Quantcast

General Accessories Panel Mount Outlet, 10A, 1-2mm Socket

General Accessories Panel Mount Outlet, 10A, 1-2mm Socket

General Accessories Panel Mount Outlet, 10A, 1-2mm Socket

Item Number: 193-1

Retail
N/A
RRP (Inc. GST)

Datasheet

Specifications

Design

Range of product

PDL

Product brand

Clipsal

Physical

Quantity per set

set of 1

Marking

without marking

Local signalling

without light indicator

Mounting support

panel

[In] rated current

10 A

[Ue] rated operational voltage

230...240 V AC

Standards

  • AS/NZS 3100
  • AS/NZS 3112
    • Others

      Cover type

      complete housing

      Network frequency

      50 Hz

      Diameter

      32 mm
      Show all specifications

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • Technical Leaflet

      • Corporate Marketing

      Frequently Asked Questions

      hide show

      Is it possible to connect Tm Remote Control 18311 with C120.

      The Tm Remote Control, reference-18311 is designed only to use with C60 MCB not with the C120 MCB. Tm remote control, reference- 18312 is for C120 (2Pole).

      It is not recommended to use the 18311 for C120 (2Pole) MCB as the inrush current for 18311(TmC60-4P) is lower than the 18312 (TmC120-2P).

      What is the Acti-9 replacement for the Multi-9 19771?

      The Acti-9 replacement for the Multi-9 19771 is the A9D32606- Acti 9 iDPN N Vigi - RCBO - 1P+N - 6A - C Curve - 6000A - 30mA - type A

       

      Is 240 volt replacement control coil available for LC1D11500?

      Issue:
      Identifying replacement coil part number

      Product Line:
      IEC contactors and starters

      Environment:
      Products sold and used in the United States

      Cause:
      Replacement control coil needed for older style Tesys Contactor

      Resolution:
      Yes, order LX1D8U5 for 50 hertz, LX1D8U6 for 60 hertz or LX1D8U7 for 50/60 hertz. Average coil consumption is 300 VA inrush 22 VA sealed for 50 hertz, 300 VA inrush 22 VA sealed for 60 hertz and 280 to 350 VA inrush 2 to 18 VA sealed for 50/60 hertz.


      CTA-ID : 11321

      Upgrading a 32-bit version of PowerChute Network Shutdown to a 64-bit version on Windows

      Issue:
      Upgrading a 32-bit version of PowerChute Network Shutdown to a 64-bit version on Windows

      Product:
      PowerChute Network Shutdown

      Environment:
      Windows 64 bit system

      Cause:
      Upgrade for 32 bit OS to 54 bit

      Solution:

      We do not support this. We recommend that you do a full installation after manually uninstalling the old version first. 

      PowerChute Network Shutdown Configuration Files Explained

      Issue:
      Prior to version 3.x of PowerChute Network Shutdown (PCNS), configuration data was stored in a proprietary binary file. Users found configurations difficult to implement and distribute with this method.
      From version 3.x, and above PCNS has a text-based INI configuration store for PowerChute.

      Product Line:
      PowerChute Network Shutdown versions 3.x, 4.x

      Environment:
      All supported OS

      Cause:
      Informational

      Solution:
      Please review the attached config.ini file explained.pdf

       


       

      Video: Disabling BPDU (Bridge Protocol Data Unit) Packets on a PM8000/ION7400 Meter

      Issue
      A PM8000 meter may disable an ethernet port on a network port upon connection due to a BPDU guard on a network. PM8000 meters send out BPDU packets while RSTP (Rapid Spanning Tree Protocol) is enabled. 

      Product Line
      PM8000

      Cause
      A BPDU guard being enabled on the network.

      Resolution
      Disable RSTP from the meters Ethernet Settings:
      On the Front display:
      1. Navigate to Setup Menu > Communications Setup
      2. Scroll to the Ethernet Setup Menu using the Up and Down arrows.
      3. Select the Enable RSTP option and set it to No.
      In ION Setup:
      1. Click on the  Device that you want to set up.
      2. Click on the View Setup Options Only tab from the tool bar.
      3. While holding on the Ctrl key, left click on your PM8000.
      4. Click on Comm Module.
      5. Double-click Ethernet module and click on the Setup Registers tab.
      6. Scroll until you see the Enable RSTP option, Edit it and set it to No, then Click the OK button.
      7. Click the Send button to apply the change to the meter.


      The video below shows how to use ION Setup to disabling BPDU (Bridge Protocol Data Unit) Packets on a PM8000/ION7400 Meter.



      This will disable BPDU packets from being sent out by the PM8000/ION7400 meter.

      NOTE: This does not impede the switch functionality of the PM8000s ethernet ports.

      For more information on the role of the RSTP function in the PM8000 meter, kindly refer to pages 45 and 48 of the user manual: PM8000 series user manual
      For a general understanding of RSTP, refer to the Cisco link: Understanding Rapid Spanning Tree Protocol
      For a general understanding on how a BPDU guard works, refer to the Cisco link: Configuring Spanning Tree PortFast, BPDU Guard, BPDU Filter, UplinkFast, BackboneFast, and Loop Guard
      Show More