Is it possible to do Ethernet I/O scanning with the Advantys OTB1E0DM9LP Ethernet module?

FA197693

2/07/2020

 

Goals and Symptoms

Yes, you will need to set up the Ethernet I/O scanner in the following way. For this example we are using a Momentum Ethernet processor and Concept.
NOTE: You will want to make sure that the executive in the PLC is up to the latest revision, if not you will not be able to I/O scan.

Causes and Fixes

As noted below the Read Ref Slave address must be 400001 and the Write Ref Slave must be 400101.