Replacement instructions for the front panel display kit for Sepam series 20 and series 40.
Replacing a damaged front panel display
Sepam series 20
Sepam series 40
Normal wear and tear leading to a damaged front display.
This kit is normally dedicated to the Quality Information IQ040421 for Sepam series 20 & series 40 with serial number lower than 0211000. Outside the scope of the quality information, this front panel kit can be used to replace damaged Sepam series 20 or series 40 front panel (scratch, stain, mark or sporadic failure...)
This kit is full compatible with Sepam series 20 & series 40 with serial number lower than 0440000. It is also compatible with Sepam series 20 & series 40 with serial number higher than 0440000 but in this case front face will not be the same : From serial number 0440000, the Sepam series 20 & series 40 are fitted with the new front face (only 1 plastic part instead of 2 plastic parts).
See attachment for replacement instructions:
Legacy KB System (APS) Data: RESL200508 V1.0, Originally authored by MiZe on 11/17/2009, Last Edited by MiZe on 11/17/2009
Related ranges: Sepam series 40, Sepam series 20