Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you set the IP Address for the BMXNOR0200H module?

    Setup of the IP Address for the BMXNOR0200H

    Product Line
    Modicon x80

    Unity Pro

    In Unity Pro, first configure the BMXNOR0200H module in the PLC rack.
    1. Open the PLC Bus view.
    2. Right-click on an empty slot and select New Device.
    3. In the Part Number column, expand Communication folder to see the available modules, including the BMXNOR0200H.

    Next create a new network by selecting the Network Folder under the Communication folder. Right click the Network folder and select to create new Network.
    In The configuration screen, check the folowing elements:
    1. Model Family: Select the model family for configuration. BMXNOR0200H Family
    2. Under Security tab  enable the HTTP and FTP capability
    3. Module IP Address: Enter into this field the module IP address, Subnet Mask and Gateway IP Address (if used).
    4. Validate your changes

    Finally, link the newly created network to the interface on the BMXNOR0200H module.
    Rebuild your Unity program.
    Transfer the new program to the PLC CPU.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance