box wall miniature ba series

Special Wall Boxes Metal, Miniature Box to Suit 1 Gang Architrave Switches

Catalogue Number: 158
box wall miniature ba series
RRP (Inc. GST)


hide show
Range of product
Miniature BA Series
Product brand
Number of gangs
1 gang
Cable entry number
Surface treatment
67 mm
28 mm
32 mm
Location of connection
Package 1 Weight
0.07 kg
Sustainable offer status
Green Premium product
REACh free of SVHC
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Mercury free
RoHS exemption information
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure

Documents & downloads

hide show
Filter items
  • All

  • Product Environmental

  • Specifications

Frequently Asked Questions

hide show

What are the dimensions of the 535 power tower

 Dimensions 158 x 158 x 140mm high

Whats are the dimensions of the T200, T200FA, T200F, T200X, T200L, T200S

 210 x 158 x 112mm (L x D x W) 

Whats the dimensions for a T300, T300L, T300S

 210 x 158 x 117mm (L x W x D)

LC1D1506 What are the dimensions? Weight?

Height 158 mm
Width 120 mm
Depth 136 mm
Product weight 2.5 kg

Is the Modicon M340 platform rated for extended temperature ?

There is a model of M340 built for harsh environments. It offers an extended temperature range of   (-13 to 158 F) 
In order to obtain this extended temperature capability the M340 part number requires an "H" suffix. For example:  BMXP342020H.

Legacy KB System (APS) Data: RESL186036 V1.0, Originally authored by DaSo on 07/02/2007, Last Edited by DaSo on 07/02/2007
Related ranges: Modicon M340

Do SEPAM relays support IEEE 1588 time synchronization

User needs to accept IEEE 1588 as time synchronization

Product Line
SEPAM series 20, 40, 80

Time synchronization

SEPAM relays do not natively accept IEEE 1588 as time synchronization
A third-party converter that facilitates IEEE 1588 time synchronization can be found at the following link:

Do you have a 4 pole normally closed 159 Series contactor?

Unfortunately the 4 pole normally closed 159 Series contactor was a part of the Square D brand and has been discontinued.

What is the 154 that suits the Slimline range?

The 154 to suit the Slimline range is the 154RM.

Why the second output of the module TMC4AQ2 is not working in current mode?

Products TMC4AQ2 with date code lower than 1528 and larger than 1423 have a calibration issue only in current mode of the second output.
Anyway you can use the second output in voltage mode and the first output in current or voltage mode. 

If you need to configure the 2 outputs in current mode please contact your near Schneider Electric vendor.
You can find the date code in serial number that is located at the left side of the cartridge module:   

For example:

SN: 8B 1508 0028637T    ; 3th to 6th digit corresponds to the date code: 1508

What is the standard key used in a 9001KX,9001KR, 9001KS and 9001SKS selector switch?

Replacement standard key for the 9001 oeprators.

Product Line:
Harmony Pushbuttons

All Products

The standard key is the E10 key which is catalog number 2941101100.

What is the width and height of the PDL 675HRCD

145 x 118

What temperature causes the ATS48 to have the Over Heating Fault (OHF) state?

What can cause an Over Heating Fault (OHF) state on ATS48?

Product Line:
ATS48 series soft starters.

All models, All serial numbers.

fault condition

OHF is triggered in the ATS48 series starters when the heat sink temperature rises above 95 degrees Centigrade (203 degrees Fahrenheit).

Procedures for remedy
* Check the mechanism (wear, mechanical play, lubrication, blockages, etc.).
* Check the sizing of the starter-motor in relation to the mechanical requirement.
* Check the operation of the fan (if the ATS48 used has one), ensuring that the air passage is not obstructed in any way and the heat sink is clean. Ensure that the mounting recommendations are observed.
* Wait for the ATS48 to cool before restarting.

If the temperature is too cold below the Soft starter's environmental specifications, it will trip on OHF.
For open type ATS48 the temperature ranges are:
For Operation:  
14 to +104*F (-10*C to +40*C) without derating
Up to +140 *F (+60 *C), derate the current by 2% for each *C above 40 *C
14 to 122 *F (-10*C to +50 *C) with user provided shorting/bypass contactor.
For Storage:  -13 to +158 *F (-25 to +70 *C)

For the enclosed units the temperature ranges are:
For Operation:
Ambient conditions in installed area from 0 to 40 *C, 32 to 104 *F (Type 1 and 12); 0 to 50 *C, 32 to 122 *F (Type 3R)
For Storage: -25 to +70 *C, -13 to 158 *F
Show More