No. Unfortunately,there is no blank plate available for 16/2.
Part number 156/2 can be used on all Prestige large format plates.
No, unfortunately the mounting block to suit 16/2 is not available for for the skirting mout double power point.
For further inforation on our product range please visit https://www.clipsal.com/Trade
The part number for the wall clip suitable for large format Prestige P2000 plaes is 154/2.
The 154/2 is the clip to suit any Prestige large format plate 115mm x 115mm
Standard 2 gang flush box will suit - part number 157/2
The part code for the fuse carrier is 15668
Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm
The C2016/2 is independantly fed where for the outlets on the 16/2 are fed from the same supply. see attachments
Yes part number 56/32 can be pad lockable.
The separator part code is 27001
Dimensions for part number 157/1 is a 94mm x 54mm x 39mm.
The mains switch is 15092
The part number for the wall box is 164/2
The part code is A9C30211
No. Unfortunately, part number is not available as single.
Part number 15222 is no longer available the alternative is the A9A15222.
Please use link for Data sheet:
The largest transformer that we have is 63VA - The part code is 15222
No unfortunately we dont make that part you would need to place a 30P to fill one of the holes.
The dimensions of a 157/2F fire rated wall box is 94mm(H) X 97mm(W) X 47mm(D).
The c clip that suits the P2033/2 switch is the 154/2.
Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.
The gasket supplied with the 157/2F is used to achieve the acoustic and fire rating.
Some of the key features are:
- Easy access for cables and conduits
- Suitable for virtually any fire rated application
- Sound transmission rating for virtually any application
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/2F
408/3 has 84mm mounting centres so can be mounted on standard clipsal flush box like the 157/1 for example.
Yes, we do have a wall box spacer for the 157/1PRM wall box. The part number is SL2000WBS.
All of the station communication settings can be configured and viewed from the local display. These can be found by logging in:
-> Main Menu -> 1.6 System Settings -> 1.6.2 Modbus Slave Address -> 1.6.3 RTU IP Address -> 1.6.5 Port 3 Config -> 1.6.6 DNP3 Address -> 1.6.7 Modbus/TCP Server
Yes the part number for the longer screws is a 355A. They are 50mm long apposed to the 355 which is 32mm long. Both screws are M3.5 X 0.8 Pitch.