NetBotz location information not retained on Pelco camera after reboot.
Botzware version 4.2 and lower that support Pelco cameras
In NetBotz Advanced View, you are able to put specific location information to the NetBotz appliance, all of it's pods, and it's sensors. In the case of a Pelco camera, you can also add the camera to the NetBotz appliance as a shared pod.
We have seen that during a reboot, this location information is not retained for the Pelco camera only. You can re-add this information but it will again be lost on subsequent reboots.
This is resolved in Botzware version 4.3