adaptor bs cond 1 1/2in./40mm

Cable Management Machined Brass, 1 1/2 Inch Male To 40Mm Female Brass Adaptor

Catalogue Number: 1235/40
adaptor bs cond 1 1/2in./40mm
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Material
brass
Connector type
thread connector
Product destination
diameter: 40-40 mm tube
Length
45-45 mm
Standards
  • AS 2052
  • AS 1722.2
  • ASC 66.1
  • AS 1721
    • REACh Regulation
      Free of Substances of Very High Concern above the threshold
      REACh free of SVHC
      Yes
      EU RoHS Directive
      Pro-active compliance (Product out of EU RoHS legal scope)
      Toxic heavy metal free
      Yes
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)
      Circularity Profile
      N/A

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • Technical Data Catalogues

      • Installation Instruction

      • Specifications

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      What is part number for lid to suit 1239/20/4?

      Part number 1239L20 will suit any of 1239/20 series.

      What is the thread type on a 1235/25?

      The thread type on a 1235/25 is BS - British Standard.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=1235/25 

      What is part number for socket to suit 1439/4P?

      The part number for socket to suit 1439/4P is 413/4p.

      Whati s pitch thread for part number 1245/25?

      Pitch thread is 1.5mm

      Socket to match the 1439/4P plug?

      The socket to match the 1439/4P plug would be the 413/4P.

      Some of the key features are:
      • Single outlet
      • 50 mm mounting centres
      • 4 pins

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=413/4P

       
       

      Can a Vario switch be flipped upside down

      Yes , but doing so would orientate the handle nomenclature upside down on the handle.

      Do we have protective boots for 9001 K/SK mushroom buttons?

      Issue:
      Do we have protective boots for 9001 K/SK mushroom buttons?
      Product Line:
      30mm Push Buttons                       
      Environment:
      9001K/SK Protective Boots
      Cause:
      Trying to prevent from water getting in the enclosure.      
      Resolution:
      Protective boots are not available for mushroom operators.

      What is the part code for the cord connector to suit the PDL56P320F?

      We do not do one this size and with flat pins in 56 series
      clipsal option (not IP rated)
      438/20-WE - extention socket 20A
      1439/20 - 20A plug
       

      What is the replacement for RE11RMMW Timer?

       The replacement for RE11RMMW Timer is  RE17RMMW

      RE17RMMW 
      time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC 

      For more information see: https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=RE17RMMW

      What is pin configuration for part number 1439/4P?

      The pin configuration for part number 1439/4P- TR

      For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=1439/4P


      User-added image

      Conext SW - Installation/ Wiring issue.

      Issue:

      Customer is installing the Conext SW and wants to confirm the wiring of the AC and DC cabling. 

      Environment:

      Conext SW 2524 120/240 Split-phase (865-2524)
       
      Conext SW 4024 120/240 Split-phase (865-4024)


      Resolution:
       

      See the attached wiring diagrams for the Conext SW and Conext SW-NA.
      Do not mix AC and DC wiring in the same conduit or panel. Consult the applicable installation code for details.
      There are two dual 3/4" /1" trade-size knockouts on the side panel and another two on the bottom panel for AC wiring. Use the same trade size of strain relief as the trade size of the knockout(s) you are using.

       

      What's the difference between the SyMax Model 50 programmable controllers 8005CP50 and 8005CP51?

      The difference between the two SyMax Model 50 programmable controllers is the power voltage rating.
      8005CP50 is a 120/240 VAC Processor Unit.
      8005CP51 is a 24 VDC Processor Unit.


      Legacy KB System (APS) Data: RESL169642 V1.0, Originally authored by on , Last Edited by on
      Related ranges: Sy/Max

      Where can I find line reactor part numbers for the ATV12, ATV312, ATV61 and ATV71 drives?

      Issue:
      Line reactor selection

      Product Line:
      ATV12, ATV312, ATV61 and ATV71

      Environment:
      All models and serial numbers

      Cause:
      None

      Resolution:
      Use the table below to choose the line reactor based on HP, voltage, open or enclosed.




       

      What is the replacement AC coil for CAD32 and CAD50 relay?

      Issue:
      Are replacement  AC coil available for CAD32 and CAD50 relay?

      Product Line:
      Tesys Relays

      Environment:
      All Products

      Cause:
      Product selection

      Resolution:
      Volt = coil part number
      12 = LXD1J7
      21 = LXD1Z7
      24 = LXD1B7
      32 = LXD1C7
      36 = LXD1CC7
      42 = LXD1D7
      48 = LXD1E7
      60 = LXD1EE7
      100 = LXD1K7
      110 = LXD1F7
      115 = LXD1FE7
      120 = LXD1G7
      127 = LXD1FC7
      200 = LXD1L7
      208 = LXD1LL7
      220/230 = LXD1M7
      230 595 21 LXD1P7
      230/240 = LXD1U7
      277 781 30 LXD1W7
      380/400 = LXD1Q7
      400 = LXD1V7
      415 = LXD1N7
      440 = LXD1R7
      480 = LXD1T7
      600 = LXD1X7
      690 = LXD1Y7

       

      Energy Meter shows "Phase Loss" Alarm

      Issue
      Energy meter shows “Phase Loss” alarm on front display.

      Product Line
      Energy meter (EMB and EME series).

      Environment
      Installing/wiring energy meter

      Cause
      If the voltage of any phase is measured as less than 75% of the voltage on any other phase, the display will show PHASE LOSS and indicate the specific phase(s).

      Resolution
      If the energy meter is installed with the proper number of phases (see selection below to determine this) then the phase voltages should be verified. If the number of phases installed is not correct, then the phase loss alarm will be indicated in all operating conditions.

      It’s very important to know the model number of your Energy meter.  
      For example, users see “Phase Loss” error when they use EMB2043 (1 phase, 3 wire) with 1 phase, 2 wire application.

      As a result, it’s very important for users to know their application and use appropriate meter that meets their system type.  Please review the tables below for selecting correct meter.

      Basic 120/240 Volt 208 Wye

      EMB1010 Basic 100A 1 Phase, 2 wire installation 1 CT
      EMB1021 Basic 200A 1 Phase, 2 wire installation 1 CT
      EMB1032 Basic 300A 1 Phase, 2 wire installation 1 CT
      EMB2010 Basic 100A 1 Phase, 3 wire installation 2 CTs
      EMB2021 Basic 200A 1 Phase, 3 wire installation 2 CTs
      EMB2032 Basic 300A 1 Phase, 3 wire installation 2 CTs
      EMB2043 Basic 400A 1 Phase, 3 wire installation 2 CTs
      EMB2083 Basic 800A 1 Phase, 3 wire installation 2 CTs
      EMB3010 Basic 100A 3 Phase, 4 wire installation 3 CTs
      EMB3021 Basic 200A 3 Phase, 4 wire installation 3 CTs
      EMB3032 Basic 300A 3 Phase, 4 wire installation 3 CTs
      EMB3043 Basic 400A 3 Phase, 4 wire installation 3 CTs
      EMB3083 Basic 800A 3 Phase, 4 wire installation 3 CTs
      EMB3084 Basic 800A 3 Phase, 4 wire installation 3 CTs
      EMB3164 Basic 1600A 3 Phase, 4 wire installation 3 CTs


      Extended Range 120/480 Volt Wye

      EME1010 Basic 100A 1 Phase, 2 wire installation 1 CT
      EME1021 Basic 200A 1 Phase, 2 wire installation 1 CT
      EME1032 Basic 300A 1 Phase, 2 wire installation 1 CT
      EME2010 Basic 100A 1 Phase, 3 wire installation 2 CTs
      EME2021 Basic 200A 1 Phase, 3 wire installation 2 CTs
      EME2032 Basic 300A 1 Phase, 3 wire installation 2 CTs
      EME2043 Basic 400A 1 Phase, 3 wire installation 2 CTs
      EME2083 Basic 800A 1 Phase, 3 wire installation 2 CTs
      EME3010 Basic 100A 3 Phase, 4 wire installation 3 CTs
      EME3021 Basic 200A 3 Phase, 4 wire installation 3 CTs
      EME3032 Basic 300A 3 Phase, 4 wire installation 3 CTs
      EME3043 Basic 400A 3 Phase, 4 wire installation 3 CTs
      EME3083 Basic 800A 3 Phase, 4 wire installation 3 CTs
      EME3084 Basic 800A 3 Phase, 4 wire installation 3 CTs
      EME3164 Basic 1600A 3 Phase, 4 wire installation 3 CTs


      NOTE: the meter will operate, however the phase loss alarm will constantly be present if the improper meter is in use.

      XW Won't qualify generator.

      Issue:

      XW inverter charger will not qualify AC generator. AC IN light blinks
      AC input qualification, overloading the generator, unable to sustain battery charging and and running loads (multi-tasking)


      Environment:

      XW 4024/4548/6048 with AC generator


      Resolution:

      1) Ensure generator is split phase 120/240, not 120 monophase or 120/208V. Voltage from (L1 to N) and (N to L2) should add up exactly to (L1 to L2) voltage
      3) Recommended, size your generator 2 times the rating of the XW system.
      2) Ensure no neutral to ground bond in Generator
      3) Connect gen output to AC2, not AC1 and open up AC2 parameters in XW advanced settings - ac settings menu
      4) Reduce max charge rate in XW
      5) If Kohler RES series generator, see  Solution 1179

      Cause:

      1) XW can only connect to splt-ph 120/240 unless converted to monophase 
      2) Potential ground loop
      3) AC2 qualification parameter window much wider than AC1
      4) Gen being overloaded by combination of house loads and XW charger.

      Can a circuit breaker be operated at a voltage less than the voltage marked on the breaker?

      Inquiry:
      Is it OK to apply a circuit breaker on a voltage system rated lower than the rating of the breaker?

      Product Line:
      MCB and MCCB circuit breakers

      Cause:
      Circuit breakers are typically marked only with a few standard voltages, while other voltage systems exist.

      Resolution:
      Yes. According to 2011 NEC article  240.83(E), a circuit breaker may be used at voltages equal to or less than its voltage rating. 
      When applied on a system of lower voltage than marked, he interrupting rating is equal to the next highest marked interrupting rating. 
      The only exceptions to application at less than rated voltage are:
      1. QO and HOM -GFI, -EPD, -AFI, -CAFI, and DF circuit breakers must be applied on 120/240 Vac systems only (they need over 100 Vac to power the electronic modules)
      2. EHB-EPD and EDB-EPD type breakers which must be applied on 480Y/277 systems only

      NOTE:  Circuit breakers marked with DC ratings only are not suitable for application on AC systems, and circuit breakers marked with AC ratings only are not suitable for application on DC systems.

      What is the part number for a Contactor with Low consumption?

      The part number for a low consumption contactor is LC1D09.
      General Product information:
      Range of product TeSys D
      Product or component type Contactor
      Device short name LC1D
      Contactor application Motor control Resistive load
      Utilisation category AC-1, AC-3
      Poles description 3P
      Power pole contact composition 3 NO
      [Ue] rated operational voltage <= 300 V DC for power circuit
      <= 690 V AC 25...400 Hz for power circuit
      [Ie] rated operational current 9 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit
      25 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit
      Motor power kW 5.5 kW at 660...690 V AC 50/60 Hz
      5.5 kW at 500 V AC 50/60 Hz
      4 kW at 415...440 V AC 50/60 Hz
      4 kW at 380...400 V AC 50/60 Hz
      2.2 kW at 220...230 V AC 50/60 Hz
      Motor power HP (UL / CSA) 7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors
      5 hp at 460/480 V AC 50/60 Hz for 3 phases motors
      2 hp at 230/240 V AC 50/60 Hz for 3 phases motors
      2 hp at 200/208 V AC 50/60 Hz for 3 phases motors
      1 hp at 230/240 V AC 50/60 Hz for 1 phase motors
      0.5 hp at 115 V AC 50/60 Hz for 1 phase motors
      Control circuit type AC 50/60 Hz
      Control circuit voltage 415 V AC 50/60 Hz
      Auxiliary contact composition 1 NO + 1 NC
      [Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947
      Overvoltage category III
      [Ith] conventional free air thermal current 10 A at <= 60 °C for signalling circuit
      25 A at <= 60 °C for power circuit



      For more information please visit https://www.schneider-electric.com.au/en/productcontaLC1D



      How do I hardwire 10kva and 20kva transformers in a 208/120 or 240/120 environment

      Issue:
      Implementing a hardwire stepdown transformer in a 208v or 240v environment


      Product Line:

      Smart-UPS / Symmetra

      Environment:

      APTF10KT01, APTF10KW01, and APTF20KW01, All Serial Numbers

      Cause:

      Unbalanced UPS outputs require a stepdown transformer to power 120v loads


      Resolution:

      This document refers to installing  the APTF10KT01, APTF10KW01, and APTF20KW01 transformers in a North American 120/240 or 120/208 environment. For installations in other regions please consult the users manual.

      The wiring block outputs are as follows:


      For domestic use, make sure that the Terminal Block Jumper is installed between the Ground Terminal and Terminal 8 on the output wiring block, as illustrated on page 8 of the user manual. Please also make sure that the input voltage switch is in the correct position.

      The step-down transformer provides 240/120 output as 2 120v hots, a neutral, and a ground. It provides 208v output as a 120v hot, an 88v hot, and a ground. The 120v hot (terminal  7) and the 88v hot (terminal 9) are 180 degrees out of phase. You will measure 208v from terminals 7 to 9. The step-down transformer is not able to provide 2 120v hots that are 120 degrees out of phase as you would see with utility power.



       Note: If your installation requires both 208v and 120v output power you will need 2 separate subpanels: a 240v/120v panel and a dedicated 208v subpanel.

      Lost Neutral - effects on loads and UL1449

      Issue:

      Lost Neutral - effects on loads and UL1449

      Product Line:

      All Back-UPS, Back-UPS PRO and Personal Surge

      Environment:

      Lost Neutral in electrical infrastructure.

      Cause:

      Lifted neutral at utility panel.

      Resolution:

      In a typical balanced load with all loads using the neutral return and the neutral is severed, the voltage from each Phase appears across each load and is added on itself. This is a typical fault condition. Underwriter's Laboratories realized that this fault condition is common and it is not up to the Surge Protection Industry to prevent these failures but in the event of this common failure, UL addressed this condition by requiring all Surge Protectors to pass a fault of 240 VAC at different current levels to simulate different loads. These currents are: 125 mA rms. 500 mA rms. 2.5 A rms. and 5 A rms. They also require an unlimited current test (1000 A rms. or greater). 240 VAC is used because most household wiring is 120/240 3 wire single phase and a lost neutral produces 240 VAC. The unit during this test has cheesecloth wrapped around it. The unit may not emit flame nor can it char the cheesecloth nor can it create an opening in the housing that exposes live metal parts large enough for a child's finger to be inserted. After the test, the unit may not allow leakage currents of > 0.5 mA from Line to Ground and Neutral to Ground also it must withstand a dielectric voltage of 240 VAC for minute between each protected mode. Our units have passed this stringent test requirement in order to get UL recognition and to insure the safety of our customer's lives and property.
       

      Video: How do I perform basic programming on an ATV212?

      Issue:
      Programming Altivar 212 Drive for First Time Operation

      Product line:
      ATV212 or S-Flex 

      Environment:
      All models, all serial numbers 

      Cause:
      Basic Programming for the ATV212 drive.    

      Resolution:



      First set TYP to 2 for 60 hz motors  (doing this first will pre-set many of the other parameters).

