in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do I assign Reference Switching to a Logic input in the ATV28?

    Issue:   How do I assign Reference Switching to a Logic input in the ATV28?
     
    Product Line:   ATV28
     
    Environment:  All
     
    Cause:   N/A
     
    Resolution:   
    From factory I/O settings it will be necessary to set the LI4 then LI3 inputs to some setting that is compatible with Reference Switching. Preset speeds are incompatible with Reference Switching. LI4 must be changed before LI3. If not using LI3 or LI4 set them to NO.

    In the I-O menu change the desired logic input to rFC. It will be in Auto and use AI2 or AIC for speed reference when the contact is open. The drive will be in Hand mode and use AI1 for speed signal when there is 24 VDC on the rFC input.


     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance