sock swt auto sing 15a shutt

Socket Switched Auto Switched Single 15A With Safety Shutter

Catalogue Number: 2010/15S
sock swt auto sing 15a shutt
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart

Specifications

hide show
Range of product
Series 2000
Product brand
Clipsal
Quantity per set
set of 1
Protection type
fingersafe
Local signalling
without light indicator
[In] rated current
15 A
[Ue] rated operational voltage
250 V AC
Depth
31 mm
Length
116 mm
Width
76 mm
Fixing center
84 mm
Standards
  • AS/NZS 3112
  • AS 3100
  • AS 3109
  • AS/NZS 3122:approval number S/1
    • Sustainable offer status
      Green Premium product
      REACh Regulation
      Free of Substances of Very High Concern above the threshold
      REACh free of SVHC
      Yes
      EU RoHS Directive
      Compliant
      Toxic heavy metal free
      Yes
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)
      Environmental Disclosure
      ENVPEP111024EN
      Circularity Profile
      ENVEOLI110713EN

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Installation Instruction

      • Product Environmental

      • Operating Manuals

      • Specifications

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      What is the part number of an autoswitched 250V 15A single switched power outlet?

      2010/15 and 10D15S are autoswitched 250V 15A single switched power outlet. For further information, please visit

      2010/15
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=2010/15 


      10D15S
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=10D15S

      In the 600 Series, is the 691/15 available in RED

      Not available, but Clipsal 2015/15 is available in red but it's horizontal.

      What is part number for cover to suit C2015/15?

      Part number for cover to suit is C2015C.

      for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2015C


      User-added image

      What are the part number for a 15 amp outlet with RCD protection?

      Not available as 1 unit. Would have to use 2015/15 with 2031VRCD30
      For further information , visit links below:-
      https://www.clipsal.com/Trade/search-results?q=2015/15
      https://www.clipsal.com/Trade/search-results?q=2031VRCD30
      User-added image
      User-added image

      What is the part number for a replacement for 15/15/EL30?

      There is no direct replacement for this unit. Customer would be able to use 3 items to make this up - 2015/15 , 2031RC30 & 2000H2

      For further information , visit links below:-
      https://www.clipsal.com/Trade/search-results?q=2015/15
      https://www.clipsal.com/Trade/search-results?q=2031RC30
      https://www.clipsal.com/Trade/search-results?q=2000H2
      User-added image

      User-added image
      User-added image

      What is the part number for a single switched socket, 15A with extra switch?

      C2015/15X is the part number for a single switched socket, 15A with the extra switch.
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=C2015/15X

       

      Does Clipsal have a 15 amp GPO with an extra switch?

      Yes, we have the C2015/15X from the Classic range.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/search-results?q=c2015/15X

      Is there a double pole 15A outlet?

      Yes, the part number is a 2015D15

      What is part no for 15amp vertical single GPO

      PART NO 2015V15

      What is the material of the cover for a 9013GHG2 made of?

      Product Line:
      Pumptrol pressure switches, Class 9013

      Resolution:
      Noryl SE-1X is used on 9013G devices for the cover, and on 9013F products with 3R rating.


      CTA-ID : 2010510

      Is there a 15A Surge protected outlet?


      To obtain a surge protected 15A outlet you will need to purchase a C2015/15X and a 30SFM and replace the extra switch in the outlet with the 30SFM surge protector mechanism and then wire accordingly.
      For some reason we have given the 30CSFM a 10A rating. The mechanism only needs to be rated for the correct voltage and correct fault current the amperage rating is irrelevant as this device does not have the load passing through it, it is there merely for fault conditions.

      Why is the drive not responding to the 4-20mA feedback signal when the Pump Switching Card is installed?

      Most common issue is Parameter o19 must be set to the maximum pressure of the sensor in Bars.  Parameter o20 is set to the PI setpoint in Bars.

      To get the pressure in Bars, divide the pressure in PSI by 14.504.


