socket swt twin dp 10a 250v

Twin Switch Socket Outlet, 250V, 10A, Standard Size, Vertical, Two Piece Base

Catalogue Number: 15D2V
socket swt twin dp 10a 250v
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart


hide show
Product brand
Range of product
Standard Series
Control type
ON/OFF button
Number of gangs
2 gangs
Pin number
Number of power socket outlets
  • rocker
  • switch
    • Mounting position
      Fixing mode
      by screws
      Local signalling
      without light indicator
      PC (polycarbonate)
      Surface finish
      [Ue] rated operational voltage
      250 V AC
      [In] rated current
      10 A
      14 mm
      115 mm
      73 mm
      Fixing center
      97 mm
    • AS/NZS 3100
    • AS/NZS 3112
    • AS/NZS 3133
    • AS/NZS 3000:approval number S/1
      • Sustainable offer status
        Green Premium product
        EU RoHS Directive
        Mercury free
        RoHS exemption information
        China RoHS Regulation
        Product out of China RoHS scope. Substance declaration for your information
        Environmental Disclosure
        Circularity Profile

        Documents & downloads

        hide show
        Filter items
        • All

        • Product Brochures

        • CAD Files and Packs

        • Technical Data Catalogues

        • Installation Instruction

        • Product Environmental

        • Specifications

        • Case Studies

        • Certificates (MSDS)

        Frequently Asked Questions

        hide show

        Is the 15DD2V still available?

        No, unfortunately the 15DD2V is no longer available. The closest alternitive is the 15D2V.

        Some of the key features are:
        • 2 pole
        • Standard size
        • Vertical
        • Two piece base
        For further information please visit


        What is the replacement for Merlin Gerin 15322 ?


        Does the 15725 have daylight savings function

        15725 has been superceded by CCT15837
        CCT15837 has NZ listed for daylight saving

        What is the Replacement Acti9 code for the Merlin Gerin 15322 din rail mounted buzzer?

        Are there instructions for 15724 Timer?

        Told Yes

        For the 15725 programmable timer what is the battery that fits into it?

        CR2032 battery

        What is the part code for a pulse relay 16Amp 2P 240V ac coil voltage

        Use a 15520

        How is it possible to determine if an Enercept Meter is the Basic or Enhanced model?

        A System ID register located at addresses 30 (Integer) and 315 (Float) exists within the Enercept Meter. Reading that register will yield one of two values:
        A value of 15022 will be returned from the Enhanced Enercept model.
        A value of 15023 will be returned from the Basic Enercept model.

        Are there any instructions for a 15724 timer?

         Yes, there is an instruction sheet for the 15724 timer.

        For further information please view the attached document.


        What is the alternative safety transformer part code for the Merlin Gerin 15222?

        Part number 15222 is no longer available the alternative is the A9A15222.
        Please use link for Data sheet:

        What is the current replacement for the 15725

        The part number is the CCT15838 the main difference is this has N/O contacts and the 15725 had C/O contacts.
        (See attached data sheet)

        What is the part code for a 240 to 24V 100VA transformer

        The largest transformer that we have is 63VA - The part code is 15222

        What is part number for mounting clip to suit 25/2V?

        The part number for mounting clip is a 154/2.

        Are there double GPO's that are individually wired on each side?

        Yes, there are a few GPO's that are individually wired, they are C2016/2, 16/2MF, 2015/2V and 15/2V. In a weather proof option we have the WSC227/1/2

        Will 25/2V double outlet, large size, vertical fit on 155P2 plaster bracket?

        Yes, 25/2V will fit on 155P2. 25/2V is  Large Size Format 115 x 115mm, Double Power Outlet rated to 250V 10A.
        For further information please visit:
        User-added image

        155P2 is a large plaster mounting bracket with 84mm mounting centre. For further information please visit:
        User-added image

        What is the part number of the mounting block to suit 25/2V Standard range, double socket outlet, large size format 115 x 115mm?

        448SD and 448 are the mounting blocks to suit 25/2V, Standard range, double socket outlet, large size format 115 x 115mm.  Dimensions of the mounting block are as follows:

        For further information , please visit
        User-added image
        User-added image

        How to update the HMIG3U Vijeo Designer runtime to XD runtime?

        How to update the HMIG3U Vijeo Designer runtime to XD runtime?

        Product Line:
        HMIGTU, Vijeo XD, Vijeo Designer



        To update the HMIG3U runtime from Vijeo Designer to Vijeo XD simply by downloading to the target with Vijeo XD over the USB media connection.   The initial download to update the runtime will take 15-20 minutes to complete.

        How to check all interconnected smoke alarms operate correctly? (Mixed wired and Wireless Interconnection applications)

        • Press the test button on each interconnected smoke alarm, (one at a time) for 15-20 seconds.
        • The smoke alarm itself will sound first within 5 seconds, then ALL other interconnected smoke alarms should sound their alarm within another 15 seconds. (You may need someone’s help to check all other interconnected smoke alarms do sound).
        • Make sure to repeat the test from all the other interconnected smoke alarms. If any alarms do not sound, please follow the attached file “Detailed testing process” for more checks.
        • If all alarms operate when checked from all locations, then your smoke alarm system is working properly.

        ADVC Controller Test and Training Set does not show the correct series

        When the test and training set (TTS) is connected to the ADVC Controller it is showing a U-Series Recloser instead of a N-Series Recloser.

        Product Line   
        ADVC II, Recloser, U-Series, N-Series, and W-Series

        Testing the Recloser settings.

        The old calibration files took the form of the first Recloser series that the TTS connects to.  The series cannot be changed after that.

        In order to have the TTS have the ability to switch between series the calibration file needs to be N24-150s (24kV 150kV BIL 1A CT's).
        Attached is the calibration file, instructions on how to check the calibration file and how to load the file, and application notes about the calibration file.

        Note:  The firmware of the ADVC Controller firmware must be A45-11.01 or above.

        Changing the Language of the Symmetra PowerView RM Display


        I need to change the language displayed by my PowerView RM display interface

        Product Line

        Symmetra Power Array
        Symmetra RM
        Symmetra LX
        Symmetra PX
        Smart-UPS VT
        Smart-UPS RT 15/20 kVA
        PowerView display interface


        All serial ranges


        The display defaults to using the English language.  The user may opt to display the information in a different language.


        You can change the language by downloading new firmware into the PowerView RM interface. French, German, Italian, and Spanish are available on the enclosed CD. Support for additional languages may be available on the CD or at the APC Web site ( Product documentation in these languages also appears on the CD or at the APC Web site.  To change the language of the interface, perform the following steps in the order given.

        1. Disconnect the PowerView RM from the UPS.

        2. Disconnect the data cable from the RJ-45 port of the PowerView RM.

        3. Connect the programming cable (included, APC part number 940-0082) between PowerView RM and the UPS data cable:
        a. Attach the RJ-45 connector to the port on the rear of the PowerView RM interface.
        b. Connect the female DB-9 connector of the programming cable to a serial port on the computer. The downloading computer must have access either to the file on the CD provided with PowerView RM or to the APC Web site.
        c. Attach the UPS data cable to the female RJ-45 connector on the programming cable.

        4. Locate the language program file to be downloaded into PowerView RM. Each language program file appears on the CD under the folder of its language(Français, Español, etc.) with a .bin extension. Program files for additional language support or code updates may be available on the APC Web site.

        5. Place the PowerView interface in programming mode by pressing simultaneously the three keys on the right (Escape, Help, and Enter) for about three seconds, until the interface emits a long beep. The LCD will display the Programming screen. To leave the Programming screen before starting a file transfer (step 6), press Esc until it beeps (about one second).

        6. Start HyperTerminal or another terminal emulation program on the computer. Set the communication parameters to 8 bits, no parity, no flow control, 1 stop bit, and 19,200 bps. After establishing a connection, use the Xmodem protocol to transfer the language program file from the CD or your download folder to PowerView RM. When the file transfer is complete, the PowerView RM interface will reset itself and display the Startup screen in the new language. If the file transfer fails, the interface will reset itself. Retry the file transfer by repeating steps 5 and 6.

        7. Quit the terminal session. Disconnect the programming cable and reconnect the UPS data cable to the PowerView RM RJ-45 port.

        8. Affix the PowerView RM to the UPS.

        Which wall box suits the large size, twin socket outlet 25/2V?

        The wall box that suits the large size, twin socket outlet 25/2V is 257D2-GY.
        Its key features are:
        • 2 gang
        • 84 mm x 46 mm mounting center
        • Suits universal wall construction
        • With 20 mm cut-outs one end and 25 mm cut-outs at other, impact resistant, deep-type
        For further information please visit