VH-RD
No. Unfortunately, part number 30M35 CANNOT be used in 2031V66.
The part number for the Cooker switch with printing is C2031v45-we for vertical configuration or C2031H45-we for horizontal configuration.
No, unfortunately you will need to buy the parts separately.
No, We do not supply or encourage this as the 2031v66 has a specific gasket set up to ensure weatherproof rating and this may be compromised if tampered with therefore we only sell them assembled.
Unfortunately we dont do the mech as a spare part it is essentually a 30 mech with a rubber seal between the contacts ant the dolly and we dont do that mech as a spare part.
Are there any interchangeable parts between the old XA2 and XB2 lines and the new XB4 and XB5 Harmony products?
Products sold in the United States.
No ....other than a few incandescent light bulbs
CTA-ID : 2033545
No, cooker switches are only available in C2000, 2000 and Saturn series.
The part number for cover to suit P2031VA is - P2001
Electrical Distribution Equipment
It takes 4.5`` of mounting height.
Yes, one off 2031VH + one off 5031NMML
Part no P2031VH will fit on either 449A or 449ASD mounting block
Electrical Distribution Equipment
The trip unit connector is cat. no. S33100. It includes terminal identification markings.
The C2031/45C can be used for a cover it, but it needs to be turned horizontal.
No Medilec permanent connection unit
Use 2031VH with a 38TB Mech.
Yes, The grid plate has a terminal block on the back and is rated at 30A. The part number is 2031VXCB.
Cable option on 9002AW
The 9002AW foot switches do not come prewired nor is there an option for cabling or prewiring.
Refer to the attached Quick Start Annex, document S1B86981.
Yes, as it is based on 30 series mech with 4 terminals it is 2 way compatible.
Some of the key features are:
- 1 gang weatherproof switch
- Standard size gridplate and surround complete with one 30M switch
- Vertical mount
- 116 mm Length x 76 mm Width x 30 mm Depth
- 84 mm apart Mounting centres
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031V66
Unfortunately not, 4061/45 does not have an LED indicator
No, the mech is intergrated into the grid, and cannot be purchased seperately.
The IP66 rated weather proof indoor switches avaliable are 2031V66, C2031V66.
The part number is P2031VA.
No unfortunately we only go up to 2 gang (C2032V66)
Part numbers are P2031VH (single) P2032VH (double) P30M (Mech)
4061D32 and 4061/45 cooker switches are supplied with a spare labeled mechanism cap that is marked COOKER to replace the unmarked cap. Picture attached.
Thus the customer has the choice to use 4061D32 and 4061/45 either marked COOKER or unmarked.
The coil codes available for the U-Line Motor Starter control units are as follows:
24VDC is BL
24VAC is B
48-72V DC or 48V AC is ES
110-240V AC/DC is FU.
We do not have 480VAC coils available
CTA-ID : 2031577
The sealed VA is the current draw when the coil is energized after the contacts have closed. This is the stable condition which uses the least
current, as opposed to inrush VA, where changing contact state requires high current for a brief period.
CTA-ID : 2051975
Yes it does, they are supplied with the part.
Will the LA4DC1U work on the CAd32BD relay
IEC relays and accessories
Products sold and used in the United States
Identifying product compatibility
The CAD32BD with DC coil has built-in coil suppression protection as standard so the LA4DC1U is not needed.
CTA-ID : 2031917
What are the torque specifications for AB1VV435U and AB1VVN1035U terminal blocks?
IEC Terminal Blocks
AB1VV Box Lug Blocks
The torque specification for the AB1VV435U is .5-.7 N-m(4.4-6.2 inch-lbs). and for the AB1VVN1035U, it is 2-2.5 N-m (17.6-22 inch-lbs).
CTA-ID : 2043140
Is Ethernet communication available on ATS48 or ATS22 solid state softstarts?
Yes, via the TSXETG100 or TSX100SD (it has High temperature range 70 deg C) Ethernet bridge. Please be aware that you cannot do I/O scanning on the ATS48 or the ATS22 softstarter.
CTA-ID : 2051085
What type of fuse does RM17TE00 except?
Zelio Relays and Timers
Correct fuse is a 1 A fast acting CC or gG fuse on the input. There was a error in the instructions.
CTA-ID : 2061041
For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds. There is a linear relationship from A to E setpoints.
For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage. There is a linear relationship from A to E setpoints.
CTA-ID : 2061385