TMX-4D
Cavity fixing  L10190
TMX, Cavity fixing
TMX-4D
Cavity fixing  L10190
TMX, Cavity fixing

TMX Hollow WAll Anchor 4D 8x16-26 Box 100 Pcs

Catalogue Number: 1260066
TMX-4D
Cavity fixing  L10190
TMX, Cavity fixing
TMX-4D
Cavity fixing  L10190
TMX, Cavity fixing
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range of product
Thorsman
Product or component type
cavity fixing
Device short name
TMX
Provided equipment
threaded screw
Mounting support
high load installation in board material - thickness: 16-26 mm
Device application
16-26 mm high load installation in board material
Mounting support
wall mounted
Thread type
M4
Screw diameter
4 mm
Screw length
50 mm
Shape of screw head
  • cross slotted
  • combi-head
    • Screwdriver shape
      Philips
      Drilling diameter
      8 mm
      Colour tint
    • metal
    • grey
      • Quantity per set
        set of 50
        Net weight
        0.0093 kg
        Material
      • screw: steel electroplated
      • cavity fixing: sheet metal electroplated
        • Practical load capacity
        • shear: 400 N 2.5 )
        • pull-out load: 160 N 3 )
          • Thickness
            0-18 mm fixture
            Environmental characteristic
            fire resistance
            Ambient air temperature for operation
            -40-80 °C
            Diameter
            14 mm
            Length
            62 mm
            Sustainable offer status
            Green Premium product
            REACh Regulation
            Free of Substances of Very High Concern above the threshold
            REACh free of SVHC
            Yes
            EU RoHS Directive
            Pro-active compliance (Product out of EU RoHS legal scope)
            Toxic heavy metal free
            Yes
            Mercury free
            Yes
            RoHS exemption information
            Yes
            China RoHS Regulation
             Pro-active China RoHS declaration (out of China RoHS legal scope)
            Environmental Disclosure
            ENVPEP101028EN
            Warranty
            18 months

            Frequently Asked Questions

            hide show

            What is the dimension of 1260025 TMX-4E hollow wall anchor cavity fixing with screw?

            The dimension of 1260025 TMX-4E is 14mm (diameter) x 47mm (length). 1260025 is cavity fixing including fully threaded screw with combi-head and Phillips cross-slot.
            Benefits
            • Captive fixing – stays fixed even when the screw is not tightened
            • Anti-rotation design
            • Pre-assembled screw
            • High load values
            • Fire-resistant
            • Ideal for overhead cavity fixing
            Material and Operative Data:
            Material cavity fixing Expanding part: electroplated sheet metal
            Screw: electroplated steel
            Material mounting tool: Steel and plastic
            Temperature range:  –40°C to 80°C
            For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=1260025
            User-added image

            What is the replacement for 16066 Timer?

            The replacement for 16066 Timer is A9E16066.

            A9E16066
            iRTB relay-delays de-energizing a load upon closing-1C/O - Uc 24-240 VAC/24VDC

            For more information see:
            https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=A9E16066

            What is the din rail mounted timer - wanted to time for 30mins

             The part code is 16066

            What is the new version of the Merlin Gerin 16066?

            The part number is A9E16066.

            What is the replacement for the 16066?

            The replacement part number for the 16066 is A9E16066
            See data sheet for more information....https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=a9e16066
            User-added image

            What is the maximum wire length for digital inputs and outputs on Powerlogic meters?

            Issue
            Customer would like to determine the maximum distance between a meter and a digital input source or an output signal receiver 

            Product Line
            ION and Powerlogic meters with digital I/O options

            Resolution
            There is no absolute maximum distance of I/O wiring and actual length depends on several factors including:
            • The field voltage source
            • Wire AWG and manufacture specs
            • Wire type
            • Electrical noise and environment 
            • Meter specs 
            * The calculations below are meant to be a rough estimation and they are not accurate unless all the factors are considered *

            Digital Input Example:

            The PM800 equipped with a PM8M2222 Digital I/O extender with field source of 120 Vac. The wire to be used is a 16 AWG with a resistance of 4.016 ohm per 1000 feet. The PM800's digital input's turn on voltage is 20 Volts and the maximum current draw is 2 mA.

            Vdrop= Current X R (per1000 feet) *2*length
            Vinput= Vsource - Vdrop

            The Vinput needs to exceed the turn on voltage in order for the meter to recognize the signal. In this example, the theoretical maximum would be in the hundreds of thousands of feet. Needless to say, noise as well as other factors will affect the quality of the signal and practically limiting the cable run.

            Digital Output Example

            A similar calculation can be established for digital outputs once the specifications are known. For example, the ION 7650 has a maximum load of 3 A @ 380 VAC, hence the rated burden is 126.666 ohm. The total loop resistance should be less than the rated burden.  A 16 AWG wire has a resistance of 4.016 ohms per 1000 feet and the maximum theoretical distance that would sustain current without significant voltage drop would be 31,500 feet. Moreover, Form A digital output have a similar calculation given the maximum load voltage and current as well as the input source. For example, if the turn on is 20 volts on a PLC and the ION 7650's form A relay is rated at 80mA @ 30 VDC then :
            Vdrop= Current X R (per1000 feet) *2*length
            Vinput= Vsource - Vdrop
            The theoretical maximum attainable distance would be around 15,600 feet for a 16 AWG wire originating from the ION7650's I/O output.
             

            What is the parts breakdown of a 9001KP1R31?

            Issue:
            9001KP1R31 components

            Product Line:
            Harmony Pushbuttons

            Environment:
            All Products

            Resolution:
            It consists of a 9001KM1 light module, 9001KP operator and a 9001R31 lens.

            Do you do a 238 mounting block with a 50mm entry?

            No, unfortunately the 238/25 has the largest conduit entry with a 25mm entry at each end.

            For further information please visit https://www.clipsal.com/Trade/search-results?q=238/25

            What is the replacement for the 57-0089-000 (2A 250V slow blow) fuse?

            Issue
            Part number 57-0089-000 is no longer active sale. Need something to use in its place.

            Product line
            Modicon Quantum

            Resolution
            57-0089-000 corresponds to Littelfuse 326002, .25 x 1.25 ceramic.

            https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_325_326_datasheet.pdf.pdf
             

            What is the part number for a protective shroud for a XALK178?

            A part number for the shroud to protect accidental operation of the em stop button of the XALK178.....could be ZBZ1602 for black, ZBZ1606 for blue, ZBZ1605 for yellow

            https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=zbz1606
            User-added image

            What are the dimensions of the wall box to suit the B12/30/6 Multi-Gang Switch?

            The wall box to suit the 12/30/6 Multi-Gang Switch is a 164/6.

            The dimensions of the wall box is a 164/6 are 278mm(W) X 97mm(H) X 58mm(D).

            Some of the key features are:

            • 30 series rocker type
            • B-Style
            • Switch arrangement 6 horizontal and 2 vertical
            • Fascia size: 303 mm Width x 120 mm Height
            • 12 number of switch apertures


            For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=B12/30/6

            Generator does not charge my batteries using the XW or SW models?

            Generator is not charging the batteries

            If the inverter/charger qualifies the signal but the unit goes right away to passthrough, please check the following
            Make sure Charger is enabled
            Confirm that the Charger Block Start/Stop is not enabled during the times that you want it to charge

            NOTE:Ex.  If the Charger Block Start is set at 4:00am and the Charger Block Stop is set at 11:00pm, that means that it will not charge between 4am and 11:00pm.
            It would only charge from 11:00pm to 4:00am
            Tip:If there is no need to block the charging then set the start/stop times to 12:00am to disable the feature
            Show More