The Wilco, 10 amp, toggle switch is a WS110-WE
The part number for Multi 10 Gang Switch plate is B10/30/5.
None, (N/O relay contacts)
-10 degrees C to 45 degrees C
No. Unfortunately it is not available.
The PDL151 10 Way 32A Connector Strip Comes in White
Either a 435 which isnt water proof or a 56AI310
Yes, unfortunately this product is now discontinued. The part number is 2T10P0JPEBN6.
No. The ARI030 10 supports Platinum and Nickel RTD's in 2,3 and 4 wire configurations. Pt 100, 200,500 1000 Ni100,200,500,1000 APt100,200,500,1000
No. Unfortunately, there is currently no support for Windows 8 or 10 at this moment.
The part number for a 56 series, 10 amp, socket outlet, with round earth pin is a 56SO310L.
The part number for the 1 Pole 10 Amps 6KA 30mA Type A RCBO is -A9D61810.
Is SoMove compatible with Win10 ?
Starting with version V 2.5.3, SoMove is Windows 10 compatible.
As of July 2014 the ION 8650 has a 10 year warranty.
Please see the attached documents for more information
Issue: The Net Teaming feature cannot be found on the HMIPSP0952D1001.
Product Line: Magelis iPC with Windows 10 Operating System.
Resolution: The Windows 10 operating currently does not support the Net Teaming feature. Therefore the HMIPSP0952D1001 does not support Net teaming.
Neither - It is a socket but all Medilec RCD's are 10ma
Yes, the part name is as follows: 56SW210/2-GY.
Minimum order quantity is 10
There are 10 SL15-TR in a box.
Is Vijeo Designer version 6.2 Windows 10 compatible?
HMI, Magelis, Vijeo Designer
Starting from Vijeo Designer 6.2 SP6, Windows 10 will be supported officially. All the documentation has been updated to reflect this in the Help menus and manuals.
No. Unfortunately, we do not.
ATV58 control board pinout 10 pins vs 9 pins? What is the difference?
All serial numbers
Not sure which pins to use.
10 pin terminal has an additional AO1 terminal located on the left side (not used) . Use the 9 pins on the right side of the terminal strip.
The Sepam 10 output's are rated for a continuous 5A.
Legacy KB System (APS) Data: RESL209698 V1.0, Originally authored by MiZe on 11/17/2012, Last Edited by MiZe on 11/17/2012
Related ranges: Sepam series 10
The M1E Momentum processors are 10 meg half duplex. The 170 ENT 110 01 is 10/100 meg full/half duplex. The 170 ENT 110 00 is 10 meg half duplex..
Legacy KB System (APS) Data: RESL204588 V1.0, Originally authored by MaTh on 02/18/2011, Last Edited by MaTh on 02/18/2011
Related ranges: SMS Add-on
Clipsal has no longer been doing this line of Flame and explosion products for over 10 Years
This went with Gerards, also 10 about years ago, when they left
The Mk2 Black and White can speak to 10 C-Bus networks.
These 10 networks must be interlinked to each other via C-Bus Network Bridges, and not through any other means.
The part number for a 56 series 10amp appliance inlet is - 56AI310-** or 56AI310LE-** (** is the colour code.)
It is an E1 single module size.
No, the 20 amp is the smallest we do - 56SW220CO-GY.
The part number is A9F54163.
Schneider only do the B-Type RCD in 4 pole 63amp
These plug-in bridges can be purchased individually. The Pack Qty (eg. 10) stated in the A4 catalogue is the amount that would come in a complete pack if ordered.
No, XBTL1000 does not support Windows 10. It is suggested to use a Virtual Machine running Windows xP or Windows 7 if you only have a Windows 10 PC.
Officially, Vijeo Designer Runtime 6.2 has not been certified to run on Windows 10 by Schnedier Electric. However, priliminary tests show that there are no apparent limitiations for it to function. If Vijeo Designer Runtime must be run on a Windows 10 PC, we highly recommend to fully test your application before commissioning it.
Update: As of Vijeo Designer 6.2 SP6, all test have been completed to certify that Vijeo Designer Runtime can run on Windows 10.
What timing ranges does the RUW101MW timer module have?
Zelio Relays and Timers
The selectable timing ranges are as follows: 0.1 to 1 seconds, 0.1 to 10 seconds, 0.1 to 1 minute, 1 to 10 minutes, 0.1 to 1 hours, 1 to 10 hours, 0.1 to 1 day, and 1 to 10 days. These timing ranges are selected with dip switches.
See attached for more information.
Rating of contacts is 15A resistive and battery life is 10 years
This item is not available in 9 way. You can purchase a 10 way the part number is B10/30/5-WE which is an indent item.
User needs to know which I/O units are compatible with VAMP 221
The following I/O units are compatible with VAMP 221. Details for each unit are provided below.
- VAM 12L accommodates up 10 arc APS_SENSORS, 3 APS_SENSORS have dedicated trip outputs
- VAM 12LD accommodates up 10 arc APS_SENSORS, 3 APS_SENSORS have dedicated trip outputs
- VAM 10L accommodates up 10 arc APS_SENSORS
- VAM 10LD accommodates up 10 arc APS_SENSORS
- VAM 3L accommodates up to 3 fiber loops
- VAM 3LX accommodates up to 3 fiber loops with sensitivity adjustment
- VAM 4C accommodates up to 3 current transformers
- VAM 4CD accommodates up to 3 current transformers