Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: What fine adjustments can be made for the MICROLOGIC P and H trip unit displays using the keypad?

    Product Line:
    Powerpact and Masterpact breakers with Micrologic P or H trip units

    Resolution:
    Make fine adjustments using navigation keys or network system management software.
    Fine adjustments can only be made for values less than the value set with the switches.
    Fine adjustments cannot be set lower than the minimum dial adjustment or higher than the maximum dial adjustment.
    Fine switch settings are available in the following increments:
    • Longtime pickup 1 amp
    • LT delay .5 seconds
    • Shorttime pickup 10 amps
    • ST delay .1 seconds
    • Instantaineous 10 amps
    • Ground Fault pickup 1 amp
    • GF delay .1 seconds
    NOTE:
    • Using switches to set values after making fine adjustments using the keypad will override the keypad adjustments.
    • Fine adjustments are stored in non-volatile memory, so they are retained if trip unit power is interrupted.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance