elbow insp galv cond 32mm

Series 1244 Machine Cast Fittings, Inspection Elbows, 32mm Galvanised Cast Iron

Catalogue Number: 1244/32
elbow insp galv cond 32mm
RRP (Inc. GST)


hide show
Product brand
Range of product
Series 1244
cast iron
Surface treatment
32 mm
Connector type
thread connector
Operating angle
90 °
79 mm
Inner radius
10 mm
  • AS 2052
  • AS 1721
    • Unit Type of Package 1
      Number of Units in Package 1
      Package 1 Weight
      418 g
      Package 1 Height
      4.5 cm
      Package 1 width
      6 cm
      Package 1 Length
      11 cm
      Unit Type of Package 2
      Number of Units in Package 2
      Package 2 Weight
      4.358 kg
      Package 2 Height
      11.2 cm
      Package 2 width
      17.2 cm
      Package 2 Length
      18.2 cm
      Unit Type of Package 3
      Number of Units in Package 3
      Package 3 Weight
      8.36 kg
      Package 3 Height
      20 cm
      Package 3 width
      18 cm
      Package 3 Length
      22 cm
      REACh free of SVHC
      EU RoHS Directive
      Pro-active compliance (Product out of EU RoHS legal scope)
      Toxic heavy metal free
      Mercury free
      RoHS exemption information
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)

      Frequently Asked Questions

      hide show

      Can I get the 242/32 in orange?

      Yes, the 32mm coupling is available in orange. The part number is 242/32-EO.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=242/32


      Does the 1240/25 series come with gaskets?

      No, they are light duty. Buy the 1240HL25 to obtain a heavy duty lid and gasket , or if gasket is required for retro fit then buy 1240GT
      For more information on this product range please visit the Clipsal web site on the link provided

      Video: How do I Setup a Magelis IPC to connect a Pelco Camera?

      Whati s pitch thread for part number 1245/25?

      Pitch thread is 1.5mm

      What is replacement part number for the box only for 9001BR204?

      9001BR station replacement parts

      Product Line:
      Class 9001B Control Stations and Enclosures

      9001B Standard Duty Control Stations

      Replacement enclosure parts (including the case or the cover) are not available for 9001BR devices.

      Is there an end cap available for the 4BB3 ?

      The part number for end caps to suit the  4BB3 is 4BBTC3 ( set of 10 )
      for more information on this product range please visit the Clipsal web site on the link provided

      Do you have a 32mm inspection Tee conduit fitting with out the inspection hole?

      No, unfortunately we only do the 246/32, 32mm, Inspection Tee with the inspection hole.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=246/32

      Can I use a single Altivar drive with 2 motors that are coupled to the same load if the RPM of the motors is different?

      Can I use a single ATV71 drive with 2 motors that are coupled to the same load if the RPM of the motors is different?

      Product Line:
      All Altivar drives.

      All models, All serial numbers.

      Customer had a load sharing application with identical motors.  One motor failed and had to be replaced but an identical replacement was not available.  The RPM of the replacement motor does not match the RPM of the remaining original motor.

      No, this is not recommended.  With both motors being powered from the same drive, they will both receive the same frequency.  The RPM rating of the motor states the number of revolutions per minute the motor will spin when powered with standard frequency power.  If the RPM does not match between motors then the motors will be turning at different speeds when both receive the same frequency power.  This will cause one motor to handle more of the load than the other.


      What is the dimension of 1264/2M, 25mm (male) to 20mm (female) brass reducer?

      Dimensions of 1264/2M are as follows:
      A = 25mm
      B = 21mm
      C = 16mm

      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=1264/2M

      SRT 8 or 10kVA reports Error P.11 or DC Bus Soft Start or event codes 124/125

      Issue: The UPS reports P.11 or DC Bus Soft Start - event 124/125

      Product Line: SRT 8-10kVA Models 

      Clear the Alarm. Turn the output ON again. If the problem persists, Brain dead the UPS. If the alarm reoccurs, perform a UPS Firmware upgrade to the latest 04.7 revision that addressed these issues. For complete upgrade instructions please refer to FA164737.
      Release Notes (UPS 04.7):
      1. Improved system performance of transitions between Online and Bypass operation modes.
      2. Improved system behaviour for three phase input configurations to reduce transitions to battery under certain input feed conditions.
      3. Improved system behaviour to eliminate false detection of DC bus under voltage alarm under certain conditions.
      4. Improved system handling for certain AC input conditions during system start-up.