Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: What causes a "security has been enabled on this module" in Unity Pro?

    Issue: 
    How to enable the security on the Ethernet in Unity Pro. 

    Product line: 
    Unity Pro

    Environment:
    Unity Pro with the M580 or the Ethernet modules associated with it.

    Cause:
    By default, when adding Ethernet to the configuration, the default setting for the firmware update and Web access is disabled and needs to be enabled to clear the error.

    Resolution:
    Follow below steps to resolve this error.

    1. Add Ethernet module to configuration
    2. Add function for the module ETH TCP/IP
    3. Add the network link
    4. Open network up under project browser, you will see that Firmware upgrade & FDR, and Web access (FTP) and both disabled as default.
    5. If you build it will fail with "Security has been enabled in this module".
    6. Go back to the Ethernet link and "Enable" Firmware upgrade & FDR, also "Enable" Web access (FTP). 
    7. Validate and Build project, this will clear the error.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance