bracket mtg sliding nuts

Mounting Accessories Metal Bracket, Horizontal With Sliding Nuts

Catalogue Number: 155A
bracket mtg sliding nuts
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Product or component type
bracket
Accessory / separate part category
mounting accessory
Shape
rectangular
Fixing center
84 mm
Depth
37 mm
Length
135 mm
Width
72 mm
Material
metal
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What is part number for Optiline 70 skirting duct 155x 55?

The part number for Optiline 70 skirting duct 155x 55 is a - ISM11450

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=ISM11450


User-added image

Read a LXM32 drive ramp (ACC, DEC) using SoMachine

Issue:
How to read a LXM32 drive ramp (ACC, DEC) using SoMachine?

Product Line:
Lexium 32

Resolution:
To read the drive ramp values (ACC, DEC), you can use the function block "MC_ReadParameter".
This function block requires the modbus address of the parameter in the input "Address".
ParameterNumber must be set to 1000 (Default value).
1556 = RAMP_v_acc
1558 = RAMP_v_dec

Using GetAttributeSingle would also work. In this case, the CIP address should be used (can be found in the LXM32M manual).
CIP 106.1.10 = RAMP_v_acc
CIP 106.1.11 = 1558 = RAMP_v_dec

What is part number for 165A with seven holes neutral link?

The part number for 165A with seven holes neutral link 165/7.

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=BP165/7

User-added image

What is the largest amperage D Line IEC contactor that can accomodate spring terminals, using a ``3`` after the amperage in the part number, such as an LC1D123G7?

The ``3`` form for spring terminals is available on 65A and below IEC contactors. On the 40, 50 and 65 amp devices the spring terminals are on the control circuit only. It is not available on 80A, 115A or 150A D Line contactors.


CTA-ID : 2053331

What is the part code for a Circuit breakers 125A, 2P, 15Ka

 The part code is 18459

What is the part number for a 3 phase 63amp , 15kA C/B?

The part number for a 3 phase 63amp, 15kA C/B is - A9N18467
For further information, visit the link below:-
https://www.schneider-electric.com.au/en/search/A9N18364

What is the part number for a 3 pole 63amp 15kA C/B?

The part number for a 3 pole 63amp 15kA C/B is - A9N18467

For further information visit link below:-
https://www.schneider-electric.com.au/en/search/A9N18467
User-added image

What is the motor trip unit needed for a LV430403 frame, 150A

Use a LV430500

What is the minimum adjustment of the LV431630?

The minimum adjustment of the LV431630 is 175A.

The range is 175A to 250A.

Input Circuit Breaker Requirements for Symmetra PX 20/40/80 kw


Issue:
This document describes the required input over current protection (circuit breaker) required when installing a Symmetra PX

 
Product line:
Symmetra PX1 Products


Environment:

All models/ all serial numbers

Cause:
Input Circuit Breaker Requirements for Symmetra PX 20/40/80 kw

Resolution:
ISX 20K (All-in-One)
90A 208vac

Symmetra PX 40
175A 208vac
80A 480vac (PDU w/ Step Down Transformer required)
60A 600vac (PDU w/ Step Down Transformer required)

Symmetra PX 80
350A 208vac
150A 480vac (PDU w/ Step Down Transformer required)
125A 600vac (PDU w/ Step Down Transformer required)


For more information about this subject please refer to Application Notes 148, 149, and  150. (APC Symmetra PX Frame Installation Deviation and Selection of Input Circuit Breaker Ratings)

App note 150
https://www.apc.com/salestools/AWAR-7KEP2T/AWAR-7KEP2T_R0_EN.pdf
 
App note 149
https://www.apc.com/salestools/AWAR-7KEPUW/AWAR-7KEPUW_R0_EN.pdf
 
App note 148
https://www.apc.com/salestools/AWAR-7KEQPR/AWAR-7KEQPR_R0_EN.pdf

What is the part code for a 125A 3 Phase Socket

Not available in NZ

What is the part number for Wilco 3 pole 125A switch?

The part number for Wilco 3 pole 125A switch is WMS3125

Please click this link for further information
https://www.clipsal.com/Trade/Products/ProductDetail?catno=WMS3125

User-added image

What is the part number an C120H 4 pole 100amp 15kA B-Curve C/B?

The part number a C120H 4 pole 100amp 15kA B-Curve C/B is - A9N18435

For further information, visit the link below:-
https://www.schneider-electric.com.au/en/search/A9N18435
User-added image

 

What is the part number for a 6 hole 165A earth bar?

The part number for a 6 hole 165A earth bar is BP165C6.

Some of the key features are:
  • 3/8 inch hexagon head bolt
  • 1 stud to suit cable lug
  • 6 tunnel -2 screw

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=BP165C6
 

 

What would the breaking capacity be on a 25801 C60N 6A 1p breaker if used with 24V dc

The breaking capacity is 15kA

What are the recommended fuses for the Connexium TSCESM switches?

Goals and Symptoms

What are the recommended fuses for the Connexium TSCESM switches?

Causes and Fixes

TCSESM04xx 1,5A Slow/delay fuse
TCSESM08xx 1,5A Slow/delay fuse
TCSESM10xx 2,0A Slow/delay fuse
TCSESM16xx 2,0A Slow/delay fuse
TCSESM24xx 3,0A Slow/delay fuse


Legacy KB System (APS) Data: RESL192124 V1.0, Originally authored by PeZa on 06/12/2008, Last Edited by PeZa on 06/12/2008
Related ranges: ConneXium - Ethernet

What is the part number for a 150A 3 pole back wired main switch?

The part number for a 150A 3 pole back wired main switch is T150.

Some of the key features are:
  • Back wiring

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=T150




 

What is the part code for a din rail mounted isolator, 3P 150A

 You can use a 28912

What is the inrush current of a LC1D40U7 Contactor?

It is 160VA inrush and 15VA sealed at 50HZ for the LC1D40U7 Contactor.
For more information see data sheet https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=lc1d40u7

What is the part code for a 56 series 5 pin 125A plug

 PDL 5 pin plugs go up to 50A only

Do we have any 120 - 130A solid-state relays with a 24V DC control

 Yes - the SSRPCDS125A3 is 125A with control of 4-32V DC

Extended front rotary handle for the 28910 INS 125A Load Break Switch ?

Code = LV428941

What is the code for a 3 olep 125A D curve MCB ?


Acti 9 Code = A9N18514 

What is the part number for a 4 pole, 30mA, 125A RCCB?

The part number is 16924.

Does Schneider have 3 pole, 80A, 6KA MCB?

Schneider only offers 10KA & 15KA for 80A, 3 Pole MCB (each pole = 27mm)
 

When is a neutral CT required?

Issue:
When is a neutral CT required?

Product Line:

Environment:

Cause:


Resolution:
A neutral CT is only required when there are loads that produce neutral current.
A neutral CT is required when an electronic-trip circuit breaker has a ground-fault option (alarm or trip) and is used on a 4 wire system. Neutral current must be factored in with phase current for accurate sensing.
A neutral CT is also required for the GFM modules when used on a 4-wire system.


CTA-ID : 1559

Can C-Bus operate 0-10V light fittings

Yes, it requires a L5504AMP, and must be used in conjunction with a C-Bus system and can dim 0-10V or 1-10V ballasts.

Output Rating - Sinking: 15mA at Vout = 0V, 8mA at Vout = 10V, i.e. I = 15-(0.7*Vout)mA
Output Rating - Sourcing: 2.5mA (i.e. minimum of 4kΩ)

NetBotz v3 | Camera POD 160A appears to not function properly

Issue:
Why does the Camera POD 160A appear to not work with the NetBotz appliance it is connected to?

Product Line:
NetBotz v3 Wall Appliance: 455/456 (NBWL0455/6)
NetBotz v3 Rack Appliance: 450/451 (NBRK0450/1), 550 (NBRK0550), & 570 (NBRK0570)
NetBotz v3 Accessories: Camera POD 160A (NBPD0160A)

Environment:
NetBotz v3 (firmware below 4.6.2)
NetBotz Camera POD 160A

Cause:
Newer NetBotz Camera Pods (NBPD0160A) are running a hardware revision that are not compatible with older NetBotz firmware. This causes the camera to appear failed and not register on the main NetBotz unit. 

Resolution:

Updating the NetBotz appliance to firmware version 4.6.2 or later will correct the problem.  If you have upgraded or are already running 4.6.2 or later and are still experiencing difficulties, contact technical support.
Please note that this could also happen on a NetBotz 355A or 455A with the on-board camera with firmware prior to 4.6.2..

Verifying NetBotz Appliance Firmware Revision

1) Log into the NetBotz appliance using the Advanced View application.
NOTE: For instructions on downloading Advanced View, see knowledge base FA230223.

2) Select the About tab.

3) The firmware revision will be listed in the Bootstrap Version field.


Upgrade NetBotz Appliance Firmware

Instructions on upgrading a NetBotz appliance firmware can be found within knowledge base FA158254.

 

Is there available a 160A 3p mcb the same depth as a C120

 No - for 160 , will need to use NSX160, depth = 126mm
MCB maximum size 125A

What is the code for a 4pole 125A contactor with 240V coil

The part code is LC1D80004U7.
This has 4 N/O main poles

Can you wire R2 relay on the ATV28 drive to a 115Vac light?

Issue:   Can you wire R2 relay on the ATV28 drive to a 115Vac light?
 
Product Line:   ATV28
 
Environment:  All
 
Cause:   N/A
 
Resolution:   Yes. The R2 relay contacts are rated for 1.5A 250Vac and 30Vdc.


 

Does the 150A IEC contactor LC1D150BD with a 24 volt DC coil have a coil suppressor built in?

Issue: 
Does the LC1D150 with a DC coil include suppression? 

Product Line:
 Tesys D line contactors and accessories

Environment:
Products sold and used in the United States
 
Cause:
 Identifying components and accessories
 
Resolution:
 
Yes. Suppression is built into the 150A DC contactor coil.
 

What is the largest trunking we do in NZ

 The larges is Actassi 155 x 55 part code ISM11400


Is the PDL 695X available in 15A version?

No, we have no 15A sockets available with an extra switch.

What version of Colour Touchscreen do i have?

You can confirm the version of the Colour Touchscreen you have by checking the pin configuration on the Colour Touchscreen's power supply

5000CTC V1 - 50xxCTC -  4 pin power supply - 5000CTCPS - 5VDC 30W 1.5A 90-264VAC 50/60Hz
5000CTC V2 - 50xxCTC2 - 7 pin power supply - 5000CTCPS/2 - 5VDC 30W 1.5A 90-264VAC 50/60Hz
5000CTC V3 - 50xxCTC3 - 2 pin power supply (green phoenix connectors) - 5100P24/2700AU - 24VDC 65W 2.7A 100-240VAC 50/60Hz

What is a 3P 50kA MCCB with 125A trip unit and vigi block, would also need a 125Amp RCBO

Use a LV430406 - 160Amp frame + LV430431 125Amp trip unit + LV429211 Vigi module + LV431536 connector = 125Amp RCBO

What is the replacement for 18354, 4P pole , B curve, 100A, 10KA circuit breaker?

We do not have a direct replacement for 18354. We have A9N18436 which is rated to 15KA.  A9N18436 is 4P pole , B curve, 100A, 15KA circuit breaker.
For further information, please visit https://www.schneider-electric.com/en/product/A9N18436/c120h---circuit-breaker---4p---100a---b-curve/

 

What size bolt is in the BP165C6?

The BP165C6 has a 3/8" Hexagon head bolt for up to 165A cable lug.

Some of the key features are:
  • 1 stud to suit cable lug
  • 1 tunnel for M.E.N.
  • 5.8 mm diameter Tunnel
  • 6 tunnel -2 screw
For further information please visit https://www.clipsal.com/Trade/search-results?q=BP165C6


 

What are the contact ratings of standard XB4/XB5 (ie. ZBE101 ) contact blocks?

Issue:
Need to know the contact rating for the contact blocks

Product Line:
22mm Push Buttons

Environment:
XB4/XB5 22mm Push Buttons
                                              
Resolution:                                                                 
The contacts are rated NEMA A600. The maximum AC voltage is 600VAC and the maximum thermal current is 10 amps. Break ratings however are 1.2a at 600v, 3a at 240v and 6a at 120v .They are also rated NEMA Q600. The maximum DC voltage is 600VDC and the maximum thermal current is 2.5 amps. Break ratings are .1a at 600vdc , .27a at 250vdc and .55a at 125vdc

What is the part number for a contact rebuild kit on a LC1FF43?

Issue:
Needs the part number for a contact rebuild kit on a LC1FF43.

Product Line:
Telemecanique Legacy F-Line Starters

Environment:
IEC Contactors and Starters

Cause:
These devices are still in use and may occesionally need to have contacts replaced

Resolution:
LA5FF431 is a three pole contact rebuild kit for the LC1FF43

What is the part number for a PDL DOL Starter 240V 5.5Kw

PDL56DOL12LOBGY - less overload
available on page 155 Pocket book PDL 2014

What is part number for skirting socket 15A and 10A?

The part number for skirting socket 15A and 10A is 16/2MF1510 -WE

Can I use a 15A socket with a 10A plug?

Yes, a 15A socket with a 10A plug will fit.

What 15A extension socket has a shroud?

The 15A extension socket that has a shroud is the 438S15.

Is there a double pole 15A outlet?

Yes, the part number is a 2015D15

Installation Issues with Symmetra LX & 100A Supply

"

Symmetra LX is a redundant on-line double conversion UPS. Each Symmetra Power Module is rated at 4 KVA so when the Symmetra LX is fully populated with 5 power modules, it can draw up to16 KVA from the utility as one power module is redundant. This unit can be used either as a single phase or as a 3 phase unit, without any adjustments or changes being made to system to achieve this.

The Symmetra LX will operate at a voltage of 155 V to 276V , therefore it should draw a current of about 100A at 155V on a full load of 16KVA. Most European regulations require a 35 sq. mm cable for a 100A load but the Symmetra LX connectors will only take a maximum of 25 sq. mm.

However if we look at the power supply in most European countries, the voltage range is 230V - 240V and a voltage of under 200V would be very unusual. Taking a voltage of 240V and running the unit on full load the current would be just over the 65A, with 230V it would still be under 70A and we can drop the down to 200V before reaching 80A. The Symmetra LX should be protected by a slow blow Fuse / MCB which would need a sustained overload of over 1.2 times the rated current for about 2 hours to trip the Fuse / MCB, so even if the voltage drops below 200V the extra current shouldn't cause any problem.

In an area where a reasonably stable voltage exists there is no problem in using 25 sq. mm with an 80A fuse / MCB. Even with substantial voltage drops there is no danger of cables overheating or fuses blowing. In cases where the cable runs are very long and the regulations specify 35 sq. mm cable, the 35 sq. mm cable can be brought to the isolator adjacent to the unit and a 25 sq. mm cable can be used between isolator switch and UPS.

"

What are the Colour Touchscreen power supply availability or characteristics?

This will depend on what version of the Colour Touchscreen - 5000CTC Series.

First confirm the version of the Colour Touchscreen you have by checking the pin configuration on the Colour Touchscreen's power supply

5000CTC V1 - 50xxCTC -  4 pin power supply - 5000CTCPS - 5VDC 30W 1.5A 90-264VAC 50/60Hz - NO LONGER AVAILABLE
5000CTC V2 - 50xxCTC2 - 7 pin power supply - 5000CTCPS/2 - 5VDC 30W 1.5A 90-264VAC 50/60Hz - NO LONGER AVAILABLE
5000CTC V3 - 50xxCTC3 - 2 pin power supply (green phoenix connectors) - 5100P24/2700AU - 24VDC 65W 2.7A 100-240VAC 50/60Hz - AVAILABLE

Note: The 5000CTC3 power supply 5100P24/2700AU cannot be used for older versions of the 6.4 inch Colour Touchscreen

What is the part number for the 1 Pole 80 Amps C Curve 15KA Circuit Breaker?

The part number for the 1 Pole 80 Amps C Curve 15KA Circuit Breaker is A9N18446.

https://www.schneider-electric.com.au/en/search/A9N18446?category=all

Can a PDL 955RW handle 15A

Yes, it is rated up to 16A

What is the replacement for a Merlin Gerin, 100A, IP42, 24 pole, Switchboard?

The closest alternative is a Schneider switchboard MB224CM1.
Some of the key features are:
  • 24 pole
  • IP42 Rated
  • 160A Main Switch
  • Dimensions 750mm(H) X 580mm(W) X 235mm(D)
  • Supplied with 165A Earth and Neutral Bar with single +/- screw ø6mm tunnels for out going cables up to 16mm² and 2XMB hex head screws for incoming cables
For further information please visit Clipsal - MB224CM1 - MB ISOBAR 24P C60 IP42 160A



 
Show More