Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to Save Changes for a CM3000/CM4000 series meter via the Front panel?

    Issue
    How to save changes for a CM3000/CM4000 series meter via the front panel?

    Product Line
    CM3000 series meter
    CM4000 series meter


    Environment
    Front Display

    Cause
    Would like to know how to save the changes on the circuit monitor front panel.

    Resolution
    To change a value, the procedure is the same on every menu:
    1. Use the arrow buttons to scroll to the parameter you want to change.
    2. Press the enter button to activate the value. The value begins to blink.
    3. Press the arrow buttons to scroll through the possible values. To select the new value, press the enter button.
    4. Press the arrow button to move up and down the menu options. You can change one value or all of the values on a menu. To save the changes, press the menu button until the circuit monitor displays: "Save changes? No". NOTE: Pressing the menu button while a value is blinking will return that values to its most recent setting.
    5. Press the arrow to change to "Yes," then press the enter button to save the changes.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance