Cable Management Machined Brass, 63mm Male to 50mm Female Brass Reducer

Cable Management Machined Brass, 63mm Male to 50mm Female Brass Reducer

Cable Management Machined Brass, 63mm Male to 50mm Female Brass Reducer

Item Number: 1264/6M

RRP (Inc. GST)



Qty UoM EAN Colour



Product brand


Range of product

Series 1264

Product destination

  • diameter: 50-50 mm tube
  • diameter: 63-63 mm tube
    • Sustainable offer status

      Green Premium product



      63-63 mm


    • AS 1721
    • AS 2052
      • REACh Regulation

        Free of Substances of Very High Concern above the threshold

        REACh free of SVHC


        EU RoHS Directive

        Pro-active compliance (Product out of EU RoHS legal scope)

        Toxic heavy metal free


        Mercury free


        RoHS exemption information


        China RoHS Regulation

         Pro-active China RoHS declaration (out of China RoHS legal scope)

        Environmental Disclosure






        Unit Type of Package 1


        Number of Units in Package 1


        Package 1 Weight

        326 g

        Package 1 Height

        66 mm

        Package 1 width

        84 mm

        Package 1 Length

        90 mm
        Show all specifications

        Frequently Asked Questions

        hide show

        What is the dimension of 1264/2M, 25mm (male) to 20mm (female) brass reducer?

        Dimensions of 1264/2M are as follows:
        A = 25mm
        B = 21mm
        C = 16mm

        For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=1264/2M

        What are the dimensions of the wall box to suit the B12/30/6 Multi-Gang Switch?

        The wall box to suit the 12/30/6 Multi-Gang Switch is a 164/6.

        The dimensions of the wall box is a 164/6 are 278mm(W) X 97mm(H) X 58mm(D).

        Some of the key features are:

        • 30 series rocker type
        • B-Style
        • Switch arrangement 6 horizontal and 2 vertical
        • Fascia size: 303 mm Width x 120 mm Height
        • 12 number of switch apertures

        For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=B12/30/6

        What is the maximum wire length for digital inputs and outputs on Powerlogic meters?

        Customer would like to determine the maximum distance between a meter and a digital input source or an output signal receiver 

        Product Line
        ION and Powerlogic meters with digital I/O options

        There is no absolute maximum distance of I/O wiring and actual length depends on several factors including:
        • The field voltage source
        • Wire AWG and manufacture specs
        • Wire type
        • Electrical noise and environment 
        • Meter specs 
        * The calculations below are meant to be a rough estimation and they are not accurate unless all the factors are considered *

        Digital Input Example:

        The PM800 equipped with a PM8M2222 Digital I/O extender with field source of 120 Vac. The wire to be used is a 16 AWG with a resistance of 4.016 ohm per 1000 feet. The PM800's digital input's turn on voltage is 20 Volts and the maximum current draw is 2 mA.

        Vdrop= Current X R (per1000 feet) *2*length
        Vinput= Vsource - Vdrop

        The Vinput needs to exceed the turn on voltage in order for the meter to recognize the signal. In this example, the theoretical maximum would be in the hundreds of thousands of feet. Needless to say, noise as well as other factors will affect the quality of the signal and practically limiting the cable run.

        Digital Output Example

        A similar calculation can be established for digital outputs once the specifications are known. For example, the ION 7650 has a maximum load of 3 A @ 380 VAC, hence the rated burden is 126.666 ohm. The total loop resistance should be less than the rated burden.  A 16 AWG wire has a resistance of 4.016 ohms per 1000 feet and the maximum theoretical distance that would sustain current without significant voltage drop would be 31,500 feet. Moreover, Form A digital output have a similar calculation given the maximum load voltage and current as well as the input source. For example, if the turn on is 20 volts on a PLC and the ION 7650's form A relay is rated at 80mA @ 30 VDC then :
        Vdrop= Current X R (per1000 feet) *2*length
        Vinput= Vsource - Vdrop
        The theoretical maximum attainable distance would be around 15,600 feet for a 16 AWG wire originating from the ION7650's I/O output.