How do I wirelessly pair 2 x 755LPSMA4 units together?

Smoke alarm FAQ Clipsal 6

01 January 0001

  1. Choose a smoke alarm as master and apply the Master label.

  2. Use a flat blade screwdriver to carefully switch master and slave alarms on.

  3. On the master, press the Test/Hush 3 times in 2 seconds. The blue network LED should illuminate.

  4. Press Slave Test/Hush 3 times within 2 seconds while the master blue network LED is on. Network LED should flash for 3 seconds.

  5. Both master and slave network LED will flash green for a further 3 seconds indicating successful interconnection.

    Download our step-by-step flowchart (PDF 198 KB)