saddle conduit 12mm zinc

Series 170M Fixing Accessories, Metal, Saddles, 12.7Mm Zinc Plated

Catalogue Number: 170GM
saddle conduit 12mm zinc
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
Series 170M
Diameter
12.7 mm
Material
metal
Surface treatment
zinc plated
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What is the dimensions for a PDL699TBR

Dimensions 48mm x 170mm

What is the part number for a 25Watt downlight with a 170mm cutout?

The part number for a 25Watt downlight with a 170mm cutout is - TPDL402H1

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=TPDL402H1
User-added image
 

What is the closest alternative to a OW8450 Exhaust fan?

The closest alternative is a 7006A. The cut-out is slightly different as the OW8450 had a cut-out of 170mm where as the 7006A has a cut-out of 180mm so it may not fit the existing hole.

Dimensions for PDL 699 699TB 699 TBR 699TB/15

Plate 48mm (H) x 170mm (W)
Mounting Centres: 150mm
Suits PDL 567L mounting Block & PDL 559 Mounting Bracket

Is the 17065 the same as the A9M17065

Yes there no technical difference

What is the alternate part number for 17072

 Replacement is a A9MEM3210

What is the replacement for a 17072

 The replacement is a A9MEM3210.

What is the part number for a warm white LED downlight with a cut out of 185mm?

No Warm white with that size cut out ....
TPDL402H1 - 170mm cut out , Cool white
TPDL402H2 - 200mm cut out , Cool white
For further information , visit links below:-
https://www.clipsal.com/Trade/search-results?q=TPDL402H1
https://www.clipsal.com/Trade/search-results?q=TPDL402H2
 

What is the alternate part code for a 17070

 The alternate part code is A9MEM3100

What is the replacement for 17075 ( ME3) Watt hour meter?

The replacement for 17075 ( ME3 ) Watt hour meter is A9MEM3100

A9MEM3100
iEM3000 energy meter - 63 A
For more information see:
https://www.schneider-electric.com/en/product-range-selector/63057-energy-meters

Dimension for PDL 663VH

Plate 130mm x 32mm

What is the dimension of the PDL 90 - Ceiling Mounting Ball Light?

175mm diameter ball

Is the dimensions for a Clipsal C2016/2-WE the same as C2016/2S

 No, the C2000 is 48mm x 160mm x 28mm  with 122 mounting centres

What are the dimensions for ABL8REM24050

 Dimensions 54 wide x 120 high x 120mm deep to the din rail face

What are the dimensions of the 535 power tower

 Dimensions 158 x 158 x 140mm high

What is the dimensions for a PDL 535WH

 Dimensions -  158mm x 158mm x 140mm high.

What is the diameter for the Clipsal 755PSM smoke alarm

The diameter is 140mm

What is the part number for a moduline 130mm drop in lid?

The part number is PL125CL*

 

Only 125mm not 130mm and drop in was discontinued only have a S clip on lid now

Is there a 100mm Saddle?

Yes, the part name is 178/100PP

Is the calibration equipment for PowerLogic and ION meters ISO 17025 certified?

Issue
ISO 17025 certification for calibration equipment used for PowerLogic and ION meters

Product Line
PowerLogic Meters
ION Meters

Environment
ISO 17025 Certification

Cause
Customer is unable to find certification for Schneider Electric’s calibration equipment used for the PowerLogic ION meters

Resolution
PowerLogic and ION meters' calibration equipment is not currently certified per ISO 17025 standards. The reason for this is that the calibration houses (e.g. 3rd party) are required to meet ISO 17025 certification standards as well. Not all the calibration houses used for PowerLogic and ION meters meet these requirements; Schneider Electric, therefore, is not able to attain ISO 17025 certification on PowerLogic and ION meters.

The ION meters are shipped from the factory with a certificate of compliance and calibration. In the event that this certificate was lost or never recieved, a copy can be obtained by providing the meter's serial number and sending the request to technical support.

What is the part number for the replacement cartridge for the 970RM surge arrester?

The part number for the replacement cartridge for the 970RM surge arrester is - 970PM
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=970PM
User-added image

What is the dimensions for ABL8MEM12020

 Dimensions 59mm x 100mm x 60mm

What is the replacement for a 970RM?

The closest alternative for a 970RM is a 940RMT/1.

What are the dimensions of the 4CC9-WE?

The dimensions of the 4CC9 are 178mm Wide, 206mm High and 104mm Deep.

What is part number for 150mm 2m cable cover?

Part number is 287/150

Are the NSX250 & 400's the same width

 No the nsx250 is 104mm wide and the 400 is 140mm

What is the width of T5 widebody bare battens?

65mm, the doubles are 120mm

What are the measurements for a C2016/2?

The measurements for the C2016/2 are 48mm (H) x 160mm (W) x 28mm (D) with a mounting centre of 122mm 

What is the minimum ceiling cavity for a 7600ATP?

The minimum recommended cavity to instal 7600atp is 215mm the unit itself is 180mm high.

What is the part code for a trunking divider 100mm

The part code is 900D100S-WE

What size ducting goes with CEF30R-WE?

The CEF30R-WE uses 100mm ducting

What is the part number for a 100mm coupling for Communication conduit?

The part number for a 100mm coupling for Communication conduit is - C242P100

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=C242P100
User-added image

What are the safety clearance dimensions for a LC1B range contactor switching with the DC voltage.

The safety clearance distances are as per the attached table. These values are given for AC voltage; however these values are same as in case of DC voltage.
Note: With DC application the safety clearance in front of contactor will be 100mm (X1) and up to the arc chamber will be 150mm (X2) because the voltage per pole is limited to 440VDC.

What is part number for 150mm inline axial fan OErre?

Part number is a OW1950.

What is the part number for a 150mm wall exhaust fan with pull cord?

The part number for a 150mm wall exhaust fan with pull cord is - 7008A

For further information ,visit link below:-
https://www.clipsal.com/Trade/search-results?q=7008A

What is part number for 150mm bell mouth coupling?

The part number for 150mm bell mouth coupling is a - 288/150

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=288/150


User-added image

What is the dimensions for a PDL 664VH four aperture architrave grid plate ?

The Overall Dimensions - 130mm x 32mm
Mounting Centres - 114mm

Is there any alternative for the old Moduline series EA31C 130mm high for gpo shroud kits and covers?

There is no offer at all for the EA31C series as this was discontinued a long time ago and had a drop in lid which is also discontinued and there is no option for power shroud etc.

What is the part number for a 2 gang Modena switch that is less than 100mm wide?

The part number for a 2 gang Modena switch that is less than 100mm wide is - M8082LVA

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=M8082LVA
User-added image

What are the dimensions for the 4C24FD?

The dimensions for the 4C24FD are 342mm wide, 420mm high and 110mm deep.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=4C24FD 

what is the replacement part for a 970rm ?

 
 
 
 
the 970rm has been replaced by the 940rmt/1

What is the part number for 13 hole active link with 2 tunnels for 150mm cables?

The part number for 13 hole active link with 2 tunnels for 150mm cables is - L13/150R

For further information visit link below:-
https://www.clipsal.com/Trade/search-results?q=L13/150R
 

What is the part number for a 150mm wall exhaust fan with auto shutters and switched remotely?

The part number for a 150mm wall exhaust fan with auto shutters and switched remotely is - 7006A
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=7006A

What is the part number for tunnel/crimp lugs for a NSX160B C/B for 150mm cable?

The part number for tunnel/crimp lugs for a NSX160B C/B for 150mm cable is - LV420253

For further information , visit link below:-
https://www.schneider-electric.com.au/en/search/+LV420253
User-added image

What is the part number for a 150mm wall ex-fan?

The part number for a 150mm wall ex-fan is - 7005A or 7007A

For further information, visit the links below:-
https://www.clipsal.com/Trade/search-results?q=7005A
https://www.clipsal.com/Trade/search-results?q=7007A

User-added image

Does Clipsal have a metal board, at least 36 pole and less than 150mm deep?

Yes, we have the 4C48FD which is only 105 mm deep.
For more information, please refer to the link:​https://www.clipsal.com/Trade/Products/ProductDetail?catno=4C48FD

Is 7005A, 150mm window mounted exhaust fan, double insulated?

7005A is not double insulated. Hence it needs to be earthed.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=7005A

What is the part number for the replacement kilowatt hour meter for the 17075?

The part number for the replacement kilowatt hour meter for the 17075 is - A9MEM3100

For further information , visit link below:-
https://www.schneider-electric.com.au/en/search/A9MEM3100
User-added image

What is the minimum spacing requirements above and below an Advantys STB island segment?

For proper heat dissipation, allow a minimum clearance of 100mm (3.94in.) above and below each island segment.