Dimensions are 190w x 206h x 102d
Clarification: not the 10MP.
In theory any panel thickness less than 3.8mm will suit
Hole size is 35.7mm diameter.
Dimensions 272w x 206h x 102d Please note this product has been obsoleted
Yes the part number is 30MD2
Yes, the part number is 30MD20.
Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.
No You would need to use the 30MD mech in the Saturn 30 series plate.
In the Clipsal range 10mA rated RCBO 10A, 16A,20A,32A, and 40A
Also Slimline RCBO 10mA rated RCBO 6A, 10A,16A,20A,25A, 32A
Please see attachment for codes
No, there are no 10mA RCCBs, only the 2 pole 10mA Slimline RCBOs.
The part number for 20amp 10ma single module RCD/MCB is a 4RCBE220/10S.
The 30MD is available in White (WE), Black (BK)*, Red (RD)*, Chrome Shadow (3S)* and Soft Grey (SG)*.
*Please check with our customer care team for availability as these colours are purchased to order.
No the only 10mA RCBO's that we have are within the clipsal range
No there is no 10mA RCBO's with in the multi 9 range
We have no 10mA RCCBs available
No. Unfortunately, the part number is not available in 10mA.
maximum 10mm (solid or stranded).
The part number 30MD into 4031VH to 4036VH plates.
No, unfortunately we only do a double pole switch in a standard switch mechanism.
For further information please visit
The part number is 4RCBE220/10s
No unfortunately this part is not available.
Clipsal / Schneider do not make a stand alone RCD with 10mA trip.
The PDL535F is curved towards the floor to reduce its profile. The height from the floor is 10mm at highest point.
The Cable size is from - 10mm - 50mm
This item cannot be DIN rail mounted
You can use the 154 provided you allow a 10mm gap.
Board Size - 376w x 392h x 100d Hole Size - 335w x 357h x 80d inc wallboard
This is a 30 module board flush mounting style which comes in white only.
This also replaces the 4FCC24 and 4FCC36.
Please see following link and look under the documents tab for more information and complete range of products.
What is the total DC bus capacitance for the ATV960 drive in microfarads?
The DC capacitance for the ATV660/960 is 10mF per brick.
1p: ATV960C11 ... C16: 10mF
2p: ATV960C20 ... C31: 20mF
3p: ATV960C35 ... C50: 30mF
4p: ATV960C56 ... C63: 40mF
5p; ATV960C71 ... C80: 50mF
Issue: Part numbers
Product Line: BMH
The part number for the power cable for a BMH1003 xxxxxx motor is VW3 M5101 Rxxx . where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(4 x 1.5 mm^2) + (2 x 1 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and free ends on the drive side.
The part number for the feedback cable for a BMH1003 xxxxxx motor is VW3 M8102 Rxxx where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(3 x 2 x 0.14 mm^2) + (2 x 0.34 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and an RJ45 style connector on the drive side.
The 30M Series products have fluorescent capacity of approximately 5A
Both the 30MD and 30MI are not recommended for switching of multiple fluorescent fittings.
For further information please visit https://www.clipsal.com/Trade
You can use a Medilec ML2025RC10-DB
The part code is ML2025RC10
Neither - It is a socket but all Medilec RCD's are 10ma