General Accessories Panel Mount Outlet, 10A, 1-2MM Socket

Catalogue Number: 193-1
RRP (Inc. GST)


hide show
Range of product
Product brand
Quantity per set
set of 1
Cover type
complete housing
without marking
Local signalling
without light indicator
Mounting support
[In] rated current
10 A
[Ue] rated operational voltage
230...240 V AC
Network frequency
50 Hz
32 mm
  • AS/NZS 3100
  • AS/NZS 3112
    • Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • Technical Leaflet

      • Corporate Marketing

      Frequently Asked Questions

      hide show

      What is the Acti-9 replacement for the Multi-9 19771?

      The Acti-9 replacement for the Multi-9 19771 is the A9D32606.

      Is it possible to connect Tm Remote Control 18311 with C120.

      The Tm Remote Control, reference-18311 is designed only to use with C60 MCB not with the C120 MCB. Tm remote control, reference- 18312 is for C120 (2Pole).

      It is not recommended to use the 18311 for C120 (2Pole) MCB as the inrush current for 18311(TmC60-4P) is lower than the 18312 (TmC120-2P).

      Is 240 volt replacement control coil available for LC1D11500?

      Identifying replacement coil part number

      Product Line:
      IEC contactors and starters

      Products sold and used in the United States

      Replacement control coil needed for older style Tesys Contactor

      Yes, order LX1D8U5 for 50 hertz, LX1D8U6 for 60 hertz or LX1D8U7 for 50/60 hertz. Average coil consumption is 300 VA inrush 22 VA sealed for 50 hertz, 300 VA inrush 22 VA sealed for 60 hertz and 280 to 350 VA inrush 2 to 18 VA sealed for 50/60 hertz.

      CTA-ID : 11321

      Upgrading a 32-bit version of PowerChute Network Shutdown to a 64-bit version on Windows

      Upgrading a 32-bit version of PowerChute Network Shutdown to a 64-bit version on Windows

      PowerChute Network Shutdown

      Windows 64 bit system

      Upgrade for 32 bit OS to 54 bit


      We do not support this. We recommend that you do a full installation after manually uninstalling the old version first. 

      PowerChute Network Shutdown Configuration Files Explained

      Prior to version 3.x of PowerChute Network Shutdown (PCNS), configuration data was stored in a proprietary binary file. Users found configurations difficult to implement and distribute with this method.
      From version 3.x, and above PCNS has a text-based INI configuration store for PowerChute.

      Product Line:
      PowerChute Network Shutdown versions 3.x, 4.x

      All supported OS


      Please review the attached config.ini file explained.pdf



      Video: Disabling BPDU (Bridge Protocol Data Unit) Packets on a PM8000/ION7400 Meter

      A PM8000 meter may disable an ethernet port on a network port upon connection due to a BPDU guard on a network. PM8000 meters send out BPDU packets while RSTP (Rapid Spanning Tree Protocol) is enabled. 

      Product Line

      A BPDU guard being enabled on the network.

      Disable RSTP from the meters Ethernet Settings:
      On the Front display:
      1. Navigate to Setup Menu > Communications Setup
      2. Scroll to the Ethernet Setup Menu using the Up and Down arrows.
      3. Select the Enable RSTP option and set it to No.
      In ION Setup:
      1. Click on the  Device that you want to set up.
      2. Click on the View Setup Options Only tab from the tool bar.
      3. While holding on the Ctrl key, left click on your PM8000.
      4. Click on Comm Module.
      5. Double-click Ethernet module and click on the Setup Registers tab.
      6. Scroll until you see the Enable RSTP option, Edit it and set it to No, then Click the OK button.
      7. Click the Send button to apply the change to the meter.

      The video below shows how to use ION Setup to disabling BPDU (Bridge Protocol Data Unit) Packets on a PM8000/ION7400 Meter.

      This will disable BPDU packets from being sent out by the PM8000/ION7400 meter.

      NOTE: This does not impede the switch functionality of the PM8000s ethernet ports.

      For more information on the role of the RSTP function in the PM8000 meter, kindly refer to pages 45 and 48 of the user manual: PM8000 series user manual
      For a general understanding of RSTP, refer to the Cisco link: Understanding Rapid Spanning Tree Protocol
      For a general understanding on how a BPDU guard works, refer to the Cisco link: Configuring Spanning Tree PortFast, BPDU Guard, BPDU Filter, UplinkFast, BackboneFast, and Loop Guard

      What to do if a message with ID 0x1445 or 0x1446 is displayed on the MicroLogic X screen.

      These messages are generated by the MicroLogic X Service Life Monitoring function of the MicroLogic X control unit, to indicate that a predefined usage threshold is reached.

      Refer to the MicroLogic X User Guide:

      Data Center Expert | Remote repository data overwritten if two appliances are using the same share.

      Information is overwritten if two or more StruxureWare Data Center Expert servers use the same remote repository and share.

      Product Line
      StruxureWare Data Center Expert (DCE)
      - Basic Appliance (AP9465)
      - Standard Appliance (AP9470)
      - Enterprise Appliance (AP9475)
      - Virtual Appliance (AP94VMACT)
      StruxureWare Central (SWC)
      InfraStruXure Central (ISXC)

      StruxureWare Data Center Expert (all versions)
      StruxureWare Central (all versions)
      InfraStruXure Central (all versions)
      Remote Shares (Windows or NFS)

      If you add a remote repository that is already in use by another DCE server, the repository.id file is overwritten (which contains the MAC address of the server and mounted date). This may cause problems if multiple servers are using the same remote share.


      Each StruxureWare Data Center Expert system needs it's own unique repository/shared folder.  These can be located on the same system, but the mounted folder must be different between the systems.

      How much exhaust clearance is needed for a NetShelter CX cabinet?


      The NetShelter CX may overheat if there is not proper clearance for airflow.
      Product Line:
      NetShelter CX
      All models and serial ranges.
      Improper spacing can cause overheating.
      Resolution :
      See attached file.
      NetShelter CX Wall Clearance
      The exhaust fans of the NetShelter CX vent to the sides. The back of the cabinet can be placed against a wall if desired.
      If the cabinet is being installed in a corner please leave at least 6 inches of open space between the side of the NetShelter CX and the wall.
      It is not recommended to install a NetShelter S X where the back and both sides are against a wall.
      Please see attached file for a graphic depiction of the clearance.

      Configuring Virtual Machines to shut down when a Hyper-V host is commanded to shut down.

      How to configure the shutdown of virtual machines when a Hyper-V host is commanded to shut down on Windows Hyper-V

      PowerChute Network Shutdown
      PowerChute Business Edition

      Windows Hyper-V

      In order for virtual machines to shut down gracefully when the host is commanded to shutdown, you need to configure each Virtual Machine to shut down the guest operating system.

      To do this:
      1. In Hyper-V Manager, right click on the VM and select Settings.
      2. Under Management check if Integration Services option is shown – if it is proceed to step 4.
      3. If Integration Services is not already installed:
        • Right click on the VM and select Connect.
        • In the console window select the Action menu and choose “Insert Integration Services setup disk”.
        • Double-click the VM guest disk to continue with the installation.
      4. In Hyper-V Manager, choose the VM and then "Settings". Click on the Integration Services option and ensure “Operating System Shutdown” is enabled.
      5. Choose "Automatic Stop Action" option under Management.
      6. Choose "Shut down the guest operating system".
      For PowerChute Network Shutdown v3.1 and above, steps 5 and 6 are not required if you have enabled the VM shutdown option in PowerChute when Hyper-V Support has been enabled.
      If you wish to allow Hyper-V to handle VM shutdown instead then enable the Automatic Stop action as outlined in steps 5 and 6 above.

      What limit switch should I use to monitor the operating direction of a sliding gate?

      In order to monitor the operating direction of a sliding gate (detecting movement to the right or to the left) using a single detector, the best solution is to use a 2-step limit switch.

      There are many models of limit switch, but the standard low-cost model with IP66 degree of protection and an operating temperature between -25°C and + 70°C is available in the XCKJ range.

      Standard XCKJ

      The best solution consists therefore in combining:

      • A ZCKJ404 body/contact assembly
      • A ZCKYxx operating head
      • This ZCKJ404 body is made up of 4 contacts distributed as follows:
      • Two 13-14 and 11/12 contacts for activation on the right
      • Two 23-24 and 21-22 contacts for activation on the left
      Cable entry:

      As standard, cable entry for Pg13, part number ZCKJ404

      • ISO M20x1.5 tapped cable entry, part number ZCKJ404H29
      • 1/2 NPT tapped cable entry, part number ZCKJ404H7

      XCKJ for use at low and high temperatures

      For an operating temperature up to - 40°C, use body part number: ZCKJ4046 (add H29 or H7 according to the cable entry).

      For an operating temperature up to +120°C, use body part number: ZCKJ4045 (add H29 or H7 according to the cable entry).

      Caution: For these non-standard temperatures of - 40°C and + 120°C, the operating heads are different to those used between -25°C and + 70°C (see catalogue).


      What to do if a message with ID 0x1480, 0x1481 or 0x1482 is displayed on the MicroLogic X screen.

      These messages are generated by the Maintenance Schedule function of the MicroLogic X control unit, to indicate that a preventive maintenance operation is due.

      Refer to the MicroLogic X User Guide: Refer to the Masterpact MTZ Maintenance Guide:
      Show More