      Program the following drive parameters:
      CNOD - START/STOP
          0 = Terminals (most common)
          1 = HMI (keypad Run/Stop buttons)
          2 = Communications (Serial Communication)
      FNOD - Frequency reference
          1 - Ref Source VIA (4-20mA or 0-10VDC)
          2 - Ref Source VIB (0-10VDC)
          3 - HMI reference (keypad)
          4 - Serial Com Ref
          5 - +/- Speed
      AU1 - Auto Ramp Adapt (default is 1, ALWAYS change to 0 unless you understand what it does)
      ACC - Acceleration in seconds
      DEC - Deceleration in seconds
      FH - Max Frequency
      UL - Upper Limit Frequency (High Speed)
      LL - Lower limit Frequency (Low Speed)
      uL - Rated motor frequency
      uLu - Rated motor Voltage
      tHr - Motor thermal protection ( Full load amps of the motor, for overload protection)
      F111 - Terminal F logic input assignment (Programmable input, default = 2; run forward)
      F112 - Terminal R logic input assignment (Programmable input, default = 6; preset speed)
      F113 - Terminal RES logic input assignment (Programmable input, default = 10; fault reset)
      F415 - Rated motor current (Full Load amps of the motor)
      F417 - Rated motor speed (Motor rpms)
      F601 - Current Limit ( Full load amps of the motor multiplied by the service factor of the motor)
      F201 thru F204 scaling the analog input for VIA (sets scale of analog input VIA)
      F210 thru F213 scaling the analog input for VIB  (sets scale of analog input VIB)
      F201=VIA speed ref level 1 (%)                  If using 4-20mA, set to 20%. If using 0-10V, set to 0%
      F202=VIA output frequency level 1 (Hz)     For 4-20mA set to 0, For 0-10V set to 0
      F203= VIA speed ref level 2 (%)                Set to 100% unless you're using less than 10V or 20mA
      F204= VIA output frequency level 2 (Hz)   Set according to max speed (60Hz in the US)

      F210=VIB speed ref level 1 (%)                  For 0-10V set this to 0%
      F211=VIB output frequency level 1 (Hz)     For 0-10V set this to 0
      F212= VIB speed ref level 2 (%)                 For 0-10V set this to100%. If using 0-5V, set this to 50%
      F213= VIB output frequency level 2 (Hz)    Set according to max speed (60Hz in the US)

      There are many other settings and functions available.  
      Note that S-Flex enclosed drives may have different default values than listed here since the programming is often modified to match the wiring in the enclosure.

      Refer to the ATV212 Programming manual S1A53838   https://www.schneider-electric.com/en/download/document/S1A53838/



                                   

      Can a 3-pole breaker be used in a 2-pole application?

      Issue:
      Can a three pole breaker be used in either a two pole or a single phase application?

      Product Line:
      MCCB

      Environment:
      Powerpact and Masterpact

      Resolution:
      • A 3p breaker can be used on a 3 phase system using either 2 or 3 poles.
      • A 3p breaker can be used on a 1 phase system only if indicated by the markings as noted below.
      For reference:
      • Per NEC article 240.85: "A circuit breaker with a straight voltage rating, such as 240V or 480V, shall be permitted to be applied in a circuit in which the nominal voltage between any two conductors does not exceed the circuit breaker’s voltage rating."
      • According to UL's White book, "3–pole circuit breakers are suitable for use on 3-phase systems only, unless marked to indicate use on 1-phase systems, such as, “For 1–phase connections, use two outside poles,” or an equivalent statement. A 3-pole breaker used in place of a 2-pole breaker on a 3-phase system, such as a 2-pole breaker used in a branch circuit that is actually two legs of a 3-phase system, is acceptable without the 3-pole breaker being specifically marked."

      Powerpact P
      • The 3-pole P-frame breaker has a marking on the cover that states "single phase any 2 poles". Therefore on a 120/240Vac system, it is ok to use any 2 poles of a 3 pole P-frame breaker.
      • This breaker marking correlates with the wiring diagram markings of the M and P breaker enclosure, which shows both 2p and 3p applications.
      Powerpact L
      • The 3-pole L-frame breaker does NOT have a marking for single phase systems. Therefore on the 120/240Vac system, it is NOT ok to use a 3 pole L-frame breaker.
      • This marking correlates with the wiring diagram of the L breaker enclosure, which shows only 3p applications.
      Powerpact H and J
      • Three-pole Powerpact H and J-frame thermal-magnetic breakers are marked for single phase use
      • Three-pole Powerpact H and J-frame Micrologic breakers with standard trip units (U31X and U33X) are marked for single-phase use
      • Three-pole Powerpact H and J-frame Micrologic breakers with Ammeter and Energy trip units (U43X, U44X, U53X and U54X) are NOT marked for single-phase use.

      Where can I get support for APC and MGE Products?

      For support on APC and MGE products please visit:  https://www.apc.com/support/

      AC Power
      Additional Management Cards and Options
      Air Cooled Chillers
      Air Distribution Accessories
      Airflow Management
      AIS 3000
      AIS 5000
      AIS Accessories
      AIS Battery Systems
      APC CS
      APC Enterprise Manager
      APC ES
      APC RS
      Application Shutdown Utilities
      Assessment Services
      Auto and Air Inverters
      AV Accessories
      AV Power Conditioners & Battery Backups
      AV Power Filters
      AV Pro Interconnects
      AV Surge Protectors
      Backpacks and Messenger Bags
      Back-UPS
      Back-UPS Accessories
      Back-UPS BI
      Back-UPS CS
      Back-UPS ES
      Back-UPS HI
      Back-UPS HT
      Back-UPS LS
      Back-UPS Office
      Back-UPS Pro
      Back-UPS RS
      Back-UPS XS
      Basic Rack PDU
      Battery Management
      Battery Replacement Services
      Biometric Security
      Bulk Cable
      Cabinet Power Distribution
      Cable Management
      Charge-UPS EX
      Commercial/Industrial Surge Suppression
      Condensers
      Configurable Power Accessories
      Configurable Power Distribution
      Console Port Servers
      CyberFort
      Data Center Facility Cooling - Andover Continuum or TAC Vista
      Data Center Facility Power - PowerLogic ION Enterprise
      Data Center Software Integration Kits
      Data Center University
      Data Distribution Cable
      DC Battery
      DC Components
      DC Distribution Components
      DC600
      Desktop KVM
      Desktop Notebook Stands
      EcoBreeze Air Economizers
      Environmental Management System
      Environmental Monitoring Unit
      Ethernet Switches
      Extended Warranties
      Fiber Optics
      Firmware Upgrades
      FLM Series
      Fluid Coolers
      FRP/Ferroresonant Power Supply
      Game Console Surge Protection
      Gender Changers
      Global Deployment
      Hardwire Surge Suppression Accessories
      High-Density Cooling Enclosures
      IDE Cables
      IEEE1394
      Industrial
      InfraStruxure for Large Data Centers
      InfraStruxure for Medium Data Centers
      InfraStruxure for Server Rooms
      InfraStruxure for Small Data Centers
      InfraStruxure for Wiring Closets
      InfraStruxure Manager
      InfraStruxure Type A
      InRoom Direct Expansion
      InRow Chilled Water
      InRow Direct Expansion
      InRow Pumped Refrigerant
      Installation Services
      Interface Cables
      International Plug Adapters
      Keyboard
      KVM Switches
      Laptop Power Adapters
      Line-R
      Magnum VS
      Magnum XS
      Magnum XS Rectifier
      Maintenance Bypass Panels
      Management Platform Integration
      Matrix Battery Systems
      Matrix-UPS
      Matrix-UPS Accessories
      Metered Rack PDU
      Metered-by-Outlet Rack PDU
      MGE Accessories
      MGE Alpes
      MGE Battery Systems
      MGE Comet
      MGE EPS
      MGE EPS 6000
      MGE EPS 7000
      MGE EPS 8000
      MGE Galaxy
      MGE Galaxy 300
      MGE Galaxy 3000
      MGE Galaxy 3500
      MGE Galaxy 4000
      MGE Galaxy 5000
      MGE Galaxy 5500
      MGE Galaxy 6000
      MGE Galaxy 7000
      MGE Galaxy 9000
      MGE Galaxy PW
      MGE Legacy
      MGE Service Bypass
      MGE Sinewave
      MGE Static Transfer Switches
      MGE UPS 4000
      Microsol Estabilizadores
      Microsol Modules Isoladores
      Mobile Notebook Stands
      Modular Components
      Modular Power Accessories
      Modular Power Distribution
      Monitor
      Mounting Hardware
      Mouse
      MRC1800
      MRE2400
      Multimedia
      MWF1700
      NetBotz 200
      NetBotz 300
      NetBotz 400
      NetBotz 500
      NetBotz Access Control
      NetBotz Accessories and Cables
      NetBotz Central
      NetBotz Rack Access
      NetBotz Sensors
      NetShelter CX
      NetShelter EP Enclosures
      NetShelter ES Enclosures
      NetShelter Open Frame Rack Accessories
      NetShelter SX
      NetShelter VL
      NetShelter VS Enclosures
      NetShelter VX Enclosures
      Network Integration Services
      Network Patch Cables
      NetworkAIR Accessories
      NetworkAIR AFX
      NetworkAIR CM
      NetworkAIR CW
      NetworkAIR FM
      NetworkAIR IR
      NetworkAIR TC
      Notebook Security
      On Site Service
      Open Frame Racks
      Operations Capacity
      Operations Change
      Operations Energy Cost
      Operations Energy Efficiency
      Operations Insight
      Operations Mobile
      Operations VIZOR
      Outdoor Enclosures
      Panelmount Environmental Monitoring
      Parallel
      Patch Panels
      PC1200
      Planning Tools and Publications
      Portable Cooling
      Power Cords
      Power Distribution Units
      Power Generation Systems
      Power Ready Notebook Cases
      PowerChute Business Edition
      PowerChute Inventory Manager
      PowerChute Network Shutdown
      PowerChute Personal Edition
      PowerChute plus
      PowerManager
      PowerShield
      Preventive Maintenance
      Project Management Services
      ProtectNet
      Rack Air Distribution
      Rack Components
      Rack LCD Consoles
      Rack PDU Accessories
      Rack-mount Transfer Switches
      Refrigerant Distribution
      Remote Monitoring Services
      Replacement Batteries
      Replacement Notebook Batteries
      Residential Hardwire Surge Suppression
      Retail
      Retractable Cables
      Room Air Distribution
      Room Cooling Accessories
      Router Cables
      Row Cooling Accessories
      SCSI
      Security Cameras
      Sensors
      Serial
      Service Bypass Panel
      Service Plans
      Silcon
      Silcon Accessories
      Silcon Battery Systems
      SLM/FLM Series
      SmartSlot Expansion Chassis
      Smart-UPS
      Smart-UPS Accessories
      Smart-UPS Battery Systems
      Smart-UPS DP
      Smart-UPS On-Line
      Smart-UPS RT
      Smart-UPS VT
      Software Configuration
      Software Education
      Software for NetBotz Appliances
      Software Installation
      Software Integration
      Spare Part Kits
      Specialty Enclosures
      Start-Up Service
      Stationary Power Distribution Units
      Step-Down Transformer
      StruxureWare Central
      StruxureWare Operations Suite
      SurgeArrest Essential
      SurgeArrest Home/Office
      SurgeArrest Notebook
      SurgeArrest Performance
      Switch Boxes
      Switched Rack PDU
      Symmetra
      Symmetra Accessories
      Symmetra Battery Systems
      Symmetra MW
      Symmetra MW Accessories
      Symmetra Power Module
      Symmetra PX
      Symmetra PX Accessories
      Sync and Charge Cables
      Thermal Containment
      Thick and Thin Ethernet
      Token Ring
      Toploading Cases
      Traditional Cases
      Training Services
      Transceivers
      Transportation
      Travel Mice
      TSP Accessories
      TSP Battery
      TSP/Generator
      TSP/Total System Power
      Tune-UPS for Symmetra
      Uniflair Chilled Water
      Universal Mobile Device Batteries
      Universal Notebook Batteries
      Universal Notebook Power Adapter
      Universal Power Accessories
      Universal Power Adapters
      UPS Network Hub Card
      UPS Network Management Cards
      USB Adapters & Converters
      USB Cables
      USB Charging Cables
      USB Hubs
      Wall-mount Transfer Switches
      Wheeled Cases
      Wireless
      Wizards and Configurators
      WS200