Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What are the default communication parameter for the ION8650 series meter?

    Issue
    ION8650 default communication parameters

    Product Line
    ION8650 series meter

    Environment
    Web Server
    Front Panel


    Cause
    What are the default values the first time you connect to your meter.

    Resolution
    See the following ION8650 series meter default communication settings:

    COM1 Setup:

    Protocol ION
    Baud Rate 9600
    Unit ID From Serial Number*
    RS232 or RS485 RS232
    Serial Port 8N1
    * The factory set Unit ID is based on the serial number of the meter. For example: Serial number: XXX-1009X263-XX is factory set to unit ID 9263


    COM2 Setup:
    Protocol ION
    Baud Rate 9600
    Unit ID 101

    COM3 Setup:
    Protocol ION
    Baud Rate 9600
    Unit ID 102
    Serial Port 8N1

    COM4 Setup:
    Protocol ION
    Baud Rate 9600
    Unit ID 103
    Serial Port 8N1

    Network Setup:
    IP Address None*
    Mask None*
    Gateway None

    * To modify the NONE setting, press and hold the up arrow to enter edit mode.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance