Frequently Asked Questions
How to read a LXM32 drive ramp (ACC, DEC) using SoMachine?
To read the drive ramp values (ACC, DEC), you can use the function block "MC_ReadParameter".
This function block requires the modbus address of the parameter in the input "Address".
ParameterNumber must be set to 1000 (Default value).
1556 = RAMP_v_acc
1558 = RAMP_v_dec
Using GetAttributeSingle would also work. In this case, the CIP address should be used (can be found in the LXM32M manual).
CIP 106.1.10 = RAMP_v_acc
CIP 106.1.11 = 1558 = RAMP_v_dec
The ``3`` form for spring terminals is available on 65A and below IEC contactors. On the 40, 50 and 65 amp devices the spring terminals are on the control circuit only. It is not available on 80A, 115A or 150A D Line contactors.
CTA-ID : 2053331