Acti 9 Smartlink SI B, Modbus TCP/IP and Wireless communication module

Home ProductsCircuit ProtectionActi 9Modbus TCP/IP and Wireless communication module

Acti 9 Smartlink SI B, Modbus TCP/IP and Wireless communication module

Item Number: A9XMZA08

Datasheet

Product Dimensions

Width icon

Width359 mm

Height icon

Height22.5 mm

Depth icon

Depth42 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Acti9

Range

Acti9

Product or component type

smart communication module

Device application

basic energy metering E|improved load monitoring E, U, I, P, Pf|load alarming|load control|breaker status monitoring

Sustainable offer status

Green Premium product

Physical

Protection type

short-circuit protection for analog input|against reverse polarity for auxiliary supply|against reverse polarity for input|overvoltage at 33 V DC for digital output

Inrush current

0.5 A for digital output|3 A for power supply

Local signalling

communication: 1 LED (yellow)|NS (Network Status): 1 LED (green, orange and red)|communication (LK/ACT 10/100): 1 LED (green and yellow)|status: 1 LED (green, orange and red)

Mounting position

horizontal and vertical on DIN rail

Connections - terminals

spring-loaded terminal Ti24 qty: 7 for digital input/output, ordered separately|RJ45 connector qty: 1 for ETHERNET, ordered separately|plug-in connector qty: 1 for supply circuit|plug-in connector qty: 1 for communication bus|plug-in connector qty: 1 for analog input

Clamping connection capacity

2 x 0.25 mm² for twisted shielded pairs cable, flexible with cable end for communication bus|2 x 0.25 mm² for twisted shielded pairs cable, flexible without cable end for communication bus|2 x 0.25 mm² for twisted shielded pairs cable, rigid with cable end for communication bus|2 x 0.25 mm² for twisted shielded pairs cable, rigid without cable end for communication bus|2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid with cable end for analog input|2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid without cable end for analog input|2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible with cable end for analog input|2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible without cable end for analog input|1 x 0.5...1 x 1.5 mm², flexible with cable end for control|1 x 0.5...1 x 1.5 mm², flexible without cable end for control|1 x 0.5...1 x 1.5 mm², rigid with cable end for control|1 x 0.5...1 x 1.5 mm², rigid without cable end for control|2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit|2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit|2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit|2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit

Wire stripping length

control: 10 mm|supply circuit: 7 mm|analog input: 7 mm|communication bus: 7 mm

Communication network type

RS485 Modbus RTU master SUB-D 9 9.6...19.2 kbauds|Ethernet Modbus TCP/IP server RJ45 10/100 Mbit/s

Height

22.5 mm

Width

359 mm

Depth

42 mm

Net weight

180 g

Provided equipment

set of 1 connector|set of 1 power supply connector|set of 1 bus connector|set of 2 locking clips

Range compatibility

Acti 9 iTL auxiliary|Multi9 C60|Linergy Linergy FM|Acti 9 iOF+SD 24|Acti 9 iACT24|Acti 9 iATL24|PowerLogic pulse output meter|PowerLogic Modbus meter|Acti 9 PowerTag wireless energy sensor|Acti 9 RCA iC60|Acti 9 Acti9 iCT auxiliary|Acti 9 Acti9 iC60|Acti 9 Acti9 iID|Acti 9 Acti9 iSW-NA|Acti 9 Acti9 iDPN Vigi|Acti 9 Acti9 C40|Acti 9 Acti9 DT40|Acti 9 Acti9 DT60|Acti 9 Acti9 I-NA|Acti 9 Acti9 ITG40|Acti 9 Acti9 iDPN|Acti 9 Acti9 Reflex iC60 Ti24 connector

Ip degree of protection

IP20

Environmental characteristic

salt mist 2 conforming to IEC 60068-2-52|corrosive 3C2 conforming to IEC 60721-3-3

Relative humidity

93 % at 40 °C

Ambient air temperature for operation

-25...60 °C

Ambient air temperature for storage

-40...80 °C

Reach regulation

Reference contains Substances of Very High Concern above the threshold

Eu rohs directive

Compliant with Exemptions

Mercury free

Yes

China rohs regulation

X

Rohs exemption information

Yes

Environmental disclosure

ENVPEP1403028EN

Circularity profile

ENVEOLI1403028EN

Others

Package 1 bare product quantity

1

Package 2 bare product quantity

32

Product name

Acti9 Smartlink

Device short name

Smartlink SI B Ethernet

Connected auxiliaries

up to 7 wired devices|up to 20 wireless devices

Group of channels

1 group of 7 digital channels|1 group of 1 analog channel

Maximum supply current

1.5 A

[us] rated supply voltage

24 V DC +/- 20 %

Connectivity to devices

analog input|digital input and output|pulse output meter|wireless energy sensor

Communication service

Ethernet Modbus TCP/IP server|web server

Web server

BMS controller compatible|embedded web page

Transmission support medium

radio frequency 2.4-2.4835 GHz PowerTag 20

Web services

web page

Application specific i/o

pulse converter|pulse totalising counter

Immunity to microbreaks

10 ms

Reset

factory reset on front face

Input/output type

2 inputs per analog channel|2 inputs + 1 output per digital channel

Input type

current for analog input, 4...20 mA|voltage for analog input, 0...10 V DC|current sink for digital input, 24 V DC +/- 20 % at 2.5 mA

Maximum permanent current

0.005 A for digital input

Absolute accuracy error

+/- 1 % of full scale for analog input 12 bits

Electronic filtering time

2 ms for digital input from state 0 to state 1|2 ms for analog input from state 0 to state 1

Output type

logic current source: 24 V - DC - 100 mA

Maximum voltage drop

<1 V at state 1 digital output

Location of connection

front

9 mm pitches

0 useful

Commissioning interface

ECOREACH|web page

Compatibility code

Acti 9 Smartlink IP

Pollution degree

3

Electromagnetic compatibility

resistance to electrostatic discharge (air discharge), 8 kV, conforming to IEC 61000-4-2|resistance to electrostatic discharge (contact discharge), 4 kV, conforming to IEC 61000-4-2|resistance to radiated electromagnetic fields (80 MHz...3 GHz), 10 V/m, conforming to IEC 61000-4-3|power supply: resistance to fast transient (5...100 kHz), 2 kV, conforming to IEC 61000-4-4|input/output: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4|communication bus: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4|conducted EMC (0.15...80 MHz), 10 V, conforming to IEC 61000-4-6|immunity to magnetic fields at network frequency, 30 A/m, conforming to IEC 61000-4-8|radiated emission (30...1000 MHz), class A, conforming to IEC 61131-3 Ed.3|conducted emission (0.15...30 MHz), class A, conforming to IEC 61131-2

Vibration resistance

1 gn, amplitude = 3.5 mm (f = 5-300 Hz)10 cycles conforming to IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to IEC 60068-2-27

Fire resistance

other parts: 650 °C ( 30 s ) conforming to IEC 60695-2-10|on connection terminals: 960 °C ( 30 s ) conforming to IEC 60695-2-10

Tropicalisation

2

Operating altitude

0...2000 m

Unit type of package 1

PCE

Number of units in package 1

1

Package 1 height

3.400 cm

Package 1 width

6.300 cm

Package 1 length

36.700 cm

Package 1 weight

304.000 g

Unit type of package 2

S03

Number of units in package 2

32

Package 2 height

30.000 cm

Package 2 width

30.000 cm

Package 2 length

40.000 cm

Package 2 weight

10.215 kg
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • End of Life Manual

  • Environmental Disclosure

  • Installation Instruction

  • Operating Manuals

  • Application Notes

  • Declaration of Conformity

Frequently Asked Questions

hide show

How do you change the Modbus device number on the master Smartlink SI B controller (either in the web page or through the EcoStruxure Power Commission software) from 255 to a lower number?

Issue:

Change the Modbus device number on the master Smartlink SI B controller from 255 to a lower number

Product Line:

Acti 9 Smartlink

Environment:

Smartlink SI B

Resolution:

The Smartlink SI B (A9XMZA08) has a fixed Modbus Address of 255, it is not possible to change it.

The Smartlink - Modbus RS485 slave (A9XMSB11) address can be configure in the range of 1 to 99. You can set the address adjusting the two thumbwheels:

-The left-hand thumbwheel sets the tens.
-The right-hand thumbwheel sets the units.


Modbus RS485 slave address cconfiguration

Smartlink SI B (A9XMZA08) user guide: 
https://download.schneider-electric.com/files?p_Doc_Ref=DOCA0004EN&p_enDocType=User+guide&p_File_Name=DOCA0004EN-06.pdf