Thorsman TPD, Cavity Fixing, with Screw, Set of 100

Thorsman TPD, Cavity Fixing, with Screw, Set of 100

Thorsman TPD, Cavity Fixing, with Screw, Set of 100

Item Number: 1220104

Retail
$0.77
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Thorsman

Product or component type

cavity fixing

Device application

board material

Colour tint

metal

Warranty

18 months

Physical

Provided equipment

screw

Mounting support

board material

Mounting support

wall mounted

Quantity per set

set of 100

Sale per indivisible quantity

100

Ambient air temperature for operation

-40-80 °C

Length

35 mm

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Environmental Disclosure

ENVPEP1401003EN

Material

Material

  • cavity fixing: zinc electroplated
  • screw: steel
    • Others

      Product name

      Thorsman TPD

      Device short name

      TPD

      Screw diameter

      4.5 mm

      Screw length

      35 mm

      Size of screw head

      8 mm

      Shape of screw head

      cross slotted

      Practical load capacity

    • shear: 270 N
    • pull-out load: 80 N
      • Thickness

        0-12 mm fixture

        Diameter

        4.5 mm

        Unit Type of Package 1

        PCE

        Number of Units in Package 1

        1

        Package 1 Weight

        2 g

        Package 1 Height

        1.3 cm

        Package 1 width

        1.3 cm

        Package 1 Length

        3.7 cm
        Show all specifications

        Frequently Asked Questions

        hide show

        Outputs May Turn On at Power Up When Using a 170ENT11002 with Specific I/O Bases

        Release Notice

        The purpose of this Resolution is to inform users of 170ENT11002 Ethernet Communication Adapters of a condition where outputs could turn on briefly at powerup when mounted on specific digital output bases and combination digital input and output bases.

        •  

        Goals and Symptoms

        170ENT11002s with a DOM (date of manufacture) of 8-2004, mounted on digital DC output bases or combination digital IO bases, may turn on all or some of the outputs for approximately 250ms, when field power is applied simultaneously or prior to module power. The outputs affected during this initial power on cycle, turn off after approximately 250ms and return to normal control.

        Facts and Changes

        Units affected are:
        170ENT110002 with a DOM of 8-2004 through 11-2004 and a PV of 02

        This issue does not occur with:· 170ENT11002s with a DOM of 7-2004 or older
        · 170ENT11000s
        · 170ENT11001s

        Causes and Fixes

        The problem has been eliminated with 170ENT11002s with a PV of 03 or higher or a Date of Manufacture of 12-2004 or higher.


        • Contact your local Schneider Electric office for exchanges.

          For a temporary workaround of affected 170ENT11002 adapters, field power must be off when power is applied to the module. Once module power is applied, field power can then be applied.

        Legacy KB System (APS) Data: RESL167645 V3.0, Originally authored by on , Last Edited by on
        Related ranges: Modicon Momentum

        What is the decibel rating for part number 6220-0?

        The decibel rating is 53db.

        What is the part number for a 20mm steel conduit plug?

        The part number  for a 20mm brass plug for steel conduit is 1220S20.

        What is the part number for replacement ex-fan blades for the 6220-0?

        Unfortunately. The part number for replacement ex-fan blades for the 6220-0 has been discontinued.
        For further information, visit the link below:-
        https://www.clipsal.com/Trade/search-results?q=SP-254-16709

        What is air flow rate for part number 6220-0?

        Air flow rate for 6220-0 is 800m3/h cubic metres

        222 l/s  Litres per second

        Is there a System Word for Scantime in Unity Pro?

        Yes. %SW30 contains the current Scantime of the Master Task. There are also other Scantime system words available, please see the attached document.
        %SW30-47.pdf


        Is there a grid cover for the 6220-0 Clipsal Ceiling Exhaust Fan?

        There is no grid cover plate for the 6220-0. There is, however, the CE250 Ceiling Exhaust Fan which is a similar size, does have a grid cover.

        Link to 6220-0 specifications - https://www.clipsal.com/Trade/Products/ProductDetail?catno=6220-0
        Link to CE250 specifications - https://www.clipsal.com/Trade/Products/ProductDetail?catno=CE250#
         

        Is it possible to get replacement blades for a 6220-0?

        Yes it is.
        The part number is SP-254-16709.
        This is done as a special and will take between 4-6 weeks for delivery.

        For more information, visit the website at www.clipsal.com/Trade/search-results and click on the link to view a brochure.

        Momentum CAD Drawings

        Goals and Symptoms

        Momentum CAD Drawings

        Causes and Fixes

        Momentum CAD Drawings as of 1/20/05

        STB UL Certification, 12/2007

        Goals and Symptoms

        This resolution contains the currently available STB product Underwriters Lab certification as of December 2007.

        Causes and Fixes

        See Attachments for the STB UL certification.

        Attachments


        (Removed File URL: 190462_4842/STB_UL_2007.zip)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/7867fd9951a10ec2c12573be001611e5/fl_block_5/0.586?OpenElement&FieldElemFormat=gif)


        Legacy KB System (APS) Data: RESL190462 V1.0, Originally authored by WeDa on 12/27/2007, Last Edited by WeDa on 12/27/2007
        Related ranges: Advantys STB

        What is the difference between D3 and D voltage code for the low consumption D-Line contactors?

        Issue:
        Low consumption D-Line contactors

        Product Line:
        Contactors and Overload Relays

        Environment:
        TeSys™ D Contactors and Overload Relays

        Resolution:
        Both coils are rated the same DC voltage.  D3 incidcates the coil provides integral transient suppression.

        STBNIP2212 Advantys Ethernet NIM Firmware Upgrade - Exec v.2.30, Kernel 2.03, Web 1.20.04

        Release Notice

        The purpose of this resolution is to inform STBNIP2212 users that the Exec., Kernel, and Web pages have been upgraded to the following:

          • Exec v.2.30
          • Kernel v.2.03
          • Web pagev.1.20.04

        Goals and Symptoms

        A single file named stbnip2212_upgrade_[k]_v.2.03_[fw]_v.2.30_[web]_v.1.20.04.exe, is now available and will automatically run the loader utility program when executed and prompt the user to enter the IP address of the Ethenet NIM. The Exec, Kernel, and web files will load sequentially and then reboot the NIM when completed.

        Facts and Changes

        The new Exec., Kernel and web versions are field upgradable and will work with any STBNIP2212 Ethernet NIM hardware versions. The files for the Ethernet NIM can be found on Planet or as the Attachment to this Resolution.

        Causes and Fixes

        The following issues have been resolved in this upgrade:

        1. Version 2.30 corrects a problem where the Ethernet NIM would sometimes fail to go into Run after a power cycle.
        2. When power is cycled to an ATV31 when it is connected as a prefered module on an STBNIP2212 island, the ATV31 would come back up operational but the Advantys Configuration software would continue to display the ATV31 as failed. With Exec. v.2.30, the Advantys Configuration software will not show the ATV31 as failed after an ATV31 power cycle.
        3. Output values in the 'Data I/O' web page would retain their last value if the client communications was stopped, regardless of the fallback state of the output. In this version, the 'Data I/O' values now show INVALID when this condition occurs.
        4. The STBNIP2212 'I/O Data Values' web page will now display the entire 16 bit field when an Input or Output value is displayed in Binary. The display window on previous versions was too small and would not display the entire 16 bit field.
        5. The 'Save' option in the web page 'Network Interface Module Register' now works properly.
        6. The RS232 serial communications port on the Ethernet NIM would respond to any request, regardless of the address in the request. It now responds to the appropriate address.
        7. The RS232 serial port communications was too slow. Compared to Exec v.2.14, the RS232 serial port communications is now approximately twice as fast as previous installed Exec versions.
        8. Previous firmware versions of the STBNIP2212 had problems reading web page applets using Internet Explorer 7 browsers. These issues have been resolved in v.2.30.
        9. Assigning an IP via DHCP could take a minute and a half or longer. With version 2.30, the time to assign an IP via DHCP has been shortened to approximately 30 seconds.
        10. I/O modules on an island would fail to go into Ready if 15 or more Ethernet connections are made to the NIM during power up.
        11. The 'Process Image area' did not get set to zero if the network cable was removed from the NIM. Outputs would write the last data if the cable was reconnected. In version 2.30, the Process Image area is now cleared if the cable is disconnected and then reconnected. New data from the client is then written to the outputs.
        12. In Ethernet NIM Exec versions 2.27 & 2.28, assigning an IP using DHCP also required a valid Gateway address. If a Gateway address was not provided or was assigned 0.0.0.0, the assigned IP would default to the MAC derived IP address. Exec version 2.30 does not require a Gateway address when assigning an IP via DHCP.
        13. New Faulty Device Replacement (FDR) functionality: (Refer to the FDR User Documentation Attachment below)
          * Multiple FDR servers
          * FDR Functionality
          * Device Parameter file backup/restore
          * FDR Diagnostics
           
        The following Enhancement is included in this upgrade:
        1. A Link failure occurs when there is a disruption in communications between the Advantys Ethernet NIM and the device (ex: PLC) communicating to it. However, the outputs of an island can behave differently depending on where a link failure occurs within a network. Therefore, to allow the outputs to behave the same regardless of where the link failure occurs, an option called Link Failure Mode was added to the web pages for Exec. v2.30 in the Ethernet NIM. Further explanation is provided in the attachment Link Failure Mode Option.
           
        The following is an open issue with 2.30 that will be resolved in the next Exec release.
        1. A behavior has been indentified with version 2.30, which differs from version 2.14. After being on for approximately 15 minutes to 1 hour, the STBNIP2212 will reboot if the Rotary switches are set to "Device/Rolename" (DHCP mode) and no DHCP server is available to assign an IP address. The STBNIP2212 will not reboot if the Rotary switches are set to "Bootp" (default position) or any other position. If a bootp server is available and an IP address is assigned via DHCP, the NIM will not experience a reboot.

          A reboot causes the outputs to go to zero, which is the fallback condition.

        Attachments

        FDR User Documentation

        • (Removed File URL: 191005_4CE2/FDR_User_Documentation.zip)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/cc39d5d1fe079fe1c125760900108a76/fl_block_5/0.5C6?OpenElement&FieldElemFormat=gif)


        Link Failure Mode Option
        • (Removed File URL: 191005_4CE2/Link_Failure_Mode_Option.zip)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/cc39d5d1fe079fe1c125760900108a76/fl_block_5/0.14A8?OpenElement&FieldElemFormat=gif)

        Legacy KB System (APS) Data: RESL191005 V2.0, Originally authored by DaDz on 02/06/2008, Last Edited by DaDz on 08/05/2009
        Related ranges: Advantys STB
        Show More