Frequently Asked Questions
Yes it fits all BP series Bare links.
How to read a LXM32 drive ramp (ACC, DEC) using SoMachine?
To read the drive ramp values (ACC, DEC), you can use the function block "MC_ReadParameter".
This function block requires the modbus address of the parameter in the input "Address".
ParameterNumber must be set to 1000 (Default value).
1556 = RAMP_v_acc
1558 = RAMP_v_dec
Using GetAttributeSingle would also work. In this case, the CIP address should be used (can be found in the LXM32M manual).
CIP 106.1.10 = RAMP_v_acc
CIP 106.1.11 = 1558 = RAMP_v_dec
When is a neutral CT required?
A neutral CT is only required when there are loads that produce neutral current.
A neutral CT is required when an electronic-trip circuit breaker has a ground-fault option (alarm or trip) and is used on a 4 wire system. Neutral current must be factored in with phase current for accurate sensing.
A neutral CT is also required for the GFM modules when used on a 4-wire system.
CTA-ID : 1559
The larges is Actassi 155 x 55 part code ISM11400
PDL56DOL12LOBGY - less overload
available on page 155 Pocket book PDL 2014