MASTER YOUR CASTLE with your new build or reno project
Enter competition

Are there any Quick Reference steps for the DG5?



"Manually rotate units in RUG use the following path in the unit addresses as the 1 unit:
Path: Config >> Enter >> Enter (curser at Custom Setup) >> Down Arrow >> Scroll to Page 21 >> Special

Toggle through units in a Shared Display setup:
Path: Help and Network buttons at the same time

Resetting/Reconfiguring Board
Path: Blank Button >> enter (curser will move to the model above Software) >> Temp. and Run Hours at the same time (curser will move below the Software Ver. # >> Down arrow >> enter

Back Door Password
Path: Blank button >> Network and Temp. at the same time >> Down arrow >> this will take you to the section where you can view or alter the 2 level passwords

Factory Menu
Path: Blank button >> Config. >> Enter >> Enter (Curser should be at the Custom Setup) >> Special and Config at the same time

Clearing Alarm History
Path: Alarm History >> Blank Button >> Help

Addressing the Board to the Display
Path: Temp & Humid & Run Hours simultaneously