The part number for 1amp 415v-240v transformer is a ABL6TS25U.
Clarification: not the 10MP.
In theory any panel thickness less than 3.8mm will suit
Hole size is 35.7mm diameter.
The 4 channel dimmers are 2amp and the 8 channel dimmers are 1amp
The part number is: A9D40610
Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.
In the Clipsal range 10mA rated RCBO 10A, 16A,20A,32A, and 40A
Also Slimline RCBO 10mA rated RCBO 6A, 10A,16A,20A,25A, 32A
Please see attachment for codes
No, there are no 10mA RCCBs, only the 2 pole 10mA Slimline RCBOs.
The part number for 20amp 10ma single module RCD/MCB is a 4RCBE220/10S.
10Hp at 200/208V, 10Hp at 220/240V, 20Hp at 460V and 25Hp at 575/600V.
CTA-ID : 2054125
No the only 10mA RCBO's that we have are within the clipsal range
No there is no 10mA RCBO's with in the multi 9 range
We have no 10mA RCCBs available
No. Unfortunately, the part number is not available in 10mA.
The part number for 10amp round flush inlet socket is 435A
The part number for din rail 10amp single switched socket is 4SSO15.
maximum 10mm (solid or stranded).
The part number is 4RCBE220/10s
No unfortunately this part is not available.
Clipsal / Schneider do not make a stand alone RCD with 10mA trip.
The PDL535F is curved towards the floor to reduce its profile. The height from the floor is 10mm at highest point.
The Cable size is from - 10mm - 50mm
This item cannot be DIN rail mounted
You can use the 154 provided you allow a 10mm gap.
It is not available in 10amp version, you can use PDL 56SW120CO which is a 20 amp version.
The part no for the mech is 687M10WH
No, this is a discontinued item and we have no stock left
The part number 30MD into 4031VH to 4036VH plates.
What is the total DC bus capacitance for the ATV960 drive in microfarads?
The DC capacitance for the ATV660/960 is 10mF per brick.
1p: ATV960C11 ... C16: 10mF
2p: ATV960C20 ... C31: 20mF
3p: ATV960C35 ... C50: 30mF
4p: ATV960C56 ... C63: 40mF
5p; ATV960C71 ... C80: 50mF