      CTA-ID : 2015151

      What is the replacement part number for the SCR module for ATS23C15N or ATS23C24N?

      Issue:   What is the replacement part number for the SCR module for ATS23C15N or ATS23C24N?
       
      Product Line:   ATS23
       
      Environment:  ATS23C15N ATS23C24N
       
      Cause:   N/A
       
      Resolution:   No parts available replace starter



       

      What is the part number for the Cooling Fan for the ATS46 softstarter


      Issue:Cooling Fan part number
      Environment: Replacement parts
      Cause: Cooling fan failure.
      Resolution: See attached document for heat sink cooling fan part numbers.

      Are Masterpact NW and NT circuit breakers 100% Rated?

      Issue:
      Are Masterpact circuit breakers 100% Rated?

      Product Line:
      Masterpact NT and NW

      Environment:
      NEMA influenced markets only

      Resolution:
      All UL 489 listed Masterpact NT and NW circuit breakers are 100% rated.
      Note that standard 80% vs. 100% rating applies to breakers listed per UL 489 only.
       

      Why does the ATV28 unit not output the proper voltage when trying to test drive unloaded?

      Issue:   Why does the ATV28 unit not output the proper voltage when trying to test drive unloaded?
       
      Product Line:   ATV28
       
      Environment:  All
       
      Cause:   Outoput voltage
       
      Resolution:   
      You can not test this drive with no motor connected to the output terminals because it is a current driven device.

      Would not expect to see appropriate values corresponding up to rated line voltage at high speed because of design of unit, regardless of what torque type have unit set for in Uft menu.


       

      How do I assign Reference Switching to a Logic input in the ATV28?

      Issue:   How do I assign Reference Switching to a Logic input in the ATV28?
       
      Product Line:   ATV28
       
      Environment:  All
       
      Cause:   N/A
       
      Resolution:   
      From factory I/O settings it will be necessary to set the LI4 then LI3 inputs to some setting that is compatible with Reference Switching. Preset speeds are incompatible with Reference Switching. LI4 must be changed before LI3. If not using LI3 or LI4 set them to NO.

      In the I-O menu change the desired logic input to rFC. It will be in Auto and use AI2 or AIC for speed reference when the contact is open. The drive will be in Hand mode and use AI1 for speed signal when there is 24 VDC on the rFC input.


       

      What is the coil consumption or burden for the Tesys LC*D** contactors?

      * 1 or 2
      ** 09 through 38

      Issue:
      Coil consumption or burden for the Tesys LC1D/2D contactors from 9A - 38A

      Product Line: 
      Contactors and Starters - IEC

      Environment:
      North American Products

      Resolution:
      All AC coils for the LC1D09 through LC1D38 3-pole contactors ( including ring tongue, quick connect and spring terminal versions ) have an inrush of 70 volt-amps for either 50 or 60 Hertz applications, and a sealed value of 7 volt-amps for 50Hertz applications or 7.5 volt-amps for 60 Hertz applications.

      What are the Square D part numbers for the fans used internal to the ATV66D33N4U?

      Issue:
      What are the Square D part numbers for the fans used internal to the  ATV66D33N4U?
       
      Product Line:
      ATV66
       
      Environment:
      Fans
       
      Cause:
      n/a 

      Resolution:
      Each of these drives have the VZ3V665 heat sink fan which is the larger fan located in the bottom of the unit. The NMB part number for this fan is 5915PC-23T-B30.
      Each of these drives have the VZ3V6654 power board stirring fan which is a small fan located in the upper left side of the unit.
      Only the ATV66D54N4U, ATV66D64N4U, ATV66D79N4U and ATV66D46M2U drives also have a VZ3V6655 capacitor bank fan located above the power terminal block.

      These drives are the Frame Size 4 and Frame Size 5 ATV66.

      The part numbers are listed on page 98 (page 104 in Adobe Acrobat) of the VD0C06S304E Receiving, Installation and Sart Up manual in Appendix A - Spare parts list.  The part # for the fans of the other size units is also listed in this table.