Quantcast

Single Switched Socket Vertical Mount 10A Neon

White Electric | Single Switched Socket Vertical Mount 10A Neon

Single Switched Socket Vertical Mount 10A Neon

Item Number: 15VN-WE

Retail
$150.69
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Range of product

Standard Series

Surface finish

glossy

Physical

Control type

ON/OFF button

Number of gangs

1 gang

Pin number

3

Number of power socket outlets

1

Actuator

  • rocker
  • switch
    • Mounting position

      vertical

      Fixing mode

      by screws

      Local signalling

      indicator light

      [Ue] rated operational voltage

      250 V AC

      [In] rated current

      10 A

      Depth

      14 mm

      Length

      115 mm

      Width

      73 mm

      Fixing center

      84 mm

      Standards

    • AS/NZS 3100
    • AS/NZS 3112
    • AS/NZS 3133
    • AS/NZS 3000:approval number S/1
      • Material

        Material

        PC (polycarbonate)

        Others

        Package 1 Weight

        0.001 kg

        Package 1 Height

        14 mm

        Package 1 width

        73 mm

        Package 1 Length

        115 mm
        Show all specifications

        Frequently Asked Questions

        hide show

        What is the inrush current of a LC1D40U7 Contactor?

        It is 160VA inrush and 15VA sealed at 50HZ for the LC1D40U7 Contactor.
        For more information see data sheet https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=lc1d40u7

        How does the shield connection of the comm port on ION8600/8650 connect to earth ground?

        Product Line:  
        ION8600 / ION8650

        Resolution:  
        The RS485 shield is connected to earth ground through a 120ohm resistor.  The RS232 shield is connected to earth ground through a 15V sidactor, 1Mohm resistor, and a 1nF capacitor.

        Communication Gateway - What pins are what on the RS485 (Modbus) Terminal Block? (eg. Rx+, Rx-, Tx+ and correct orientation)

        Pin 1 - 15V input
        Pin 2 - Ground
        Pin 3 - RS485 A
        Pin 4 - RS485 B
         
        RS485 is a bidirectional differential bus so there is no transmit and receive. Pin 1 is on the right when looking at the connector. See attached diagram.
         

        How to power a Xantrex System Control Panel when no XW+ or SW is present?

        When using a Xantrex System Control Panel, this unit is powered from either an XW+ or an SW hybrid inverter.

        When in a situation that either one of these hybrid inverters are not available, to get the SCP to operate, you will need to provide an independant 15V DC 200mA supply to the Xanbus network.

        +ve should be connected straight to pins 1,2 and 7. -ve should be connected to 3, 6 and 8.

        My customer have a Siemens motor nr: 1PH7 107-xxFxx-x The encoder on this motor is of the type HTL-signal, 15VDC. Do we have any encodercard that supp...

        Goals and Symptoms

        My customer have a Siemens motor nr: 1PH7 107-xxFxx-x The encoder on this motor is of the type HTL-signal, 15VDC. Do we have any encoder card that support this kind of encoder "HTL signal" for the ATV71?

        Causes and Fixes

        The HTL is a type of Push Pull, then VW3A3405 or 06 or 07 option board depend the alimentation, can work without any problem on the HTL encoder. So be carreful you have to verrify the current consomation of your encoder in accordance to 175ma maximum up to 15V and 100ma up to 24V. Or you can add a external alimentation.

        In the ATV71 catalogue the low level is < 1,5V, not compatible with HTL but this value is false, in reality we guarantee a low level <3V, 100% compatible with HTL technologie <2,8V.


        Legacy KB System (APS) Data: RESL176046 V1.0, Originally authored by on , Last Edited by GiVa on 11/07/2006
        Related ranges: Altivar 71

        What is the minimum ring Voltage the ION8650 modem can detect?

        Issue
        What is the minimum ring Voltage the ION8650 modem can detect?

        Product Line
        ION8650
        ION8600

        Environment
        Modem communications

        Resolution
        The vendor specification for RING detection use the frequency range from 15Hz to 68Hz and a DC offset of 35V and above with up to 100V RMS RING. This range covers 99.99% of all real world ring scenarios and there are no approval agencies that we are aware of that are outside of that range. Normal ring offset is usually 37V to 48V DC with a ring voltage less than 100V RMS.

        We have tested 15V RMS and have been able to detect RING, but the test equipment was generating a perfect 20 Hz sine wave for TIP and RING and they are opposite of each other. Not every provided TIP/RING signal will be perfect (or even a sine wave) so that would change the actual RING detect voltage. Firmware version 1.02u was tested at 14 Hz and tested to 20 V and 68 Hz tested to 19 V.