Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can you convert an ATV320 SoMove file from 3HP to a 7.5HP unit?

     Issue:
    They are replacing an existing motor where the installed drive is ATV320, 3HP and the new motor will be 7.5HP.  They want to keep the same programming and communication addressing and setup.  They have the SoMove files for the existing drive.

    Product line:
    Altivar 320, ATV320 Machine drive

    Environment:
    SoMove

    Cause:
    Change of motor size

    Resolution:
    Yes, you can change the part number or accessories used in the drive (i.e. option cards) using SoMove to maintain the same program settings but change the drive size.

    *Note - make sure you are not connected to the drive.  

    Open the saved SoMove file.  At the top menu, open the Device menu.  Select Edit Topology. 
    A new window opens for you to select a new Reference (part number).
    Once a new number is selected a warning message comes up that a partial factory reset is completed.  Click OK to continue.
    Click OK on the selection window. 

    You can now save the new settings and load into the drive. 
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance