Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the default IP address for the ION7650 Remote Display (M765RD)

    Issue
    User needs to connect to the M765RD remote display, but does not now the default IP address

    Product Line
    M765RD, M765RDPS, S765RD, S765RDPS

    Environment
    Remote Displays

    Cause
    The remote displays for the ION7650 meters have a default IP address based on the MAC address of the device

    Resolution
    To find the default IP address for these remote displays located the MAC address on the label located on the back of the display. After  you have the MAC address follow the steps below. 

    1.) The format of the IP address is 172.16.xxx.xxx
    2.) The last to octets are derived by the last two bytes of the MAC address. 
    3.) Convert the last 2 bytes from Hexadecimal to Decimal
    4.) Insert the two numbers into the format in step 1. 

    See the example below:
    Display MAC address: 00:60:78:01:12:DC

    The last 2 bytes are 12 and DC respectively

    Hex Conversion of the bytes:
    12 = 18
    DC = 220


    Insert the converted bytes into the format from step 1.
    172.16.18.220

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance