box junct galv l/d 25mm 2way

Cable Management Machine Cast Fittings, Junction Boxes And Lid Kits, 25Mm, 2 Way

Catalogue Number: 1240/25/2
box junct galv l/d 25mm 2way
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
Saturn Series
Material
cast iron
Depth
40 mm
Shape
round
Surface treatment
galvanised
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)

Frequently Asked Questions

hide show

What is the part number for a plug to suit the 240/25?

The part number for a plug to suit the 240/25/3 is a 220/25.
 

Does the 1240/25 series come with gaskets?

No, they are light duty. Buy the 1240HL25 to obtain a heavy duty lid and gasket , or if gasket is required for retro fit then buy 1240GT
For more information on this product range please visit the Clipsal web site on the link provided
https://www.clipsal.com/Trade/search-results?q=1240

Whati s pitch thread for part number 1245/25?

Pitch thread is 1.5mm

What is the part number of a Junction box with 25mm entry but entries in U shape?

Unfortunately we dont make U entry junction box any more, closest will be 240/25/2A and similar.

Is part number 900/40/25/2 available in Black?

Unfortunately, part number 900/40/25/2 is only available in White & Grey.



 

Is there a P2025/2 with neons?

Yes there is a P2025/2 with neons. The part number is P2025/2N.

Is there a deep version of the 253/25/2 junction box?

Yes, there is a deep version of the 253/25/2 junction box. The part number is 253/25/2D.

Some of the key features are:
  • Deep oblong, draw in box
  • 2 way through entry
  • Dimension: 150 mm Length x 30 mm Width x 42 mm Depth
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=253/25/2



 

Does the 900/25/25 have pre-drilled holes?

No, it does not have pre-drilled holes.
For more information, please refer to the link:​https://www.clipsal.com/Trade/Products/ProductDetail?catno=900/25/25

What is the end cap for the Clipsal 900/25/25

No end cap fitting available for this size 

What is part number for lid to suit 1239/20/4?

Part number 1239L20 will suit any of 1239/20 series.

What is the flush box to suit the P2025/2?

Standard 2 gang flush box will suit -  part number 157/2

What is part number for Brushed Aluminium cover to suit P2025/2?

The part number for Brushed Aluminium cover to suit is P2004/2M -BA

What is the part code for a conduit holder for a 900/25/25

The trunkmate is no longer available

Is there an end plug for the 900/25/25 duct?

No, unfortunately there is not an end cap in this size.

For further information please visit https://www.clipsal.com/Trade/search-results?q=mini%20duct

Is part number 900/25/25 available as dual channel?

NO. Unfortunately, it's unavailable as dual channel.

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=900/25/25



User-added image

What is part number for clip to suit P2025/2?

The part number for clip is a - 154/2.
For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=154/2


User-added image

What is the part number for the cover only for a P2025/2?

The cover only for a P2025/2 is the P2004/2.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=P2004/2 

What is the part number for a mounting bracket for the Prestige double GPO - P2025/2?

The part number for a mounting bracket for the Prestige double GPO - P2025/2 is - 156/2

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=156/2
User-added image

 

Can the ProWORX 32 programming software convert my FasTrak program?

There is no conversion tool in the ProWORX 32 software to directly convert the FasTrak program. For the logic, you can load the FasTrak project to the PLC and read it out using ProWORX 32.

Is there a DDA Compliant Switch?

No, unfortunately we do not have any DDA compliant switches. The closest alternative is the Prestige series, such as P2025 etc, as the mechs are oversized and used
frequently in aged care etc.

Some of the key features of a P2025/2 are:
 
  • Terminals accommodate 4 x 2.5 sq mm cables
  • Large format size
  • 10A
  • 250V
  • P2000 series
  • 116mm X116mm
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=P2025/2


 

Do you do 900/25/25 with a divide in brown?

No, unfortunately this is unavailable.Alternatively we can offer a 900/40/25/2 in White electric.
Some of the key features are:
  • Rectangular
  • Screw or double sided tape fastening
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=900/40/25/2
 

 

Is it possible to change IP address of meters, gateways or communication connections in System Manager Software (SMS) for existing devices, and keep historical data intact?

How to change the IP address of a meter, gateway or communication connection in SMS:
- Take the system offline by clicking on File> Offline
- Click Setup > Communications Connection. The Setup Communications Connection dialog box displays.
- Click on the communication connection that needs to be changed, and click on Configure.
- Change the IP address for the communication connection.
- Click Ok after making the changes, and put the system back online
- Click on File>Online>System

"Cookies not enabled" message when opening Web Reporter in ION Enterprise 6.0

Issue
When opening Web Reporter in IONE 6.0 , the user receives the following message:

Cookies not enabled




Cause

This message can be displayed when there is a '_' underscore in the machine name/computer name.


Workaround

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. 

For ION 6.0 ONLY

- Click on Start> Run
- Type in Regedit
- Go to the following path for 32 bit machines HKEY_LOCAL_MACHINE\Software\Schneider Electric\ION Enterprise\ 6.0
- For 64 bit machines go to HKEY_LOCAL_MACHINE\Software\Wow6432Node\Schneider Electric\ION Enterprise\ 6.0
- Change the value of the registry key 'PrimaryMachine' located in the 6.0 root directory to use the IP address instead of machine name

For ION 6.0 SP1 ONLY

- Click on Start> Run
- Type in Regedit
- Go to the following path for 32 bit machines HKEY_LOCAL_MACHINE\Software\Schneider Electric\ION Enterprise\ 6.0
- For 64 bit machines go to HKEY_LOCAL_MACHINE\Software\Wow6432Node\Schneider Electric\ION Enterprise\ 6.0
- Change the value of the registry key 'ReportServer' located in the 6.0 root directory to use the IP address instead of machine name


Last Revised:November 30, 2012 (AS)

Internal PMO/PMC Support

All content © 1992-2010 Schneider Electric

Is there an alternative for 1239/20/1, Round, 20mm, 1 Way Entry, Light Duty Junction Box?

 Yes, however the alternatives may vary in style, material or number of entries.

The closest alternative in galvanised cast iron is a Junction Box, Round- 20mm I.D, 1 Way Entry, Heavy Duty. The Part number is 1239H20/1.
The closest alternative in PVC is a Junction and Adaptable Boxes PVC- 20mm Entries, 1 Way. The partn number is 240/20/1.

For further information please visit https://www.clipsal.com/Trade/searchround/jbox20MMENTRY1



             1239/20/1                          1239H20/1                           240/20/1