Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    SRT 8 or 10kVA reports Error P.11 or DC Bus Soft Start or event codes 124/125

    Issue: The UPS reports P.11 or DC Bus Soft Start - event 124/125



    Product Line: SRT 8-10kVA Models 

    Resolution:
    Clear the Alarm. Turn the output ON again. If the problem persists, Brain dead the UPS. If the alarm reoccurs, perform a UPS Firmware upgrade to the latest 04.7 revision that addressed these issues. For complete upgrade instructions please refer to FA164737.
     
    Release Notes (UPS 04.7):
    ========================
    1. Improved system performance of transitions between Online and Bypass operation modes.
    2. Improved system behaviour for three phase input configurations to reduce transitions to battery under certain input feed conditions.
    3. Improved system behaviour to eliminate false detection of DC bus under voltage alarm under certain conditions.
    4. Improved system handling for certain AC input conditions during system start-up.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance