FLANGE MTG CURVED SURFACE
flange mtg curved surface
FLANGE MTG CURVED SURFACE
flange mtg curved surface

Mounting Flange, Horizontal Mount, For 300mm Diameter Surface

Catalogue Number: 2000MF300
FLANGE MTG CURVED SURFACE
flange mtg curved surface
FLANGE MTG CURVED SURFACE
flange mtg curved surface
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart

Specifications

hide show
Range of product
Series 2000
Product brand
Clipsal
Product or component type
flange mounting kit
Shape
rectangular
Fixing center
84 mm
Depth
18 mm
Length
119 mm
Width
78 mm
Sustainable offer status
Green Premium product
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
ENVPEP121018EN
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • Operating Manuals

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Do you have a 2000MF round mounting block with a diameter of 800?

Yes the part number is 2000MF800.

Can you use a 2449ASD with a 2000MFV800?

Yes, they can be used together but you may need longer screws.

Series 2000-4000 Portable Circuit Monitor Clamp on Current Transformer Dimensions

Product Line
CM2000

Environment
Documentation

Resolution
See attached drawing document.

What is the part number for a mounting block that can be mounted on a circular 300mm pole?

The part number for a mounting block that can be mounted on a circular 300mm pole is - 2000MF300
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=2000MF300

User-added image

Is it possible to mount a weathershield power point on a pole ?

Weather shield enclosure will line up with the 2000MF range, screw mountings will go on an angle to the pole, opposing the enclosure and may be tricky.
Available standard as white. If diameter surface is less than 300mm you may be able to use a 56PMK.
2000MFV range has a large amount of variable for different sized diameter surfaces.
Please see following link for complete range of sizes
https://www.clipsal.com/Trade/search-results?q=2000mf
 

Is DDE Included With SMS-3000/1500?

Product Line
System Management Software 3000/1500

Environment
DDE Server

Resolution
DDE is included in the SMS-3000/1500 software package.

What is the part number for the Brushed Aluminium surround in the 2000 series?

The part number is 2000M-BA.

Lever arm selection for L100/L300

Issue:
How does one pick out a lever arm for an L100/L300 limit switch?

Product Line:
Type A roller arms for L100/L300 limit switches

Environment:
US Product

Cause:
L100/L300 product selection is different than other limit switches

Resolution:
For an arm with a 0.25" wide, 0.75" diameter steel wheel, pick based on length:

AC - 1.25"
AA - 1.50"
AD - 1.75"
AH - 2.00"
AJ - 2.25"
AO - 2.50"
AK - 2.75"
AB - 3.00"
AL - 3.50"
AM - 4.00"
AN - 4.50"
AP - 5.00"
AQ - 5.50"
AR - 6.00"


To modify the roller, use the following suffix(es):

1 - 1" diameter roller
4 - 1.25" diameter roller
2 - 1.50" diameter roller
N - Nylon roller
R - Ball bearing roller (0.75" diameter)
NS - Stainless steel roller pin, nylon roller

What edition of SQL Server 2000 is installed with System Manager Software (SMS) Professional Edition (PE) 4.0?

The SQL Server 2000 edition is operating system dependant:
Windows XP Professional installs SQL2K_Personal edition
Windows 2000/2003 Server installs SQL2K_Standard edition


Legacy KB System (APS) Data: RESL201502 V1.0, Originally authored by MaTh on 03/02/2010, Last Edited by MaTh on 03/02/2010
Related ranges: System Manager 4.0

What is the minimum firmware version required on a Series 3000/4000 Circuit Monitor that enables it to access the features available in the ECC21 firmware version 5.0?

Product Line
Series 3000 Circuit Monitor
Series 4000 Circuit Monitor
ECC21

Resolution
The Series 3000/4000 Circuit Monitor must have firmware version 12.81 or greater in order to enable it to access the features of the ECC21 firmware version 5.0.

Altitude derating

Altitude does not significantly affect circuit breaker characteristics up to 2000m.
Above this altitude, it is necessary to take into account the decrease in the dielectric strength and cooling capacity of air.
The following table gives the corrections to be applied for altitudes above 2000 meters.the breaking capacities remain unchanged.


Legacy KB System (APS) Data: RESL204881 V1.0, Originally authored by PiDe on 03/22/2011, Last Edited by PiDe on 03/22/2011
Related ranges: EasyPact

What is the part number for a blank legend plate for the 9001K products with 3 lines of engraving space?

Issue: 
What is the part number for a blank legend plate for the 9001K products with 3 lines of engraving space?

Product Line: 
Pushbutton accessories

Enviroment: 
9001 Pushbuttons

Cause: 
Product selection

Resolution: 
The 9001KN300 is a 30 mm, blank legend plate for 9001K, KX, and SK product lines.

Lox L100/L300 rod type lever arm

Issue:
What is the part number for a rod type lever arm for a L100 or L300 limit switch?

Product Line:
L100/L300 RB Denison Lox Switches

Environment:
US Product

Cause:
There is no part number listed in the Digest for this

Resolution:
The part number is simply R.  The R rod holder accepts round rods with a diameter of 0.187"

 

'Advantys Configuration Software version 2.5 returns 'Error 35603' when trying to open an older application

Goals and Symptoms

'Advantys Configuration Software version 2.5 returns 'Error 35603' when trying to open an application
that was created with 'Advantys Configuration Software version 2.2'.

Facts and Changes

Advantys Configuration Software version 2.5

Causes and Fixes

'Advantys Configuration Software version 2.5 returns 'Error 35603' when trying to open an application
that was created with 'Advantys Configuration Software version 2.2'.

The problem only happens on a PC that is running the French language version of the 'Microsoft
Windows 2000' operating system.



We expect a patch to be available for fixing this problem sometime near the end of Q1/07.


Legacy KB System (APS) Data: RESL181738 V1.0, Originally authored by on , Last Edited by AlCh on 01/26/2007
Related ranges: Advantys STB

How to enable and disable EN50160 functionality via System Manager Software (SMS) on a Circuit Monitor 3000/4000 (CM4000/CM3000) or Power Meter 800 (PM800)

Issue
Enabling and Disabling EN50160 functionality via System Manager Software (SMS) 

Product Line
CM3000
CM4000
PM800

Environment
SMS

Cause
Enabling and Disabling EN50160 functionality

Resolution
In the SMS Setup Utility, go to Setup->Device/Routing and double-click on the CM3/CM4/PM8 meter. Under the "Basic Setup" tab click on the "Advanced" button. On the "EN50160" tab check the "Enable EN50160 Evaluation" box to enable EN50160.
EN50160 alarms cannot be enabled under "Onboard Alarms/Events" tab until "enable EN50160" is checked.

EN50160 alarms cannot be disabled under "Onboard Alarms/Events" tab until "enable EN50160" is unchecked.

Why does the Series 3000/4000 Circuit Monitor display show stars or asterisks for frequency?

Issue
Why does the Series 3000/4000 Circuit Monitor display show stars or asterisks for frequency?

Product Line
CM3000 and CM4000 series meter

Cause
Customer see stars or asterisks for frequency on CM3000 or CM4000 front display.

Environment
Reading Frequency from front display on CM3000 or CM4000 meter. 

Resolution
There are several possibilities in which this could occur:

  1. The frequency is changing too quickly. (Possible causes could be when monitoring a Generator that has not stabilized the voltage frequency)
  2. The voltage on phase A and C has dropped to zero. (Normal)
  3. (CM4000 series only) The Current Voltage Module (CVM) module is not properly seated. (NOTE: In this instance cycling control power to the meter will not help.)
  4. (CM4250 Only) This symptom can also be caused by the temperature chip in the meter when the firmware version is earlier than 14.4. To confirm this is the issue read register 3238. If the value is zero, then this may not be the issue. It is recommend that the firmware be upgraded to the latest version available.
  5. If none of these solutions work then use the attached flow chart to validate the issue and contact the appropriate group per the PDF attachment.

Is it possible to have a negative Voltage Unbalance reading from a circuit monitor or a power meter?

No, it is not possible to have negative Voltage Unbalance reading from a Series 800 Power Meter or a Series 3000/4000 Circuit Monitor. All voltage unbalance readings will be an absolute value expressed as a percentage of unbalance. Voltage Unbalance is calculated using the following formula: Vunbalance = [(Vavg-Vphase) divided by Vavg].
It is possible, however, to have negative Voltage Unbalance readings if the device is a Series 600 Power Meter or a Series 2000 Circuit Monitor. These devices express Voltage Unbalance as a positive or negative percentage.

In general the absoute value of any Voltage Unbalance larger than 2.5 can cause heating in motors.



Version: Series 600 Power Meter
Series 800 Power Meter
Series 2000 Circuit Monitor
Series 3000 Circuit Monitor
Series 4000Circuit Monitor

© Schneider Electric 2005
Original article#1078


Legacy KB System (APS) Data: RESL182108 V1.0, Originally authored by DaMi on 02/13/2007, Last Edited by DaMi on 02/13/2007
Related ranges: ION Other

Galaxy 5000; Modbus Q1 Input Breaker status does not change state

Issue:
Modbus Q1 Input Breaker status does not change state

Product line:
NAM Galaxy 5000


Environment:
NAM Galaxy 5000


Cause:
Modbus Q1 Input Breaker status does not change state

Resolution:
The 66061 JBUS/Modbus manual was updated May 2018 to reflect the correct Modbus register for NAM Galaxy 5000 Q1 Breaker status.  The Q1 Modbus register is only monitored on EMEA Galaxy 5000/5500 UPSs.  For NAM Galaxy 5000 customer must monitor KA1 for Q1 Breaker status change.  EMEA UPSs can monitor the KA1 status as well but KA1 is optional on EMEA UPSs.
From the 66061- JBUS/Modbus manual
 
Status message   Status to 0 Status to 1 JBUS Word Bit
Mains 1 input switch (Q1) in EMEA closed open 44 3
Mains 1 backfeed (KA1 optional) closed open 44 6
Converted to Modbus
Status message   Status to 0 Status to 1 Modbus Bit
Mains 1 input switch (Q1) in EMEA closed open 69 3
Mains 1 backfeed (KA1 optional) closed open 69 6
 


 

Video: How to change the accumulated energy in CM4000/CM3000/PM800 series meters from absolute to signed?

Issue
The circuit monitor 3000/4000 series and the Power meter 800 series can accumulate the energy values in one of two modes: signed or absolute.
In signed mode, the meter considers the direction of power flow, allowing the magnitude of accumulated energy to increase and decrease.
In absolute mode, the meter accumulates energy as a positive value, regardless of the direction of power flow. In other words, the energy value increases, even during reverse power flow.
In signed mode, the meter will effectively subtract power that is flowing in the reverse direction from the power that is flowing, or has flowed, in the positive direction resulting in a net power usage.

The default accumulation mode is absolute.
 
Product Line
CM3000 series
CM4000 series
PM800 series
 
Environment
Energy readings 

Resolution
To change mode from absolute to signed using front panel, view the following video and the following steps:



Enter the Read/Write menu from the display: From the meter main menu, scroll right to diagnostics, then navigate to read/write registers. It will ask you for your meter password.
If the password is default, press the up arrow button to select 0 and press enter. If password is not default, enter meter's password.
In the read write regs screen press up/down button to go to your desired register. If you keep the arrow button pressed it will start to scroll through registers faster.
To write a value to a register, hit enter when you reach the register and change the value.

1. Write 9020 to register 8000, this places the meter in setup mode.

2. Write 1 to register 3232

3. Write 1 to register 8001, this saves the changes.

4. Write 9021 to register 8000, this exits setup mode and that will initiates a soft reset on the meter.


To change the mode using ION setup, follow these steps or the video below.
1. Connect the meter in ION setup. In Setup mode, Double click the energy and demand option.


2. Change the accumulated energy from absolute to signed and send it to the meter.

How does the Command Code 1120 work on the Series 3000/4000 Circuit Monitor?

Issue
The way that the 1120 command works changed in firmware version 10.204.

Product Line
CM3000
CM4000

Environment
Register Commands

Cause
The 1120 command in the CM4000 has historically cleared all memory. This command would clear all configuration registers including basic setup and communications parameters. The command would also clear all data log and alarm setup and all data log data.

This command has been modified and now requires the use of a parameter with the command to clear selected segments of the meter or to clear everything like the original command. This new command is implemented in the CM4000 in firmware versions beginning with 10.204. The following table provides a list of the parameters to clear selected segments of the meters memory.

Resolution
To issue commands using the command interface, follow these general steps:

  1. Write the related parameter(s) to the command parameter registers 8001 through 8015.
  2. Write the command code to the command interface register 8000.
Command Parameters Notes
1120 (8001) Bitmap of systems to reset Restart System – Hard Reset with Memory Clear
Bitmap of systems to reset:
Bit 00 = Utility Registers
Bit 01 = Reserved
Bit 02 = CMPL
Bit 03 = Config Display
Bit 04 = Commands
Bit 05 = Files
Bit 06 = Alarms
Bit 07 = I/O Points
Bit 08 = Config Meter
Bit 09 = Administrative Ctl
Parameter value of 9999 causes meter to reset all registers to meter defaults and format the disk-on-chip.
 
Parameter Description
Bit 00 = Utility Registers Clear all utility register (15,800 - 15,999).
Bit 01 = Reserved  
Bit 02 = CMPL  Clears all custom Programs created in the meter.
Bit 03 = Config Display  Clears all custom Displays created in the meter.
Bit 04 = Commands  Clears all command interface registers.
Bit 05 = Files  Clears all data log files (data and configuration).
Bit 06 = Alarms Clears all alarm configuration parameters.
Bit 07 = I/O Points Clears all I/O point configuration and assignments.
Bit 08 = Config Meter  Clears all metering setup including PT and CT ratios.
Bit 09 = Administrative Ctl Clears all user account created in the meter.
9999 = Clear All Clears all memory in the meter (including comms).

*NOTE: The 1120 command is disabled when revenue security is active.
*Reference CM3000 Register List Commands Page (Page 314).
*Reference CM4000 Register List Commands Page (Page 359).

M340 Troubleshooting Guide

Goals and Symptoms

How to interpret the front panel lights when diagnosing problems with the M340.

Causes and Fixes

Modicon M340 Processor Troubleshooting


  • The Modicon M340 Programmable Automation Controller is a Mid-range automation system providing small size, yet powerful 32-bit processor for demanding OEM machine and industrial process applications. It is programmed using our cross-platform IEC 61131-3 application development software, Unity Pro (v3.0 or higher). The front panel has a series of LEDs that indicate the status of the M340 processor, SD Memory Card, and system communications.

    The Modicon M340 is available in the following models.

     

    M340 Processors


    BMXP341000 Standard Level 1, 2MB RAM, USB port,

              • 1-communication port: ModBus/Serial, includes 8MB memory card
    BMXP342000 Advanced Level 2 (Performance) for Modicon M340 PLC
          • 1 USB Port for programming
            1 slot for a memory SD-card
            1 communication port: serial link
            Shipped with 1 standard memory SD-card

    BMXP342010 Advanced Level 2, 4MB RAM, USB port,
              • 2-communication ports: ModBus/Serial and CANopen master includes 8MB memory card.

    BMXP342020 Advanced Level 2, 4MB RAM, USB port,
              • 2-communication ports: ModBus/Serial and Ethernet-ModBus/TCP, includes 8MB memory card

    BMXP342030 Advanced Level 2, 4MB RAM, USB port,
              • 2-communication ports: Ethernet-ModBus/TCP and CANopen master includes 8MB memory card.
     

    Processor Status Displays

    Introduction

    There are several LEDs available on the front panel of each processor, enabling
    rapid diagnosis of the PLC status.

    These LEDs provide information on:


    · PLC functional status
    · The memory card status
    · Communication with the I/O modules
    · Modbus Serial communication
    · Communication on the CANopen network
    · Communication on the Ethernet network

    Illustration

    The following diagrams shows the physical location of the LEDs on the front panel of the BMX P34 processors:

    BMX P34 1000/2000 Processors LEDs

        •  
    BMX P34 2020, BMX 2030/20302 Processors

    Table 1 M340 Processor Status and Error indicator display



     

    Display differences between version 1 and version 2 of the

    BMX P34 20x0x module.



    Searching for Errors Using the Processor Status LEDs

    General

    The status LEDs located on the processor inform the user of the PLCs operating
    mode and any possible errors.
    The errors detected by the PLC concern:

    · circuits which constitute the PLC and/or its modules: internal errors
    · the process driven by the PLC or the process wiring: external errors
    · functioning of the application executed by the PLC: internal or external errors

     

    Error Detection

    Error detection is performed at startup (autotest) or during operation (which is the
    case for most equipment errors), during exchanges with the modules, or during
    execution of a program instruction.
    Certain "serious" errors require the PLC to be restarted while others are left to the
    user to decide how to proceed depending on the level of application required.
    There are three types of error:

    · non-blocking
    · blocking
    · processor or system

    Blocking Errors

    General

    Blocking errors, caused by the application program, do not cause system errors but
    prohibit execution of the program. When such an error occurs, the PLC stops
    immediately and goes into HALT mode (all tasks are stopped on the current
    instruction). The ERR LED flashes.

    Restarting of the Application After a Blocking Error
    To end this status it is necessary to init the PLC or to set the %S0 bit to 1.
    The application is then in an initial state:
    · The data resumes its initial value.
    · Tasks are stopped at end of cycle.
    · The input image is refreshed.
    · Outputs are controlled in fallback position.
    ·
    The RUN command then allows the application to be restarted.

    Blocking Error Diagnosis
    Indication of a blocking error is signaled by the ERR and RUN LEDs flashing on the
    processor front panel.
    The system words %SW126 and %SW127 indicate the address of the instruction
    which caused the blocking error.
    The nature of the error is indicated by the system word %SW125.
    The following table presents the errors signaled by the values of the system word
    %SW125.
     

    M340 Diagnostic information Memory card

    Memory Card Description

    Only Schneider memory cards are compatible with BMX P34 processors.
    Schneider memory cards use Flash technology and do not require a battery. These
    cards can support about 100,000 write/delete cycles (typical).

    The Memory card access LED is located behind the Memory Card Protective Cover.

     


    CANopen Diagnostics

     

    BMX NOM 0200 Module Status Display

    LED Indications


     

    BMX NOE 01x0 Module


    Ethernet LED






    Display differences between Version 1 and version 2 of the BMX NOE 01x0 module.



     


Legacy KB System (APS) Data: RESL200598 V1.0, Originally authored by MiOB on 11/26/2009, Last Edited by MiOB on 11/26/2009
Related ranges: Modicon M340.

ION Setup Revision History and Features & Fixes

Issue
The ION Setup revision history may be required.

Product Line
ION Setup

Environment
ION Setup

Resolution
Please see the table below for the revision history. 
To obtain the latest version of ION Setup software, refer to article FA212816 - Where can I download the latest version of ION Setup Software?
 
Release Date Version File Name Bug Fixes New Features
6/21/2013 ION 3.0 Build 13172 IONSETUP30_B13172_01.EXE
- CM3/CM4 Alarm log programming to a depth of 0
- PM53xx Meter Resets and other various setup problems with Ashoka devices
- Removal of PM5560 Remapping setup
- Bug fix for Harmonics/Phasor Viewer Real-Time display
- Communication statistic resetting for scripting mode
- Preliminary PM8000 Setup Assistant support
7/26/2013 ION 3.0 Build 13207.02 IONSETUP30_B13207_02.EXE
- Momentum PLC bug fix for data log configuration issue
- Corruption of DEVINFO.DAT file for certain device types when saved
- PM5560 Input Metering configuration issues resolved
- Momentum PLC configuration report
- PM8K Input Metering Prototype (not fully functional yet)
11/13/2013 ION 3.0 Build 13200.03 IONSETUP30_B13200_03.EXE
- Momentum PLC TOC table incorrectly being configured
- CM4xxxx Meter Configuration report hanging due to addition of Alarm Log configuration
- Fixed crashing when viewing waveforms for ION devices with more than 20 waveform modules (PM8K)
- Prototype of an Advanced Security Password Updater (mass update for password of Super-users)
- PM8K Incremental/Conditional Energy + Security Configuration Profiles.
-PM8K RMD Upgrades
- Changes to Scripting to prevent further processing of requests when unable to communicate
11/14/2013  ION 3.0 Build 13318.02 IONSETUP30_B13318_02.EXE - CM3/CM4 Meter Configuration report hanging on added Min/Max/Avg & Sequence of Event log setups
- MV-90 Master file Bug fixes for new xi 3.0 format
- Bug fix for template saving for PM8K with large number of inputs for new Data Mapping modules
 
- Device Scan detection for various new MicroLogic Circuit Breakers and new VEGA ULP gateway.
- PM8k Input Metering/ Conditional Energy Setup Assistant for latest framework/ firmware
- Various improvements for Site Comm Testing & Circuit Breaker Status reports
11/22/2013 ION 3.0 Build 13326.01 IONSETUP30_B13326_01.EXE - CM3/CM4 Meter Configuration not displaying correct setup values for additional data log configurations.
- Bug fix for module deletion for PM8K with large number of inputs for new Data Mapping modules.
- Improvements for Device Scan/Comm Testing/Circuit Breaker Status report feature.
- PM8K Conditional Energy/Input Metering setup assistant and displaying of associated values using Normal Mode verification.
- Bug fix for PLC Clock display issue not displaying correct date/time.
 
 02/06/2014  ION 3.0 Build 14037.02  IONSETUP30_B14037_02.EXE  - Fixed PM6xx Setup screen issues.
- Fixed issue with certain custom setup assistant text being too long.
- Fixed PM8000 Wiring display to reference new HME modules for phase & magnitude instead of Harmonic modules
 - Added setup files for CM2050/CM2150/CM2250.
- Added Flex Channel Assignment for BCPM and support for Veris ASCII representation of the labels
- Increased number of supported sites from present 128 to 256 to allow for large PME systems
- Added support for new PM8000 Custom Display setup wizard
- Modified PM5560 TIme of Use wizard to differentiate between time periods separately from the date range properly
02/21/2014 ION 3.0 Build 14052.02 IONSETUP30_B14052_02.EXE - Fixed issue with stop and hold setup option. - Added FileMode setup options for all PM8/CM data log configurations.
-Enhanced ULP IO Status reporting.
- Working on multi module creation and partial FWN support.
03/18/2014 ION 3.0 Build 14077.03 IONSETUP30_B14077_03.EXE -  Fixes for extended ASCII characters in template pastes.
-  Fixed issues with Modbus Alarm template pasting.
-  Support for new device features for BCPM/EM72XX latest firmware.
04/04/2014 ION 3.0 Build 14094.02 IONSETUP30_B14094_02.EXE -  fixes for E5600 configuration and data log uploads via Modbus
-  Fixed Site scanning and site comm testing issues
-  Fixed M3xxx data log uploads issue
 
04/17/2014 ION 3.0 Build 14107.01 IONSETUP30_B14107_01.EXE   -  Added new setup files for latest BCPM firmware
-  changes to programming for Advanced ION security hiding entered passwords and reporting of passwords via the Advanced Password updater.
05/09/2014 ION 3.0 Build 14129.01 IONSETUP30_B14129_01.EXE -  Fixes for iEM3/PM3xxx setup issues with latest released firmware. -  Improvements to site comm testing, circuit breaker status reports.
05/21/2014 ION 3.0 Build 14135.02 IONSETUP30_B14135_02.EXE -  fixes for iEM3/PM3xxx release firmware changes affecting all setup screens.
-  fix for EM7xxx energy real-time viewer for UINT64 registers.
 
05/30/2014 ION 3.0 Build 14150.02 IONSETUP30_B14150_02.EXE -  Fix issues with template pasting for PM/CM devices for data logs/alarms not programming properly.  -  Added trip unit door status for circuit breaker status report.
06/04/2014 ION 3.0 Build 14155.03 IONSETUP30_B14155_03.EXE -  fixes issue with pasting Alarm Log via Template function incorrectly setting the file number instead of the enable/disable setting.  
06/23/2014 ION 3.0 Build 14174.02 IONSETUP30_B14174_02.EXE -  Fixed PM6xx data log setup -  added PM6xx setup reporting
-  active comm port indication
-  EM1220 support.
07/04/2014 ION 3.0 Build 14185.01 IONSETUP30_B14185_01.EXE -  Fixed PM6xx data log configuration issue
-  fix for PM8 billing log interval not being stored in templates.
-  added PM6xx meter config reporting.
-  Preliminary PM8K Optional I/O setup assistant.
07/11/2014 ION 3.0 Build 14192.02 IONSETUP30_B14192_02.EXE -  Fixed issues with PM6 log setup with invalid memory allocation by adding new viewable memory allocation.  
-  Fixed issue with Micrologic incorrectly displaying wrong device type during scan insertion.
-  Fixed issue with ION parsing of event time quality requests.
-  Fixed issue during log upload to retry if Slave Busy response is received from Modbus gateway.
-  Added missing 73xx Ethernet settings to setup assistant. 
 
07/15/2014 ION 3.0 Build 14196.03 IONSETUP30_B14196_03.EXE -  fixes for MicroLogic breaker device type detection
-  fix for PM5561/PM5563 CT settings when not using 4th CT
-  added support for optional digital input alarms for PM8K.
08/08/2014 ION 3.0 Build 14220.02 IONSETUP30_B14220_02.EXE -  fixes for device scan test, waveform chart guide info update & header resizing
-  fixes for PM5xxx data log upload issue, CM2xxx report saving, ION86xx verification display issue
-  PM8K Setup Assistant changes
 
-  Changes for Script mode to support multiple file
-  Multiple monitor support
-  Resizable ION module dialogs
-  Support for additional advanced security users
09/10/2014 ION 3.0 Build 14253.01 IONSETUP30_B14253_01.EXE -  Improved Setup Assistant Time Sync functionality
- Security Wizard enhancements for new protocol control registers
-  fixes for charting, added more variable sizing of setup dialogs
-  CM4000T fix for Transient alarm
-  PM8K Option Card Reset pulse moved to new register
 
 
09/11/2014 ION 3.0 Build 14254.01 IONSETUP30_B14254_01.EXE -  fix for table event viewers for ION meters not displaying Event Log information properly.  
09/12/2014 ION 3.0 Build 14255.01 IONSETUP30_B14255_01.EXE -  fix for all table log viewers which were having issues showing date/time column due to some changes for upcoming features.  
10/17/2014 ION 3.0 Build 14290.03 IONSETUP30_B14290_03.EXE -  Fixes various event viewer issues
-   various fixes for scripting
-  added new protocol control setup assistant tab for PM8K/8650 if supported, syslog, event reader settings, new security assistant changes
10/31/2014 ION 3.0 Build 14304.02 IONSETUP30_B14304_02.EXE -    Various fixes along with support for new PM8K/8650v2 security changes. -  Brand new installer based on standard =S= software one.
-  Added preliminary support for Modbus/DNP mapping files.
11/14/2014 ION 3.0 Build 14318.01 IONSETUP30_B14318_01.EXE -  fixes for PM8 energy registers displaying incorrectly for large values
-  fixed  issues for Modbus/DNP map file function, support for new PM55xx changes, new IFE model type
 
-  preliminary support for new EM64xx and ION7400 devices.
11/24/2014 ION 3.0 Build 14328.01 IONSETUP30_B14328_01.EXE   -  Added Conzerv EM64xx, ION7400, 8650V2, PM55xx Phase 2 support
12/11/2014 ION 3.0 Build 14339.01 IONSETUP30_B14339_01.EXE -  fix for incorrect IEEE float32 format for data logs
-  fix for invalid CID value crash
-  changes to PM55xx new advance serial features
-  Change to add additional overflow parameters (WhE & VARhE) to all EM64xx setup files
-  Final changes to allow for script inter-process messaging
-  Changes to PM55xx setup files for new Advanced serial settings
-  Change to Test Reset action to more appropriate dialog title and shorter timeout
-  Installer changes to better detect OS and bootstrapper warnings

 
 
1/8/2015 ION 3.0 Build 15008.01 IONSetup v3.0.15008.01.exe - Changes to Register Map file to fix issue with all negative Power Factor readings in all PM7/PM8/CM PowerLogic series of devices. - Code added to support old PowerLogic Power Factor 16 bit format.
- Changes to add AddOn validation settings, ability to cancel unlinking/loading for Load Profile changes when warning is shown plus preliminary changes to add inter-application socket connections
1/22/2015 ION 3.0 Build 15022.02 IONSetup v3.0.15022.02.exe - Bug fix when viewing unassigned group with both sites & groups shown. - Changes to Circuit breaker status reports
- Changes to MicroLogic/ULP folder structure
2/4/2015 ION 3.0 Build 15035.01 IONSetup v3.0.15035.01.exe - Bug fix for system crash when network/device files mismatch.  - Added 8650 Cellular Modem setup options
- Support for site names beginning with a digit
2/19/2015 ION 3.0 Build 15050.01 IONSetup v3.0.15050.01.exe - Bug fixes for PM5xxx device scanning and MV-90 Master file report for new PM8K. - Added Device Tester User and associated multiple gateway building plus scanning.
- New 8650C cellular port enabling if equipped.
2/27/2015 ION 3.0 Build 15058.01 IONSetup v3.0.15058.01.exe   - Added 8650 Cellular network IP setup wizard
- Additional PQ PM8K template string to PWRMLIST.CFG
3/13/2015 ION 3.0 Build 15072.02 IONSetup v3.0.15072.02.exe - Bug fix for ION7400 manager info not being read properly and better error handling when creating modules by name.
- Bug fix for FWN paste issue using non-RMP downloading.
- Added support for PM556X FTP firmware upgrade
4/10/2015 ION 3.0 Build 15100.01 IONSetup v3.0.15100.01.exe - Fixed issue with MicroLogic breakers attached via IFM. - Added support for 8650 V420 and new cellular modem option.
- Added support for IEEE 5-19 template for ION7650 and PM8000 .
- Expanded Advanced Security updater to support up to 50 users and front panel password.
- Added iEM2100 Modbus folder to view real-time information. 
4/17/2015 ION 3.0 Build 15107.01 IONSetup v3.0.15107.01.exe - Bug fixes for circuit breaker/IO reports for IFM connected breakers
- PowerLogic Save Template function not working properly after introducing Save Options root folder
- CM2xxx waveform setup crashing
- Additional work done on supporting upgrades for PowerLogic Modbus upgrading
 
4/24/2015 ION 3.0 Build 15114.03 IONSetup v3.0.15114.03.exe - Bug fixes for device cloning using drag & drop, not listing Circuit Breaker status for only IFE on a site
- Added missing EM3555 files from new installer
- Progress added for PowerLogic FWB upgrade process
 
4/27/2015 ION 3.0 Build 1517702 IONSetup v3.0.15117.02.exe   - Added System Communication Test option. 
5/1/2015 ION 3.0 Build 15121.02 IONSetup v3.0.15121.02.exe - Fixed issues with EM6400NG setup options and semaphore issues. 
- Bug fix for not listing all MicroLogic breakers for system status display. 
- Changed Circuit Breaker Status to a System only option.
- Added System Builder prompt for Device Tester users
5/20/2015 ION 3.0 Build 15140.02 IONSetup v3.0.15140.02.exe - Added missing PM2XXX and EM6400NG setup files to installer
- Fixed issue with ION7400 Data Recorder view missing headings
- Added missing PM8000 IEEE 5-19 template folder to installer
- Fixed Global System Communication test crashing issue
- Added Calibration Wizard support for ION7550/7650/8800
- Standardized Advanced ION Security password programming and validation
- Added new firmware build number for firmware upgrade validation check
- Added check to prevent constant serial port initialization for USB issues 
5/29/2015 ION 3.0 Build 15149.01 IONSetup v3.0.15149.01.exe - Fixed issue with EM6400NG/PM2000 Setup options, IFE/TCP detection
- Fixed serial port issues introduced in recent builds
- Incorrect interpretation of regional settings when period is grouping digit symbol.
- Fixed issue with meter comparison report and TOU setup register
- Added ION7400 additional comm settings via assistant
- US Template/Options integration into main installation.
- Standardization of Advanced security password entry/programming.
6/2/2015 ION 3.0 Build 15153.01 IONSetup v3.0.15153.01.exe - Fixed communication issues due to changes for USB port detection  
6/17/2015 ION 3.0 Build 15168.01 IONSetup v3.0.15168.01.exe - Bug fix for serial port issues - Changes to display editor for new ION7400.
- Changes to EM6400NG/PM2xxx setup files to match present firmware changes. 
6/26/2015 ION 3.0 Build 15177.01 IONSetup v3.0.15177.01.exe - Fixes issue with detecting breakers equipped with IFM Comm modules. - Added preliminary new Enercept support files and device detection.
- Added configurable energy pulsing for ION7550/ION7650 via Setup Assistant.
- Updated Display Setup Assistant wizard to support new ION7400.
7/10/2015 ION 3.0 Build 15191.01 IONSetup v3.0.15191.01.exe - Fixed LED Pulsing Setup for EM6400NG/PM2xxx. - Added support for 12/18 CT versions of BCPM.
- Preliminary auto ION device detection for device testing.
- Standardization for Advanced Security Logon/Passwords.
- Added configurable input for 7650/PM8K Energy Pulsing output
7/24/2015 ION 3.0 Build 15205.01 IONSetup v3.0.15205.01.exe - Fixed issues with auto ION device insertion for PM8K, serial port reporting unavailable when editing, reporting issues during USB upgrades, DGD uploading using 8650 V420, IEEE 5-19 bug fix, Detection of old IFE f/w. - Added device notes which show via tooltips, configurable D4 energy pulsing output for ION7550/ION7650 latest framework.
8/14/2015 ION 3.0 Build 15226.01 IONSetup v3.0.15226.01.exe - Fixed issue with missing TRV-identified ML breakers. - Added preliminary new PDM-based Modbus Slave setup wizard.
- Added support for Access 9410. 
8/21/2015 ION 3.0 Build 15233.01 IONSetup v3.0.15233.01.exe - Bug fixes for ACCESS 9410 firmware upgrade, PM8000/ION7400 Setup Assistant Display Editor, 4720 ACM crashing on certain Min/Max viewers, using different regional settings different than North American standard.  - Added ION7400 LED Pulsing options to Setup Assistant.
- New Modbus Slave wizard support new PDM equipped devices.
- Preliminary support for new iEM34xx/35xx devices.
8/28/2015 ION 3.0 Build 15240.01 IONSetup v3.0.15240.01.exe - Bug fixes for Siemens 9410 template paste, DGD Log extraction issue for PM8K platform, ION7400 Display editor. - Added support for ECC Web Enable/Disable.
9/25/2015 ION 3.0 Build 15268.01 IONSetup v3.0.15268.01.exe - Bug fixes for alarm label issue set to long with CM3/CM4/PM8, Calibration wizard not being allowed properly, Security wizard not handling old SCF files for new V420 firmware for ION8650, PM8K Meter configuration report, waveform viewer not reporting record timestamp properly. - Modified iEM3455/iEM3555 setup options to match firmware.
- Added new ION8800 comm setup registers to Setup Assistant.
10/2/2015 ION 3.0 Build 15275.02 IONSetup v3.0.15275.02.exe - Bug fixes for PM2xxx setup configuration to match release firmware, backup of INI and security user files and restoring after installer, PM8K/ION7400 4-30 Harmonic viewer incorrect reference for V1 57th magnitude  
10/23/2015 ION 3.0 Build 15296.01 IONSetup v3.0.15296.01.exe - Bug fixes for PM2xxx alarm setup, US Template Modbus Master setup wizard, ION8650 V420 Comm Access right with old/no SCF loads. - Added Flicker Log views for ION7400.
11/6/2015 ION 3.0 Build 15310.01 IONSetup v3.0.15310.01.exe - Bug fixes for CM2xxx alarm multiply text, meter config report and scaling. - Additional changes for PM2xxx setup to align with released firmware.
- ION7400 Transformer Loss assistant modified to match template.
11/27/2015 ION 3.0 Build 15331.01 IONSetup v3.0.15331.01.exe   - Added Meter Setup Configuration reporting for all PM2xxx and PM5xxx models.
12/4/2015 ION 3.0 Build 15338.01 IONSetup v3.0.15338.01.exe - Bug fixes for device grouping properties, CM2000 Meter configuration reporting.  - Added preliminary support for PM9000 in development, meter config reporting for BCPM, and firmware upgrading of some PowerLogic power meters using new FWB files.
1/8/2016 ION 3.0 Build 16008.01 IONSetup v3.0.16008.01.exe - Bug fixes for global IPv6 addresses, PM2xxx voltage mode setting, CM4 PQ Summary, 8650 Phasor display for Delta mode, added IEEE 5-19 support for US templates.   
1/29/2016 ION 3.0 Build 16029.01 IONSetup v3.0.16029.01.exe   - Added US Template Display Editor, increased total supported sites, bug fix for ITC-based device calibration, delta mode phasor viewer, CM4 Alarm programming with increased # of alarms.
2/4/2016 ION 3.0 Build 16035.01 IONSetup v3.0.16035.01.exe - Bug fixes for Delta Vector phasor viewer, CM4 additional PQ alarm parameters added to register map.  
2/26/2016 ION 3.0 Build 16057.01 IONSetup v3.0.16057.01.exe - Bugfixes for Unicode time formats, max module waveform viewing, PM2/PM5 alarm indexing issue, Global Comm Testing printouts, phasor viewing of Modbus based devices. - Added PM650 data log view, removal of PM620 data log setup.
3/11/2016 ION 3.0 Build 16071.01 IONSetup v3.0.16071.01.exe - Bug fixes for 3300/4300 ACM setup crash, resetting labels for FWNs without custom labels, missing network info on meter config report, relative setpt programming via wizard. - Digitally signing of installer and Comm Test reporting improvements.
3/18/2016 ION 3.0 Build 16078.01 IONSetup v3.0.16078.01.exe  - Bug fixes for ION7700 upgrades, ION input selection not listing registers, removal of displays for US Display editor, programming of labels reset back to default using new DCFs. - Automatic closing of assistant when downloading new templates.
3/31/2016 ION 3.0 Build 16091.01 IONSetup v3.0.16091.01.exe - Bug fixes for password entries restricted to fewer characters due to font sizing, digital output association not working properly for PM8/CM3/CM4 - Improved template matching to support alternate CFG files.
4/22/2016 ION 3.0 Build 16113.01 IONSetup v3.0.16113.01.exe  - Bug fixes for WFR uploads with no modules, improper alarm associations, framework pasting issue with Event register, CM2 delta phasor. - Added I/O alarm for PM/CM, new ION exception popup, THD Current G to register map, iEM2xxx SN# firmware.
4/29/2016 ION 3.0 Build 16120.01 IONSetup v3.0.16120.01.exe  - Bug fixes for PM2x25 missing Digital I/O Setup entries, ION8800B setup assistant missing setup assistant entries, CM2xxx comm setup requiring soft reset. -  Added new HEP comm protocols to setup assistant.
5/19/2016 ION 3.0 Build 16140.01 IONSetup v3.0.16140.01.exe  - Bug fixes for adding PM9000, swapping of waveform start/trigger time, PF/Freq assigned to Analog Output on CM/PM setup, Circuit Breaker status reporting of Not Found, ICMP usage for TCP connections.  
5/27/2016 ION 3.0 Build 16148.02 IONSetup v3.0.16148.02.exe  - Bug fixes for print dialog crashing, multiple gateway scanning issues, user calibration issues, Removal of ICMP feature and replaced with asynchronous TCP connections. - ION8800 IEC61850 firmware support.
6/30/2016 ION 3.0 Build 16182.01 IONSetup v3.0.16182.01.exe  - Bug fixes for CM3/4 WFC alarm action not properly shown, IPv6 switched to non-blocking sockets, ION8800 new security feature additions, Digital Inputs event logging and label configuration added to HEP assistants.  
8/5/2016 ION 3.0 Build 16218.01 IONSetup v3.0.16218.01.exe  - Bug fixes for display editor when viewing all ION modules, CM/PM WFC alarm/memor config. Restricted password viewing. - Added new IP Setup Assistant for PM8K, ION7400, SIE9410, PM9K devices with DHCP and duplicate IP detection, new Com4 tab for PM9K.
9/9/2016 ION 3.0 Build 16253.01 IONSetup v3.0.16253.01.exe  - bug fix for battery level firmware issue
- bug fixes for IP Setup wizard
- Added new HEP Log memory assistant, new PM22xx folder with Turkish language selection, PM5350P/EM1350 support
11/30/2016 ION 3.0 Build 16335.01 IONSetup v3.0.16335.01.exe  - Bug fixes for viewing signed scaled integers via Modbus, changed labeling for PM9000 and energy pulsing on some products. - New support for EM72xx enhancements; IP wizard testing/reconnection, preliminary EM4200/EM4900 support, ION7400 Top LED sourcing.
12/2/2016 ION 3.0 Build 16337.01 IONSetup v3.0.16337.01.exe  - Bug fixes for missing PM 2 IP sections in Setup Assistant, a few bug fixes for PM5xxx template pasting.  
2/2/2017 ION 3.0 Build 17033.01 IONSetup v3.0.17033.01.exe - Bug fixes for scripting of Modbus based templates - Added upgrade reminder for new device/firmware, PM850 waveform input selection, RVC changes to ION7650 setup assistant.
3/10/2017 ION 3.0 Build 17069.01 IONSetup v3.0.17069.01.exe - Fix for charting issues when viewing CM/PM data logs containing more than 24 parameters (restricting to only selecting a max of 24 now).
- Fix for ION Setup now properly closing down when exiting via Single Device mode.
- Fix for PM2230 Analog I/O programming to allow FLOAT32 values.
- Added warning when older DCFs were saved without feature information when downloading to other feature sets.
- Addition on template load/save functionality for most PowerLogic family of products.
- Ability to view meter timestamps using non-PC local time (devices can now be set to individual time zones or by sites).
- Support for new ION7650 PQ firmware and feature set including new IP assistant support.
- Preliminary support for adding Interval Status information to HHF Export capability.
- Ability to select all logs in the viewer using + A.
- Shortcut to force disconnect a direct TCP connection which might be broken.
3/14/2017 ION 3.0 Build 17073.01 IONSetup v3.0.17073.01.exe - Bug fixes for template pasting issue when storing/restoring settings and charting issues introduced with previous version.  
3/31/2017 ION 3.0 Build 17090.01 IONSetup v3.0.17090.01.exe -Bug fixes for DM6xxx/EM64xx/Enercept template pasting, waveform charting, HHF interval status and CV issues, PM5350P firmware improvements -Added PM7xx scaling
5/5/2017 ION 3.0 Build 17125.01 IONSetup v3.0.17125.01.exe - Bug fix for device DST offset display issue, PM12xx/DM62xx setup request for 42 registers, CM4 Freq precision. -A dded new PM8K Sag/Swell Alarm/Logging wizards, DDD setup for CM4 setup, ION8650 Cellular activation.
5/18/2017 ION 3.0 Build 17138.02 IONSetup v3.0.17138.02.exe -Bug fix for Update checking for new Box html layout.
- Added bug fix for non-US formatted numbers not showing up properly.
Changes for ION over Modbus feature and Sag/Swell Wizard.
6/9/2017 ION 3.0 Build 17160.01 IONSetup v3.0.17160.01.exe - Bug fixes for viewing of data logs 51 thru 64, printing of ION8650 modules, new HEP Modbus Slave enums/breaker status for non-ULP. Changes to support new IoM version, long LogManager operations, SMEC format changes, added PM556x demand parameters. 
7/7/2017 ION 3.0 Build 17188.01​ IONSetup v3.0.17188.01.exe Fixed issue with Siemens 9340/9360 needing matching folder for model - Added support for new hybrid series meters, multi-mastering support with random ID for IoM.
7/28/2017 ION 3.0 Build 17209.01​ IONSetup v3.0.17209.01.exe Bug fixes for device timezone display selection, zero fill enable restriction, splitting of hybrid devices into each device type, improper min/max log display.  
8/31/2017 ION 3.0 Build 17243.01​ IONSetup v3.0.17243.01.exe EM4900 setup fixes, various IPv6 fixes, EM4200 improvements - Support for new PM Hybrid devices
10/5/2017 ION 3.0 Build
17278.02
IONSetup v3.0.17278.02.exe - fixes for 8650 DRE Zero FIll and Cellular setup assistant issues plus HEP setup assistant for Localization settings. -Added EM42xx/PM2220R setup files
11/3/2017 ION 3.0 Build 17307.01 IONSetup v3.0.17307.01.exe - bug fix for ION/Modbus, IP Setup wizard, DRE Zero Fill fix moved to template functionality. - Added software update dialog indicating progress, firmware upgrade improvements and fixes
01/19/2018 ION 3.0 Build 18019.01 IONSetup v3.0.18019.01.exe   - Added detection for Model 98A digital temperature controller, CM2xxx data log viewing tables, added more commands to TCP operation mode.
03/02/2018 ION 3.0 Build 18061.01 IONSetup v3.0.18061.01.exe - Bug fixes for device scanning, Model 98A device detection, multi-line setup registers with double quotes and CRLF - Added serial hardware selection for timing profiles (optical probes), 4G cell modem setup assistant support
03/09/2018 ION 3.0 Build 18068.01 IONSetup v3.0.18068.01.exe - Bug fix for improper waveform indexing, energy registers not restoring, allow device name modification during device scan, reset meter event log after template paste.  
03/16/2018 ION 3.0 Build 18075.02 IONSetup v3.0.18075.02.exe - Bug fixes for IONTKN.DLL time stamp issue, older ION device scan not detected properly, HEP 4-30 table file fixed, FWN template pasting. - Added improved input linking and advanced ION module viewing capabilities.
05/04/2018 ION 3.0 Build 18124.01 IONSetup v3.0.18124.01.exe - Bug fix for PowerLogic reconnect crashing. - Added new PM1000H models, option to save HHF files using PC Localtime instead of UTC, ION9000 feature enhancements.
05/30/2018 ION 3.0 Build 18150.01 IONSetup v3.0.18150.01.exe - Bug fixes for Modbus Slave assistant/BCPM detection. - Changes to address IONTKN.DLL reporting too many decimal places, CM4000T warnings added when modifying Transient alarm/EN50160 enabled. Support for EM42xx devices finialized, I/O Port warning text added.
05/31/2018 ION 3.0 Build 18151.01 IONSetup v3.0.18151.01.exe - Bug fixes for Modbus Slave assistant/BCPM detection. - Changes to address IONTKN.DLL reporting too many decimal places, CM4000T warnings added when modifying Transient alarm/EN50160 enabled, Support for EM42xx devices finalized, I/O Port warning text added.
06/08/2018 ION 3.0 Build 18159.03 IONSetup v3.0.18159.03.exe - Fixed bug with DNP setups crashing via assistant. - Modified PM8K/ION7400/ION9K Setup Assistants to align with new V2.0 templates and firmware. Added new ION8650 US setup assistants, scan/comm support for new MTZ breakers.
06/19/2018 ION 3.0 Build 18170.01 IONSetup v3.0.18170.01.exe - Fixed hanging issue when no network files present introduced with previous release. Bug fix for template paste with restoring blank namespace settings. - Changed shown time since last time sync to non-second format.
06/22/2018 ION 3.0 Build 18173.01 IONSetup v3.018173.01.exe - Bug fixes for improperly using transferred network files, setup assistant crash when programming enumerated register using new string length. - Added ability to move to input linked ION modules in Advanced ION module setup.
07/13/2018 ION 3.0 Build 18194.01 IONSetup v3.0.18194.01.exe - Bug fixes for commas shown instead of decimal point in Assistant, DGD access code no accepting leadings zeros, E5600 upgrade not properly performing ESC characters. - Added new TOU holiday entry for Honduras, multi-module tiling/module creates during Edit.
07/20/2018 ION 3.0 Build 18201.01 IONSetup v3.0.18201.01.exe - Bug fixes for editing of string register via assistant, Sag/Swell wizard not properly programming waveform/comtrade, crashing on Schneider module. - Added Transient Alarm/Logging for ION9K/9810, Master reset checking event log.
08/02/2018 ION 3.0 Build 18214.01 IONSetup v3.0.18214.01.exe - Bug fixes for not reading network information when starting in Single Device mode, ION over Modbus incorrect CRC checking, incorrect DI1 setup references, E5600 upgrade issues. - Added Transient wizard/alarming for ION9K/9810, memory references for HEP.
08/02/2018 ION 3.0 Build 18214.02 IONSetup v3.0.18214.02.exe - Bug fixes for HEP display editor issues, loading of large network files from other PCs and saving it after prompted, fix for Master Reset not properly showing completion if successful.  
08/02/2018 ION 3.0 Build 18214.03 IONSetup v3.0.18214.03.exe - Bug fixes for not reading network information when starting in Single Device mode, ION over Modbus incorrect CRC checking, incorrect DI1 setup references, E5600 upgrade issues. - Added Transient wizard/alarming for ION9K/9810, memory references for HEP.
08/24/2018 ION 3.0 Build 18236.01 IONSetup v3.0.18236.01.exe - Display wizard bug fix for ION7400/ION9K. - Updates to all HEP PQ wizards, activated meter checklist functionality by default. Display tooltip indicating register bounds. Enhanced phasor viewer to include polarity setup access.
08/24/2018 ION 3.0 Build 18236.02 IONSetup v3.0.18236.02.exe - Display wizard bug fix for ION7400/ION9K. - Updates to all HEP PQ wizards, activated meter checklist functionality by default. Display tooltip indicating register bounds. Enhanced phasor viewer to include polarity setup access.
08/27/2018 ION 3.0 Build 18239.02 IONSetup v3.0.18239.02.exe. - Bug fixes for ION Setup crash when accessing any dialog with an available tooltip and reporting of build file version of DCF templates. - Allow user access to disabling Meter Checklist option.
08/31/2018 ION 3.0 Build 18243.01 IONSetup v3.0.18243.01.exe - Fixed issues with Large/Small RMD upgrades, setpoint learning not updating correctly, 73xx firmware upgrade issue, editing of string registers via assistant.  
09/07/2018 ION 3.0 Build 18250.01 IONSetup v3.0.18250.01.exe - Fixed issue with 61850 GGIO source label differences between PowerPC/HEP devices, missing 5-19 reference for ION7400, proper tagged build referencing, increased elapsed timeout for old RMD upgrading.  
09/21/2018 ION 3.0 Build 18264.01 IONSetup v3.0.18264.01.exe - Bug fixes for HHF file generation, back up of network files, upgrade option via device properties, zero length Modbus Ident responses, incorrect waveform point access during charting. - Added TLS certificate upload to 8650 assistant, IMD/IFL models.
10/12/2018 ION 3.0 Build 18285.01 IONSetup v3.0.18285.01.exe - Fixed program crash when starting up in Metershop mode. Removed menu options from Siemens version.  
11/02/2018 ION 3.0 Build 18306.01 IONSetup v3.0.18306.01.exe - Fixed issues with EM4900 incorrect folder names, additional setup options added, incorrect HEP energy pulsing assistant references, added semi-colon option for CSV files.