How to connect ION Setup to an ION meter using a Utiliprob Optical coupler.

FA212049

30/05/2020

Product Line
ION Meters
ION Setup

Environment
Communication

Resolution
Connect the Utiliprobe to the serial port on the back of your computer and the power supply connection to the PS/2 port on the computer.

  1. Start the computer, and open ION Setup.
  2. Use single device configuration mode, and make a serial device connection.
  3. Check the Serial port settings under the Timings tab:
    RTS/CTS = Toggle
    DTR = Disabled
  4. Establish a connection. ION Setup should automaticly determine Baud/Unit ID.

NOTE: If you are having difficulties with connecting, confirm that the device protocol is set to ION