Goals and Symptoms
All three (3) outputs of the 'XMIT' block are simultaneously on at the same time
Facts and Changes
Causes and Fixes
If All three (3) outputs of the 'XMIT' block are simultaneously on at the same time, it is an indication that
the loadable was not installed correctly. The NSUP block was not loaded first.
To resolve the problem:
1.) Delete the' XMIT' block from the ladder logic for the project.
2.) Delete the 'NSUP' and 'XMIT' loadable from the project by using the following steps:
If you are an Electrician or other Trade professional, please login or register below to purchase through your preferred wholesaler. If you a consumer building or renovating, please try our Clipsal@home site