Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the small C mean in the upper right corner of the LTMCU display for Tesys T controller?

    Issue:
    What is the small C mean in the upper right corner of the LTMCU display for Tesys T controller?

    Product Line:
    Tesys T, LTMCU, LTMR

    Environment:
    All

    Cause:
    N/A

    Resolution:
    When you are in system config mode, you will see a small “c” in upper right corner of LTMCU.  This would mean that the unit can be programmed.  This also means that the unit cannot be commanded to run unless the system is out of configuration mode.
    To adjust this from the keypad.  
    Arrow down to services and enter.
    Arrow down to config and enter.
    Press enter on end config.  
    Arrow down to yes and enter.
    This will now hide the C on top right corner which confirms that you are no longer in config mode.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance