Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Samsung Lithium Ion Battery; alarm status-LED indication


    Issue:
    Samsung Lithium Ion Battery; alarm status-LED indication
     
    Product line:
    Samsung Lithium Ion Battery
     
    Environment:
    All models, all serial numbers
     
     
    Cause:
    When the operating limits of the LIB system are exceeded, the system will protect itself from failure. System has been programmed with conditions and setpoints (e.g., over voltage, over temp) that create an Alarm or Fault state.
    System provides indications and information about its health and operational status via LEDs on the BMS.
     
    Resolution:
    See chart below of alarm LEDs:
     
     
     
    Resetting the System:
    Reset system after release conditions are met by pressing and holding RESET button for 3-to-5 seconds on the SMPS assigned as System BMS.
     
     If you cannot reset the alarm condition or require further support please call Schneider Electric Technical Support 877-537-0607 

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance