Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why aren't the variables in Web Gate Data Scaled like the HMI server with .enableScaling()?

    Issue: Web Gate variables are not data scaled like the HMI server.

    Product Ranges: Vijeo Designer all versions supporting Web Gate

    Resolution: Looking at the finer details in the Online help, the script method .enableScaling() is for External Variables (ie. PLC tags) only. In Web Gate, the tag list is a bit special. They are essentially "internal" tags that get their values over data sharing from the HMI. The HMI is connected to the PLC directly and Web Gate is only connected indirectly through the HMI. This script method will not work as expected in the Web Gate. We could workaround this but it would require some changes to the scripting. We could setup a global action script that would control the scaling (published to HMI Runtime only) that is triggered by a bit. For exampe, this bit would be the way to control within Web Gate. When the user sets the bit, then the the scaling script on the HMI will run. This would the allow the data to get to the Web gate client over data sharing and the HMI and web gate will have the same scaled value

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance