System words 160 through 167 (%SW160 - %SW167) provide health status of M340 racks 0 through 7. 0 indicates an IO fault. 1 indicates correct operation of the IO module.
Unfortunately not, we do not have a replacement for 4RCBE116/30Q Quicklag 16A RCBO.
Unfortunately we do not have a mounting block to suit 31/3VX, large format blank switch plate.
Yes, it is rated up to 16A
It means 20A incandesent, 16A fluro
The part number for a Schneider, 60 pole, indoor DB with 160 amp main switch is an MB260E31.
Use a PDL654PBM - Push Button Universal Dimmer Module.
This has a minimum load of 10W
User name and password lengths for InfraStruXure Central and Netbotz appliances for an SNMP version 3 inform.
Netbotz SNMP v3
SNMP version 3 requirements
v3 informs only work under certain circumstances.
md5/des user/password must be 8-15 characters
md5/aes user/password must be 8-15 characters
sh1/aes user/password must be 16+ characters
sh1/des user/password must be 16+ characters
for md5 the user name and password only work if they are between 8-15 characters.
for sh1 the user name and password only work if they are >16 characters.
It means the relay module can switch a load of up to 16A resistive or a 6A fluorescent load.
Yes, it is a PDL 600RM with a 16A resistive rating
It means it has a 16A fluro rating
The part number for the 48 Poles IP42 Metal Distribution Board with 160 Amps Main Switch is "MB248D31"
Unity Pro XL V6.0 introduced MBP_MSTR FC 16. This function code allows the user to change the log in status of an ethernet port. In cases where you are unable to connect to a Quantum PLC because the ethernet port is seen as " Already logged in" this FC will prove useful. MBP_MSTR FC 16 will allow you to change the port status to "logged off" and allow the Unity user to log in.
This would be preferable to using FC 10 (Reset Option module) or performing a power cycle of the PLC.
There are minimum requirements that the user must meet in order to use MBP_MSTR FC 16. 140NOE77101 minimum firmware version....4.9
140NOE77111 minimum firmware version....5.0
140CPU65x xx minimum copro firmware version 3.5
Legacy KB System (APS) Data: RESL207500 V1.0, Originally authored by DaSo on 02/24/2012, Last Edited by DaSo on 02/24/2012
Related ranges: Unity Pro - SoCollaborative software
No there is no escutcheon for the INS40 - 160 range
What is the maximum cable distance from an ATV312 drive to the motor?
ATV312, Altivar 312, ATV320, Altivar 320
The ATV312 shows that an output filter or choke is required for any cable distance between the drive and motor exceeding 164 feet (50 meters). Above 164 feet, there is a change with shielded vs non-shielded.
From 164 feet to 330 feet (100 meters) you can use the LR filter cell or a motor choke.
From 164 feet to 660 feet (200 meters) you can use the LR filter cell or a motor choke.
The only difference between the 8020SCP423 and 8020SCP424 SY/MAX controllers is the size of their user memory. The 8020SCP423 has 8K of RAM. The 8020SCP424 has 16K of RAM.
As per the catalogue lsth050wh is supplied with a 16W driver. The LED strip kit has 4.8W/m. So theoretically when the strips are connected in series, 3.3 metres can be run off a driver.
We can make it up with following two items:
Part number LV431403 - NSX250F Basic Frame
Part number LV430470 - Micrologic 2.2 Trip Unit 160 Amps
Issue: Where are the A1, B1, and C1 connections on the Altistart ATS23?
Product Line: ATS23
They are across the line, 1L1, 3L2, and 5L3 connections but on the U70, D12, D16N or D30N you do not have A1 (A2), B1 (B2) and C1 (C2) connections for the shorting contactors.
When attempting to connect to a serial device in ION Setup a user receives the message: ‘Serial port not available’.
ION Setup Serial Connections
By default ION Setup supports 16 serial connections and 240 TCP connections. (TCP connections are defined as sites where one can have, say 10 Ethernet devices, connected to a single Ethernet site which will not be counted as 10 TCP connections).
This default division between serial and TCP connections can be controlled by modifying a setting located in the IONSETUP.INI file. Please change the ‘SerialPorts’ to the desired number from 16. Save the change before exiting the file.
You can locate the directory that contains the IONSETUP.ini file by opening ION Setup and selecting "Tools -> Options -> Directories"
The "Config Directory" file path is where the IONSETUP.ini file is located.
Change the value from 16 to 17 to gain an additional serial port.
Please note, the serial port number increment will take place in expense of TCP ports. So, if we increase the serial connections to 17, there will be 239 TCP connections available.
No - for 160 , will need to use NSX160, depth = 126mm
MCB maximum size 125A
The PDL600RM is rated 16A resistive (6A inductive) and has a NO & NC contact. It is a 600 series module so can be mounted in a grid plate, but doesn't have to be as there is no built in indication as to the state of the contacts.
The difference between the 8020SCP424 and 8020SCP444 SY/MAX controllers is the memory type utilized. Both units have 16K of user RAM; however the 8020SCP444 also offered 11K of nonvolatile memory for program storage on UVPROM.
No, unfortunately the WIBM550R is no longer available.
The replacement is the 56AI550
Some of the key features are:
- 5 round pins
- 204 mm Height x 101 mm Width x 165 mm Depth
- 10 - 16 mm conductor terminal
For further information please visit https://www.clipsal.com/Trade/search-results?q=56ai550
Maximum drop length is 164 feet.
Minimum drop length is 8.5 feet.
Maximum trunk length is 8400 feet using RG11 and 4600 feet using RG6.
Maximum overall attenuation for the network is 35 db.
Minimum distance between taps is 8.5 feet.
Minimum distance between the RIO head and the self terminating "F" adapter is 18 inches.
Minimum distance between the self terminating "F" adapter and splitter 8.5 feet.
The core balance CT interface ACE990 is used to match the measurement of an existing MV core balance CT with ratio 1/n (50=< n =< 1500) with that interface connected to the residual current input of Sepam 1000+.
Re-published to revised security level: 17 June 2008 by DRM
Applies To: Sepam 1000+ (Sepam Series 20 and Sepam Series 40)
All content © 1992-2008 Schneider Electric
Legacy KB System (APS) Data: RESL166633 V2.0, Originally authored by LaVI on 06/20/2008, Last Edited by DaMi on 06/20/2008
Related ranges: Sepam series 40, ACE 9XX, Sepam series 20
Issue: Unable to input the primary or secondary voltage transformer ratio into VAMP321 Arc Flash Mitigation relay using the VAMPSet software
Resolution: By default the VT or PT is set to Uo which is for a residual voltage measurement. If a line to neutral or line to line VT is being used, the Voltage measurement mode (available in the SCALING section) must be set to 1LN or 1LL, this change must then be loaded into the VAMP321. Once this is complete you must refresh the view from the device to open the VT primary and VT secondary options. Enter th correct VT ratio and send this change to the VAMP321.
Not available in NZ rewire with 56 series
Plate size: 66mm diameter
Mounting Centres: 50mm
Rated at 230V - 240V a.c. 16A resistive, 16A inductive 8AX fluorescent
The RCD itself has a max rating of 16A. However this product only comes with 10A rated plug and socket attached.
Yes - the standard saturn mechs (60PB) are rated at 16AX/20A
CCT15838 - Prog. time switch 16A IHPplus 1C 18 mm. This only has 1 N/O contact.
The alternative Acti 9 conversion is the A9F45316 3 Pole 16A 6kA MCB
No. - The 56 Series plugs only come with 16A or 20A 7 pin plug, as do the sockets.
Yes, the part number for a 3 position marked "1, 0, 2" 2 pole cam switch 16A is a 7GN12/52/U.
Rotary Cam Switches and Accessories, Rated Thermal Current (Ith) = 12A AC23A rating - 6kW at 415V. Rated Insulation Voltage Ui = 480V. Maximum 16A Fuse (gG/gL) for 3kA short circuit protection, 2 Pole 12A 60° changeover switch with Off marked 1-O-2.
Some of the key features are:
- Front mounting
- AC23A Rating
- Changeover switch with OFF marked 1-O-2
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=7GN12/52/U
The Acti9 A9F44216 is a 2p 16A C curve 6kA MCB.
6A - A9FDB606
10A - A9FDB610
16A - A9FDB616
20A - A9FDB620
25A - A9FDB625