Quantcast

Round Identification Cap

White Electric | Round Identification Cap

Round Identification Cap

Item Number: 2009R-WE

Retail
$2.17
RRP (Inc. GST)

Fitting into the 2000 Series surround the round identification cap is easy to stamp, or to have customised. The cap can be pushed into place in the surround so you can see at a glance which switch or circuit you are working with.

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-
Identification Cover

Features

  • Green Premium Product
  • Adaptable, low-cost circuit ID caps
  • Compatible with 2000 Series grids and surrounds
  • Can remain visible (2009R) or non-visible (2009)
  • Supplied blank as standard, but are also available to special order with specific identification information
  • Located in a 2000 Series grid mounting screw hole

Specifications

Design

Range of product

Series 2000

Product brand

Clipsal

Device application

circuit identification

Sustainable offer status

Green Premium product

Physical

Depth

8 mm

REACh Regulation

Free of Substances of Very High Concern above the threshold

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure

ENVPEP120506EN

Others

Diameter

12 mm

Package 1 Weight

0.001 kg
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

Frequently Asked Questions

hide show

What is the Clipsal 5470

This is a keyless entry system that Clipsal used to sell until approximately 2009. The key cards used for this are no longer available but work off of 134.2KHz frequency.

This was a product was supplied to Clipsal by Axeze. 

https://www.axeze.com.au/products/readers/keyless-entry

Support for APC Omnipass and APC Biometric Devices has been discontinued

Issue:

Support for APC Biometric Devices.

Product Line:

BIOPOD, BIOCNB40. BIOM34, BIOSLIDE

Environment:

N/A

Cause:

Product Line Discontinued.

Resolution:

As of January 1st, 2009 APC made a decision to discontinue it's Biometric Product Line. Technical Support for Biometrics was provided for 1.5yr following the Discontinuation of this product line, however effective June 1st, 2010, APC will no longer be supporting Omnipass for APC Biometric Devices.

 

For Updated versions of Omnipass, please visit Softex Inc. https://www.softexinc.com
 

What is one way to tell if a drive or Softstarter is still under Standard warranty?

Issue:
Standard warranty for a Drive or Softstarter.
 
Product Line:
Altistart, Altivar

Environment:
All
 
Cause:
NA
 
Resolution:
The date of purchase indicated on the distributors invoice or receipt can be used to determine if the drive or a Softstarter is in warranty. The standard warranty is 18 months.  If no receipt or invoice is available, the date code of the drive can be used to determine if the drive is in warranty.  This date code is imbedded into the Serial number that is located on the right side label of the unit below the bar code. The first 2 digits indicate the manufacturing plant.  The next two digits indicate the last two numbers of the year it was manufactured and the next two digits indicate the week of that year.  The following numbers indicate the sequence of drive. 
 example:  8B 092124041 (8B = manufacturing location, 09 = year 2009, 21 = week).  The warranty ends November of 2010 (18 months from May 2009).
 

Is my 6600A part of the product from the recall circa 2002?

Both Schneider Electric and Gerard Corporation make a bathroom unit called the 6600A.
This was a recall by Chief Kitchenware which was/is a part of the Gerard Corporation.
Clipsal and Schneider Electric have no responsibilities to this recall.

For further information please see the link below.
https://www.recalls.gov.au/content/index.phtml/itemId/954606



 

Are the circuit breakers used in the Powerpact 4 panelboards adjustable.

The circuit breakers currently used in the Powerpact 4 panelboards have either adjustable or  fixed settings, see list below for further information.


Single pole
Single pole circuit breakers have fixed settings

Two pole
Two pole circuit breakers have fixed settings

Three or Four pole up to 160A*
Three or four pole circuit breakers up to 160A have adjustable thermal overload settings (Ir) adjustable between 70 - 100% of their nominal rating (In)

Three or Four pole 200 & 250A*
Three or four pole circuit breakers rated at 200 & 250A have adjustable thermal overload settings (Ir) adjustable between 70 - 100% of their nominal rating (In) and adjustable magnetic settings adjustable between 5 to 10 x In.

Three or four pole 400 to 630A
These circuit breakers are fitted with electronic trip units and have adjustable overload settings between 40 - 100% of their nominal rating (In) and adjustable short circuit settings adjustable between 1.5 - 10 of the resultant overload setting.

Three or four pole 800 to 1600A
These circuit breakers are fitted with electronic trip units and have adjustable overload settings between 40 - 100% of their nominal rating (In) and adjustable short circuit settings adjustable between 1.5 - 10 of the resultant overload setting. They also have adjustable time delays for overload and short circuits.


Note:
* The current range of MGP... thermal magnetic circuit breakers are based on the NSX MCCB. MGP..... circuit breakers produced before around the middle of 2009 were based on the NS range of MCCB's which had adjustable thermal overload settings of 80 - 100% of their nominal rating (In). 

When did the ATV28 drive become obsolete?

Issue:
ATV28 obsolescence.

Product line:
ATV28, Altivar 28

Environment:
All models.

Cause:
Determine age of unit, product obsolescence

Resolution:
ATV28 became obsolete in October of 2004.  The current replacement is the ATV312.  There are some differences that should be reviewed by the customer such as wiring, dimensions and ratings.
Show More
Office

Range

The contemporary styling and flexibility of the 2000 Series and C2000 range have made it Clipsal’s most popular range of switches and power points.

2000 Series and C2000 range offers a range of stylish switches in standard and architrave sizes. Power points are available in single, double and automatic models, in vertical or horizontal format, with options such as neons, extra switches and safety shutters. The extensive product range also includes dimmers, fan speed controllers, timers, weatherproof switches and TV, data and phone sockets.