Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm
Yes, it is a 30M mech and can be two way wired
C2025XC - available in White (WE), Brushed Aluminium (BA), Chrome (CH) and Gold (GD).
No it can not - we recommend fitting the 30USBCM to the Saturn communication wall plates eg 4031VH
Part no 2025XAN can be used the USB has to mount vertically to enable it to fit
Red is not a standard colour for this part but it can be made as a special
No , We have sinlge outlets with USB chargers or you can fit 1 x USB charger mech to either a 2025XA or a C2025XA ( in vertical configuration )
For further information on this please visit the clipsal web site on the link provided
** - colour of the cover plate Eg: WE, BA
No you can not. You can only fit 60 series mechanisms in the 4025XA.
Yes, the 2025VXA does come with shutters.
2025VXA White is the only commercilaized colour in NZ.
Any 30 series mech WILL NOT fit into part number 4025XA. They are designed to accommodate 60R mechs only.
Unfortunately not, we do not have a bell press / momentary mechanism that can fit on the extra mechanism spot of 4025XA.
No it is not suitable for the Saturn power point 4025XA. However the USB mechanism 30USBCM will fit on 403*VH saturn communication plates.
* - 1,2,3,
Although not recommended but yes it can be done. When doing this make sure all wiring is complete before inserting USB mechanism in place due to the fact that you will not be able to access the Active terminal.
Also this cannot be used with a standard wall plate it is recommended to use a 154 c clip to install as the wall plate hits the top of the mechanism.
The part name is 2025XAPID-WE
No. 30USBCM will only fit on plates that can accept 30 series mechanisms. Eg : 4031VH-WE
The part number for the cover plate for the C2025XA is C2025XC,
followed by the coulor requested see table below:
Note this table is only a guideline and may vary over time.
Some key feautures are:
- Standard size
- Identification cover
- For twin switched socket
- With extra switch
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2025XC
Yes, 60R32 or 60R32COOK - 32A , mech. Do not have a double pole version.
No. Need to use the 30USBCM on the 403*VH plates
No you cannot, the 4025XA is designed to fit a 60R16 or a 60R32.
The part number for cover to suit 4025XA is 4025XAC.
No, Unfortunately there is no USB mech suitable for 4025XA. There is only the one USB Mech avaliable and the part number is 30USBCM
Its key features are:
- 30 Series USB Charger Mech suits most Clipsal Switch Plate styles and colours, including Clipsal 2000 Series™, C2000™, Saturn™ Data, Slimline® and Standard.
- Fit up to three USB Charger Mechs per plate.
- Available as a single mech or in a variety of pre-assembled Clipsal Wall Plate combinations.
- Match coloured plates with compatible colour caps, to suit decor or identify type of power in a commercial environment.
- Able to be retrofitted, quickly, into Clipsal Wall Plates with 30 Mech apertures.
- Able to reduce overall system load and infrastructure by replacing standard GPOs with 30 Series USBs.
- Meets five-star energy ratings for efficiency with extremely low standby power (< 0.07W).
- Cable compensation allows devices to be charged quickly (compliant with USB Charging Specification BC1.2).
- Inbuilt protection for surge, over-temperature and over-current occurences.
For more information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCM
60R32 depending on the colour of the mechanism will suit 4025XA, 4025XUA in the saturn range and Z4025XA, Z4025XUA in the Saturn Zen range. It will not fit into any other switch plates in the Saturn or Saturn Zen range.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60R32
The part number to suit is a - 60R32 or 60R32COOK
The part number for the 32amp mech to suit Saturn 4025XA is the part number - 60R32.
The part number for a slimline double GPO with an extra , removable , switch mech is - SC2025XA
But because Slimline is no longer available Iconic 3025XA (PDL395X) is the next slimest option, or Classic C2025XA if you prefer the Slimline look.
No, you need to have 150mm of seperation between services. Therefore you will need to have the data outlet on a seperate plate 150mm from the closest power point.
The part you will require is the 4031VH, which is the saturn communication plate.
Some of the key features are:
- Accepts 30 series mechanisms (Including DATA/COMMS, 30PB and 30PBL)
- Less mechanism
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4031VH